FIPS 140-1 and FIPS 140-2 cryptographic module certification

Has Apple submitted its 128-bit AES encryption module to the Cryptographic Standards and Validation Programs at NIST for certification? If so, and even if under another vendor's name, has it been certified and thus could I have the validation certificate # and module name?
I work for a Federal agency that requires that on-disk encryption of protected information be done so with a FIPS 140 certified module in FIPS 140-compliant operation. I fear having to stop using my Macintoshes and having to switch to Windows XP in order to comply.

Hi, Courtney. Welcome to the Discussions.
See Apple's "IT Pro - Government" page. If you don't find what you need there, there's a link to e-mail the Apple Federal Security Team re: FIPS 140-2.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Similar Messages

HT1423 8gb and two 2 gb memory modules in late 2011 21.5inch imac

Hi is this possible to add one 8gb and two 2 gb memory modules in late 2011 21.5inch imac?

Thanks
Actually I have installed one 8gb module on top of my existing TWO 2 gb factory in built modules. System is working fine though everywhere in the internet it is written that iMac mid 2011 ONLY supports maximum of 4 GB module per slot!!! Then how my system is working? Can I install one more 8gb Module?

Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

Hi.
Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
for more information.
Loader Exceptions:
Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
+ Import-Module <<<< (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
 + CategoryInfo : ResourceUnavailable: (:) [Import-Module], PSSnapInException
 + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
If first loaded DPM 2012 module::
Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
types. Retrieve the LoaderExceptions property for more information.
Loader Exceptions:
Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
an implementation.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
+ Import-Module <<<< 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
ualmachinemanager\virtualmachinemanager.psd1';
 + CategoryInfo : ResourceUnavailable: (:) [Import-Module], PSSnapInException
 + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

Vote if you have same problem:
https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

How do I search and work in the map module without losing my selection

I'm going through my old photographs that predate geotracking and adding my best guess as to their locations via the map module but I'm getting frustrated.
My biggest angst is the selections. In the library module, I look around and find a set of photographs that were taken at the same place and I select them. I then go to the map module and move found, sometimes search, for the place where the photographs were taken. Now, I go back to drop the selection into the map and ... OH NO!!! .. there is no selection. Double angst is I click back in Library and I'm scrolled all the way to the start of my group of photographs.
Deselecting the photos is the biggest UI mistake that Lightroom is making in this sequence. I'm wondering if there is something that I can do to either prevent it or perhaps have a second method of a quick temporary group of photographs.
The other related question I have is if anyone has a suggestion of how to mark these photos as the type of GPS information. e.g. it could come from the camera, it could come via a track log, or it could be just my best guess. Perhaps that is already possible to determine.

When you find the photos you want that were taken in a single location, select them and put them in a Quick Collection (press B)
Then select the Quick Collection and go to the Map Module with the filmstrip turned on. You will then be able to work ONLY with this set of photos that are taken in one location

How to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?

hi frnds.
My problem is in module pool screen how to do ICON_EXPAND and ICON_COLLAPSE input fields in module pool screen?And how to do GUI STATUS and GUI TITLE? IN SE80.
ITS URGENT.POINTS WILL BE REWADED.THANKS IN ADVANCE.

Hi,
Go through this thread.
[expand and collapse|expand and collapse]
Cheers,
Simha.

REQ SAP FI MODULE- CERTIFICATION EXAM QUESTIONS AND ANSWERS

REQ SAP FI MODULE- CERTIFICATION EXAM QUESTIONS AND ANSWERS
Moderator: We should be thankful that you don't require to solve the exam for you

Please type "certification" in the search field, you can find many threads regardding this.

How to find list and cost price in MM module

Hi
Can any one help me in how to find List and cost price in MM module for pricing.
thank you.
David

hi Saquib Khan
Many thanks Saquib Khan for ur reply. Actually iam trying to create a report which displays material number, material description, plant, product hierarchy, cost and list price, based on the selection criteria of a range of materials, plant and also product hierarchy.
If u want to share any information.It would be much better for me.Like iam learning SAP.
thanks.

Sold to Party and Ship to Party Function module or BAPI

Hi Experts,
   1) I need to create customer data,So i need to Function module or BAPI.
   2) Address create data Function module or BAPI.
   3) Sold to Party and Ship to Party Function module or BAPI relation ship.
Thank you ,
Dinesh Reddy
Moderator message: anything else? please search for available information before asking.
Edited by: Thomas Zloch on Oct 14, 2011 3:19 PM

Hi,
Try these Bapis
BAPI_BUS2001_PARTNER_GETDETAIL Get Detail Data for Partner Data
BAPI_BUS2001_PARTNER_GETLIST   Get Overview List for Partner Data
Regards,
Prashant

Functionality wise comparision between ECC 5.0 and 6.0 for QM Module

Dear QM Experts,
Can anybody brief the comprehensive functionality wise comparision along with business benifits between ECC 5.0 and 6.0 for QM Module? For example, what are the diffrence for Quality Notification, Inspection plan, etc and other QM functionalities between 5.0 and 6.0.
Best Regards,
Anand Rao

Hi,
http://erp.fmpmedia.com/Default.aspx?alias=erp.fmpmedia.com/english
This link can be used for same.
Vishal

Pls explain me the use and purpose of following Function modules

pls explain me the use and purpose of following Function modules
1. G_MAX_PERIOD_AND_OFFSET_GET
2. DEQUEUE_E_TABLE
3. FI_COMPANY_CODE_CHECK
4. G_PERIOD_GET
5. alv_display_function
6. G_SET_GET_ID_FROM_NAME
thanks ,
phyrose

1. G_MAX_PERIOD_AND_OFFSET_GET
For given No. of period & periods it gives the offset
2. DEQUEUE_E_TABLE
To Unlock the table records
3. FI_COMPANY_CODE_CHECK
To validate Company Code

4. G_PERIOD_GET
Returns no. of Posting period & Special period for give company code, posting date & ledger
5. alv_display_function -
No such FM exists

6. G_SET_GET_ID_FROM_NAME - Use this module to derive the internal set Id from the name that appears on the user interface, for example, in order then to import the set (see the function group documentation).
The function module first determines a candidate list of sets based on the set name and the class that might have been specified that could match the set name. The class can also be masked (e.g. 000+ for all FI-SL sets, including dynamic sets).

Install and configure Cisco Network Analysis Module NAM-2

Hi,
Does anyone have a step-by-step document on how to install and configure Cisco NAM-2 module ?
Thanks in advance.
Regards,
Lamine

Hi Lamine,
The official installation guides for NAM software can be found here:
http://www.cisco.com/en/US/products/sw/cscowork/ps5401/prod_installation_guides_list.html
Is this what you are looking for?
Cheers,
Shane

Configure the tcode SCOT and SMTP for the SPM module in the R/3

Hello,
I want to know if I have to configure the tcode SCOT and SMTP for the SPM module (SAP GRC AC 5.3 SP5) in the R/3 if I want to send information toe the owner & controller.
Best Regards.
Pablo Mortera.

Pablo,
This would normally be a basis function. Be very careful as this is not specific to GRC.
This will impact any external notifications using email / fax etc.
It will also depend on your version and infrastructure.
If you have web application servers, you will be able to do a lot more than if you have standard (older) application servers.
You need to create a node under the INT and assign the appropriate tcp / ip rfc connection to direct it to your email server.
You will then need to define the types of communications to be sent via that method and any appropriate email domain settings.
You also need to create and set the appropriate send jobs to run periodically which will then automatically call the rfcs to process the waiting documents.
Simon

How to set default currency and Country in R12 financial modules

Hi all,
How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
Can anybody advise ?
Thanks & Regards,

Hi,
Change the below profile for the user to a territory different than the US :
In System Administrator, navigate to Profiles -> System.
Select Site, Application, and Responsibility.
Profile options:
Default Country
HZ: Reference Territory
ICX: Territory
Regards,
Raju.

I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ?

I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ? The communications with the module are OK, because it shows when the current are open or closed.

Jorg,
I noticed that you claimed to be using the module in 0-20mA mode, yet the reading you are seeing is 3.5mA. This is the minimum value (with overranging) when the module is set to 4-20mA mode. My guess is that your module is defaulting back to 4-20mA mode, but your IAK file still thinks the module is in 0-20mA mode. You can verify this by using the find devices button in FieldPoint Explorer and then trying to write to the channel.
To fix this problem, you should use the snapshot feature to change the default power-up mode for that channel.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI

Userexits and sap scripts in PP module

Can anyone give me some examples of user exits and sap scripts in PP module? I need it for my resume. I appreciate your responses.

Dear,
Principle of Dual Control provides an application the option of validating certain process flows with a principle of multiple control.
Please refer this link,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPPDC/PPPDC.pdf
Regards,
R.Brahmankar

FIPS 140-1 and FIPS 140-2 cryptographic module certification

Similar Messages

Maybe you are looking for