Fireface 800 Operation

Hello,
I am having a difficult time understanding how my rme fireface 800 controls the volume output of my imac.
Is there someone out there that has a fireface 800 that would be willing to help me understand a couple things?
I have the rme fireface 800 connected to my imac via the firewire 800. I have Dynaudio powered monitors connected to outputs of the fireface 800 7+8. All I'd like to do is have the fireface 800 control the output with the master fader of a mackie control universal pro. I just purchased the mcu recently to use with logic studio and to have the capability to control my itunes and logic output with the mcu fader instead of the software mixer. It is a PITA to control volume with a mouse.
I guess I don't understand how to setup the patchbay in the fireface software. I have read the manual and it is pretty difficult to understand, at least for me.

If you haven't found the answer you're looking for yet, I would first make sure you have the Fireface Mixer setup correctly.
If you have your Dynaudio monitors connected to outputs 7 & 8, you would have to make sure the faders in the Fireface Mixer middle row (Playback section) are sending a signal to the Analog Output of the Fireface Mixer which is the bottom row.
Under every fader in the middle Playback row, you'll see where that fader is sending it's signal to. Since most every program will default to sending signals to the analog outs of the Fireface 800 via Out 1 and Out 2, make sure these outputs are sending their signals out through AN 7+8 since you have your monitors connected to the outputs 7 & 8 of your Fireface 800. Every output channel in the middle row of the Fireface mixer has it's Analog destination so you would just click underneath the fader to change the destination.
After you have that set up correctly you can bring your mackie control into the picture I believe.

Similar Messages

Problem installing RME Fireface 800 drivers iMac OS X 10.8.5

Hi,
The drivers for the RME Fireface 800 audio interface will not install on my iMac.
iMac 3.06GHz Intel Core 2 Duo, 4GB Ram, OS X 10.8.5
(I have also borrowed a Fireface 800, which works, from a friend so it does not seem to be a problem with my audio interface).
I downloaded the latest drivers from the RME website and the installation proceedure appears to go smoothly but the drivers are not installed (and no sign of the two programs that usually install; the mixer application and the application for choosing the inputs/outputs etc..)
The Fireface 800 and iMac were both working happily together using OS X 10.5 but the iMac hard drive had to be replaced and the operating system has been upgraded to OS X 10.8.5.
I am trying Onyx to see if it clears this up.
Please help me. Thank you.
Ben

Hi,
Onyx is asking: Where is System Events.app
Does anyone know how I should action this or if this could be linked to the issue with installing drivers and if so what I should do?
Thanks
Ben

Missing Outputs RME Fireface 800

Hello:
I cannot see output pairs in Soundtrack Pro under the recording tab. I can see the RME Fireface interface just fine (as well as some of the built in ones, too) but there are no channels specified.
Could any tell me how to fix this, or is it a limitation of Soundtrack Pro?
Thanks.

The only thing you need to be sure of is you are using 800cFirewire and not 400 Firewire it can and will make a difference in the operation of the Fireface 800.
CHEERS
DON

RME Fireface 800 and Final Cut Pro

Hi Forum
I have a RME Fireface 800. Trying to make it record in Final Cut Pro 6.05 and Soundtrack Pro. I't won't. Only through built in Mic can I record in FCP (or Line-in in iMac)
When using Fireface as default sound device, I see an input signal on the unit and I can hear output but ONLY through headset. I've been trying to fiddle with the settings in the Fireface Mixer but with no luck. (Everything works as it should in Cubase)
Fireface 800 connected through external hardrive, LaCie.
(Fireface 800 doesn't work if I plug it directly into the iMac, something with the firewire chip, they told me at the music store when I couldn't get Cubase 5 to work - it now works with that setup)
I'm using firewire 800 cable. Anybody can help me out?
All the best, Ulrich

Did anyone have to roll back their firewire drivers to get the FireFace to work with OSX 10.4.10 on Intel - as mentioned here for a competing product?
http://forums.mackie.com/scripts/forum/ultimatebb.cgi?ubb=get_topic;f=27;t=00145 4

RME Fireface 800 in 64 bit Problem

Using information helpfully provided by Kappy and The Hatter on this forum (see topic https://discussions.apple.com/message/27751034?ac_cid=op123456 if interested) I found that I was able to get my Mac Pro (early 2008) 3,1 to boot in 64 bit mode, and that Logic Pro 9 could also be made to open and work in 64 bit mode.
I am currently using OSX 10.6.8 Snow Leopard, but am waiting for 10.8 Mountain Lion to be “delivered” (by email) so that I can use Arturia’s V Collection 4 and their Keylab 61 USB MIDI keyboard controller, both of which require Mountain Lion. V Collection 4 is 64 bit only, which is why I want to use 64 bit.
It all seems to work except my RME Fireface 800 interface, which is not recognised in 64 bit - red light on the FF800 unit and the associated software will not open. The FF800 works fine when I go back to 32 bit on the Mac Pro.
Does anyone here know about the issue with 64 bit and the RME Fireface 800 please? Maybe it just needs updated drivers? I have emailed RME and await their reply but it made sense to ask here as well.
Any help would be much appreciated.
Thanks
Steve
[By the way, I have checked, from very helpful people on this forum, that Mountain Lion is compatible with my Mac Pro, and that the Mac Pro does have 64 bit kernal]

Just needed to download up-to-date driver and flash firmware. Solved with the help of RME support. :-)

RME FIREFACE 800 COMPATABILITY

I recently bought a new iMac and Logic Studio 8. I'm shopping for a firewire interface and was wondering if anyone could give me a difinitive answer on whether or not there are any compatability issues with the RME Fireface 800. I'm using a new (I believe it was made 2/08) iMac and Logic Studio 8. I'm leaning toward a used RME 800. Are there any differences in compatability with a new RME 800 vs. a used one? Any info would be greatly appreciated.

I would strongly recommend also checking out the Metric HALO units. I owned an RME FF800 for a while, and it is a fantastic interface with great flexibility and converters, but if you can get buy with fewer connections, you can go with the Metric HALO ULN-2, which has pre-amps that rival boutique amps costing (by themselves) as much as the whole Metric HALIO interface.
If you need a lot of connections, you can go with the 2882, which has more I/O, but preamps only as good or slightly better than the RME unit.
I will tell you that after using the RME for a couple of years, I auditioned the Metric HALO and like it better...but that is just MY preference.
BTW, if you check it out, look at the EXTENDED version (that is what I have). The 2d card is astonishing, and particularly, the "character" settings are to die for.
I have a modest home studio, and this track was done COMPLETELY with Metric HALO and Peluso and Rhode mics. The compliments that I received on the guitar sound were better than the tracks on another song that I did with API pres. Go figure.
http://www.soundclick.com/util/streamm3u.m3u?id=6664479&q=hi

RME Fireface 800 Help

I'm gonna be short and sweet on this one, sorry.
Me and a few colleagues recently purchased the RME FireFace 800 Interface with a multitude of other things to start a label. Our problem is we cant seem to get Adobe Audition 3 to recognize/record with the interface. Were thinking its something dumb we overlooked in the settings of something. Any help is appreciated. We are running Windows Vista (:( brand new comp, sorry.), with enough memory and such.

Is the 'host' light on the FF800 red? If so, then the computer is not seeing the FF800 (or more accurately, the FF800 is not seeing the computer). The host light SHOULD NOT be lit when a proper connection is established. Are you running the latest drivers for the FF800 (2.86)? Can you see activity in the RME TotalMix app (for FF800, it is called FireFace Mixer)? If so, click <Ctrl> preset 2 in the FireFace settings to load up the factory preset that routes all inputs 1-to-1 to the outputs and also a headphone mix. If all that is working and you can hear inputs in the headphones connected to the FF800, then you should be able to choose the FF800 in the list of devices for the MultiTrack and Edit tabs under device setup in AA3. --Dean

Send & Return with Fireface 800 not working with Logic 8

Hello all.
I'm having a bear of a time setting up an FX loop from Logic to a FireFace 800. I suspect the problem is in Totalmix, but I can't seem to configure that at all.
Trying to route Track #1, through the FF and into Helicon VoicePro, then back to Logic's Track #4.
Here's what I'm doing:
- In Logic, Track #1, in Mixer window, setting Send to Bus #2.
- Bus #2 is set to Outs 3-4.
- Fireface outs 3&4 go to the Helicon
- Helicon outs go to Fireface input 7&8
- In Logic, track #4 is set to Input 7&8, Out 1-2.
I'm NOT using the I/O plugin, just the normal I/O selectors.
I get no signal to the Helicon with the above setup. However, if I change the Fireface cabling so the outs are 1&2, it goes through the Helicon just fine (the only problem is I get an echo-loop as the signal is feeding through over and over again). So, the Helicon works, the problem is at the Fireface, and I suspect it's because I can't get Total mix to route. The Fireface manual is worthless for this, I've followed the one paragraph of advice and it doesn't work.
Does anyone know of another way to route the signal? Or any tutorial for Totalmix?
All I want to do is send, add FX, then return to a new track.

R u recording midi input into the track? (ez drummer takes midi info and feeds it into the plug-in (drum samples) for output. of course, you can route the output from ez drummer to an audio track to record the audio output. But working in midi allows you to edit your midi files, change drum sounds, etc.

MacPro with RME FIREFACE 800 ?

Hy, I would like to know if the MacPro-RME Fireface 800 couple is a good one.
Is there any issues, how about stability and latencies.
Thanks for Fireface users help.
regards

Hy, I would like to know if the MacPro-RME Fireface 800 couple is a good one.
Is there any issues, how about stability and latencies.
Thanks for Fireface users help.
regards

Rme fireface 800 ?

anyone know of a dvd or vidio on the rme for best way to set it up for useing with logic .

I was told to turn off software monitoring in logic as this would be better if I was using total mix. When I did this my plugins for audio tracks don't work. I'm having a hard time fully understanding Total Mix. If you had my set up how would you set your preferances in logic and total mix?
I have a iMac G5 2.0 ghz w/2 gigs of ram running latest OSX. Fireface 800.
I use logic pro to record electric (LP,Strat,Carvin TL60 or acoustic (Ovation Legend) through the single instrument input on the FF800. I like this unit it sounds great.
Any help would be appreciated
Max
iMac G5 20" 2.0 ghz Mac OS X (10.4.5) 2 GB RAM

Fireface 800 I/O labels

I'd like to replace my Fireface's default I/O labels (Input 1, Input 2 and so on) by a more descriptive label (Alog In 1, ADAT Out 6 etc.). I suppose this has to be done manually in the Audio Configuration window. Does anybody know an easier way to accomplish this?
PowerBook G4 1.67 Mac OS X (10.4.5) RME Fireface 800, Logic Pro 7.2

I don't know ? It works fine here. you type in your custom name, make sure the button is checked and the new name comes up in the mixer

Fireface 800

Hi Guys,
I need Help, I just got a new Fireface 800, installed the drivers an the firmware 2.04 but the FF800 disconnects and connects constantly after a few seconds.
Can somebody give some assistance or guide me please.
I already tried RME forum with no success
Cheers
Luis

I Reinstalled tiger and connected the FF800 via firewire 800 as you suggested and everything works fine. Sorry for the panic.
Now is working stable but I have a couple of questions.
what are the usual setting of the FF800 I just have a 2 keyboards connected
Virus is connected to the inputs 1 and 2 of the FF800 the second keyboard is connected to the inputs 3 and 4 of the FF800.
The powered monitors are connected to the outputs 1 and 2 of the ff800.
How to control de main volume via the volume know on the ff800?
is there a preset in the ff800 tha controles this I already try preset 2.
sorry for my ignorance i was used to work with the 01x before
thanks for all the help
cheers
Luis

Fireface 800 into MBP 400 port expresscard 34 fw800 dual port

i am getting a fireface 800 finally. thanks wife, thanks band paying half.
okay. on my MBP i have a fw 400 port ( plug RME in here ). then i was going to use my lacie fw 800 drive via a belkin expresscard dual port fw800 expansion bus.
what do you guys think about this? can i get 8 tracks at one time at say 48k with this setup?

cool. i am going to get the dual card and setup a fw800 raid 0 when i get the money, i am trying to use what i have. i really hope that i can get 8 at a time with this. it is crucial to my project.

Fireface 800 users, 5.1 Monitoring?

For all the Fireface 800 users out there...
Is the 800 capable of monitoring a 5.1, 7.1 etc. setup / mix... i.e. the Main Master Output Volume... can you link say Analog Outs 1-6 to this Main Volume and use it to monitor and control the attenuation of the 6 speakers?
I can't seem to get a straight answer from the manual... any help / insight is appreciated.
Thanks

hello,
I work with Karine on this...The ACS view is available but no information is provided once its ACS view is launched...How can we thell if we have ACS Enterprise or the ACS Express ? What s the difference between them ?
Thank you
IN

Aggregate device on the same firewire bus (fireface 800 and Lightbridge

Hi,
I'm trying to set up a aggregate device with my old RME Fireface 800 (on the firewire 400 bus) and this new M-Audio Lightbridge. But allthough I manage to create the device, there is no sound at all. The Fireface acts as digital master via a word clock cable. The Fireface are connected via a 10 m. cable to the rear connection (on my nes Mac Pro) and the Lightbridge are connected to the front. I know it's the same bus using those two connectors, so do you think a separate firewire board would be a solution?
Regards Stig

So the firewire "bus" and a firewire "interface" are the same thing then? Excuse my ignorance, I've just been put in the position that I needed to know this for the first time with this audio interface problem. The things I used my firewire ports for just worked without me having to learn much about it up until now. Also, I found some posts that the card had some issues functioning in a version of Leopard. I'm about to upgrade from Tiger (finally) directly to Snow Leopard. Do you (or anyone else who sees this) happen to know if there are any issues there? I appreciate the help very much Rod.

Fireface 800 Operation

Similar Messages

Maybe you are looking for