FIRE WIRE EXTENS

Hi, I have a rather wierd question. I have these FireWire ports in a PCI slot. It is NOT in the actual PCI slot on the motherboard. It requires a connection to a firewire header. There aren't any on my Motherboard. I have the SB Audigy Gamer. It has built in firewire, but I'd like some more ports for some of my devices. IS there a way I can connect my firewire in the PCI slot to my Sound Card, like an extension? If you have any questions please ask. My specs are as below, very briefly:
P4 2.8 GHz
024MB PC3200
GeForce 4 Ti 4600
SB Audigy
20GB HD

Put the more recalcitrant computer into Target Drive mode by starting it with the T key down until you see the yellow on blue screen. Then connect it to the other machine by firewire cable while both are already awake.
I hope that you did not do any upgrades while you had external drives connected... that is an automatic problem. Always disconnect from externals and accessories before doing any upgrades. Always back up before doing any upgrades.
Firewire networking is not the same as using a computer in Target Disc mode. In Target disc mode, you are using the internal drive of the Td computer as an external. That should allow you to run disk utility. Do use the proper disc utility version for the OSX version that is on problem drive. ie don't use the Leopard disc utility for the Tiger disc or vice versa.

Similar Messages

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

How do you hook up a fire wire video camera to the 13 inch aluminum macbook

I have a 13 inch mac book with only USB, but a video camera that only has a fire wire output jack.
How can I hook up the camera with fire wire out to the USB in on the new 13 inch MB?
Is there an accessory I can buy that will do this? Link to the product?
Thanks!

There is no option/accessory to do this. You'll need to get a different camera, or use a computer with firewire.

I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I hav 260000 mp3 stored on A My Book 3 TB external Fire wire 800 Drive - when I play songs I get short interuptions every 20 to 30 seconds. Can't iTunes handle that?

I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

Install OS 10.2.1 on Fire Wire Drive

If I purchase a Fire Wire Drive and cable, connect to my Pismo, can I install OSX 10.2.4 from a Software Install and Restore disk and use this drive for OSX activity? How should it be set up? Where can I find instructions for such a task?
Mac PowerBook G3 (Pismo), 400MHz, 10GB HD, 320MB Ram, DVD Drive, 2 USB & FireWal Mac OS 9.0.x

Homer, welcome, yes you can, however, I would highly recommend using Carbon Copy Cloner to make a bootable backup of your OS on a separate partition on that external.
Joe
Power Mac G4 Gigabit Ethernet Mac OS X (10.3.9)

Unable to mount external fire-wire hard drive - help, please!

After working the last couple of days to resolve the failure of an internal drive, now one of my external drives (LaCie fire-wire) will not mount. I was using it to back up the bad internal drive, and probably forgot to eject the drive before turning it off; don't know if this really makes any difference, but just in case...
If I use Disk Utility I can see the LaCie drive, but it will not mount.
When I tried to verify the drive got the following message -
Invalid sibling link
The volume LaCie HD needs to be repaired
1 HFS volume checked - volume needs repair
Next I tried to repair the drive, and was told -
Invalid sibling link
Volume check failed
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
This is where I stopped. I read another post somewhere in the forums about making a disk image of the drive, but I'm afraid of making things worse by proceeding without knowing what I'm doing. Any ideas on how I can somehow retrieve the data in the LaCie drive?
Once again, thanks in advance for any help!

Hi! Diskwarrior is always better at repairing drive directories which constitute 99% of all drive problems. I run it fairly regularly usually once a month. BUT I always run it at the first sign of weirdness or problems AND every time I have had a power failure or a forced restart or shutdown because those events usually always damage the drive's directory. Often even though the directory is damaged OSX can go ahead and mount it and it will work ok but eventually the damage builds every time one of those events occur and finally there is a failure to mount or boot. Tom

HP Pavilion Elite m9040n Desktop and Fire Wire 1394

I have the above mentioned Desktop. It has a 1394 plugin on the front of case. Does the Pavilion come with all the software to make fire wire work? I backed up my hard drive onto an Toshiba external disk with a USB cable the other day and it took 6 hours. Isn't fire wire suppost to transfer data faster than a USB cable? Is there any special things I need to know when buying fire wire 1394.
I was looking on the internet the other day and they showed fire wire with 4 and 6 pins. Looking into the hole on my computer it only looks like 3 pins?
Thanks
This question was solved.
View Solution.

Rick, welcome to the forum.
There is no software necessary for Firewire (IEEE 1394a). The driver is installed with the OS.
Here is the Motherboard Specifictions page for the computer. It only shows that there is a Firewire (IEEE 1394a) port (# 11) in the Back I/O ports.
Here is an article that shows the comparison of speed of Firewire vs USB. Firewire was developed by Apple.
I hope this information answers your questions.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Connecting Fire Wire to a G4 400 PCI to Use Migratiion Assistant

I get a window saying the the fire Wire will not connect to the G4. I want to transfer the Data from the G4 to the iMac, but it won't connect through Fire Wire.

The following models can be used as target computers:
iMac (Slot Loading) with Firmware version 2.4 or later
iMac (Summer 2000) and all models introduced after July 2000
eMac (all models)
Mac mini (all models)
Power Mac G4 (AGP Graphics) with ATA drive
Power Mac G4 Cube
Power Mac G4 (Gigabit Ethernet) and all models introduced after July 2000
Power Mac G5 (all models)
iBook (FireWire) and all models introduced after September 2000
MacBook (all models)
PowerBook G3 (FireWire)
PowerBook G4 (all models)
MacBook Pro (all models)
Is your G4 in the above list? If so, then please clarify your problem.

Fire wire or usb Connection for external disk dvd disk drive

is it worth the extra money buying a external dvd re-wrighter with fire wire connection rather than the traditional usb connection? would it work like a normal disk drive as my internal dvd/cd drive is broken.

Thanks SCB and malcom
Ive got a budget of around £100 to spend and have been looking at a lacie dvd+16x light scribe 4.7gb/8.5gb with fire wire. Any idea if there any good?
Pioneer any models i should be looking for?
thanks

Fire Wire Error Message:

If anybody has been following my posts, I have been wanting and needing a fire wire enclosure for large hard drives. I only have one of each. A Fire Wire enclosure and a 3.5 PATA drive. A Maxtor 160gb. I have other hard drives and they are smaller, and have issues. Fortunately OS 9 is able to mount these damaged drives.
I am very happy to have a fire wire enclousre and also a new hard drive for my files. =] =] And I still have like a bunch of files to organize but the most important thing right now is to get all of these files off of three messed up hard drives.
I have one hard drive connected to a USB enclosure and the new 160gb one is connected to the Fire Wire enclosure. (It also has a USB 2.0 port but I am connecting it to Fire Wire) and I am running OS 9 while operating all the external hard drives.
As for the fire wire enclosure: I get an error message:
A FireWire disk has stopped responding. The problem must be corrected to prevent damaging the disk's contents.
Please check all FireWIre connections. If you added, removed, or turned on a FireWire device on or off, try undoing what you did.
And so I turn off the drive and turn it back on. It acts like nothing has happened to it. But certainly something bad is happening!!! =S
Also it has done this in the middle of transferring files and then I turn it off and on and then it resumes moving THE SAME file!!!!!!! =S
????????????????

Could the problem have been the USB-only enclosures??????? I have tried to get it to work a few minutes ago and it would not turn on. I gave up on it and I disconnected it. I am moving files from the damaged hard drives onto that imac's internal hard drive, and then onto the new hard drive ... all using the same fire wire enclosure. I have one so far and not two... and that is kinda frustrating. =S }=S }=S
Even though I have to keep switching hard drives with one fire wire enclosure, the fire wire enclosure transfer speed is now FAST!!!!!!!!
=]

HT5299 I have a Gdrive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my MAC air or LaCie drives. Help

I have a G drive mini and 2 LaCie hard drives that connect fine using USB. Thunderbolt to fire wire 800 adaptor will not connect to either my iMAC or Mac air or LaCie drives. Help

Have you tried any of these soundcards designed for 2.0?
The 3.0 port is categorically designed to be comoatible with all 2.0 devices. The port itself will adapt to the usage parameters of the device.
But if you really want to downgrade, then simply plug any 2.0 hub into a MBA 3.0 port. The ports on the hub will be 2.0.

Fire wire

my fire wire doesnt recognise a camera or a hard disk can i get it repaired or do i need a new card!!??

Hi, whiteyblast, and welcome to the Discussions!
Try resetting FireWire by disconnecting your FW cables/peripherals from the Mac, then disconnecting the Mac's power cord for about ten minutes. Then reconnect, power up and try it again.
Also, try a PRAM reset.
If it's truly dead/defective, you'll need to add a PCI card, since native FW is hard-wired to the logic board.
Gary

Fire-wire power supply?

Hi, just a short question. Can I use my fire-wire power supply and the appropriate cable from my 4th gen. classic ipod (monochrome display) to charge the battery of my ipod nano 3rd gen.? Or do I have to use a new USB power supply?
Thank you!
Mike

Yes. I do it all the time. I have an old firewire cable and AC brick (I bought the first version of the iPod Photo which came with ALL the pack ins) which I use to charge my 3rd gen Nano, Touch and 5th gen iPod.
Best of luck.

Fire wire cam doesnt work im messages chat

my fire wire Unibrain cam does not connect in messages chat and I cannot receive the other persons cam
. Are there settings I should correct. I am using 10.8.4

HI,
So you are getting video in to the App.
So any Firewire 400/800 issues are moot.
Next step.
In the Video Menu is the Video option dark and active text and is it ticked ?
In the View Menu is Show Video Status ticked ?
This Menu and the items from show Buddy Pics down rely on a Buddy list being "front" (More on that in sec).
The first of these makes sure the camera is On and the second makes sure the Buddy Lists display the Video icons.
If there is not enough Internet Speed for Video Chats then the Video items may be ticked but greyed out.
To make sure you can see the Buddy Lists go to the Window Menu.
If you have set up iMessages and nothing else except Enable the Bonjour account then the Buddies item will dispaly the Bonjour list.
If you have AIM, Jabber or Yahoo IDs set up as well then the Buddies item is a combined list.
You can unlink them in the General section of the Preferences.
The Window Menu will change to list the Buddy Lists by the Description Fields in the Accounts section
An AIM Buddy list for example should display green Video icons next to the Buddies.
In this my other logged in AIM valid Names show up under Family and an Apple Test accounts shows in Auto Responders (you can't Video with yourself but you an add the Buddy name to a Buddy list).
Only Jabber Buddy list will do this as well as the Yahoo option is Text only.
However it does have to be AIM to AIM or Jabber to Jabber.
AIM in this sense includes the Apple Issued IDs with the ending of @mac.com, @me.com and @icloud.com
Jabber ones can include GoogleTalk and Facebook IDs if you have Enabled Talk at Google or Chat at Facebook.
Sticking with the AIM case you would then click on the green video icon as one method of Starting a Video Chat.
As it is an AIM Buddy list the Buddy should be an AIM vlaid Buddy.
Note
Apple IDs obviously have an @ in them and in most cases are valid emails (or have been in the past)
They are valid with the AIM service
GoogleMail IDs are then valid Jabber IDs once you enable Talk in Products at Google. Facebook also uses the users email Address.
The can means that fro both services an email address is the valid ID.
Other Jabber IDs may not be email but do follow the [email protected] format.
This means it is possible to add the IDs or Screen Names from one service to the Buddy list of another.
The Buddy will appear Off line in these case but you will not be told they are not a valid Buddy.
If the chat fails at this point you normally get some sort of alert message.
It may even have pop up that can be expanded for more details.
You may see more in the Video Menu > Connection Doctor > Errors tab
If you have an AIM Buddy list then try adding the Apple Test Accounts. See table 1
There used to be 6 (three plain AIM names and three @mac.com versions).
It tends to be that only 1 or 2 are On at any one time now.
Can you connect to this "Buddy" ?
8:22 PM Wednesday; July 17, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

FIRE WIRE EXTENS

Similar Messages

Maybe you are looking for