Firefighter doesnt start

Hi guys,
I need your help regarding firefighter aka SPM 5.3.
I have just finished configurating the firefighter but the firefighter user doesn't pop up. When I try to log into the firefighter user with my assigned firefighter ID and enter a reason code and possible activities and press "choose" nothing happens.
The role that is assigned to my user is /VIRSA/Z_VFAT_FIREFIGHTER and I removed the RFC destiniation according to note 1143955.
The configuration of SPM 5.3 looks like this:
Send Firefighter Login Notification Immediately     YES
Assign FF Roles Instead of FF IDs                     NO
Remote Function Call                                                     M03
Any help for solving this issue is greatly appreciated.
Thanx,
Max

I solved this problem by myself ... the firefighter user was defined as a system user and I changed it do Dialogue user !
CU
Max

Similar Messages

  • MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

    MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

    Try a SMC reset.
    http://support.apple.com/kb/ht3964
    It might be helpful if you indicated the exact model/year of your MBP.  Are you running Lion OSX?
    Ciao.

  • My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

    My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?

    If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key.  If you Macbook boots to your desktop then you have a faulty cable.  If you get the same error, then your hard drive just died on you.
    good luck.

  • HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

    trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

    The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

  • A505 doesnt start from sleep mode

    My laptop sometimes doesnt start from sleep mode. Everything is flashing but display is black. after reset with power button starting ok.
    Do you have some idea?
    Thanks
    A505-S6033, Windows 7

    I have some problem, but sometime my A505-S6035 when restore from sleep mode LED indicators haven't highlight and brightness of screen is not control by anyway. Can anybody help?
    A505-S6035, Windows 7 Professional

  • Flex datagrid with complex data item - drag doesnt start sometimes

    Hi,
    my project has a datagrid which is rendering complex data item. I need to drag one row from the grid and drop it into the same grid but in a different position.
    I have enabled drag, drop and dragMove.I am able to drag and drop the rows. The problem is that sometimes the drag doesnt start.
    Here are a few scenarios where drag doesnt start
    the first column is not editable. if I start my drag by doing a mouse down on the frist cell of the row, it usually drags an empty row but sometimes it drags the whole row.
    if I have dragged and droped a row in position i(say). Then sometimes the row at position i-1 or i+1 doesnt get dragged no matter how many times i try to do mouse down and drag. However, if I drag some other row (not necessarily drop it elsewhere) and then try this row, it works.
    any pointers would be helpful.
    thanks in advance

    Update on item 4a -
    This was a major issue (the main reason for opening this thread really) and I managed to resolve it!
    As part of my application, I override the default DataGrid behavior for column selection (headerRelease event).
    Instead of sorting, I change the column's header looks and define it as Selected (for showing its dynamic properties and enable its deletion).
    At first I did this by setting styles, but the look didn't refresh unless I created a new instance of the header renderer.
    Later I changed thi behavior to work with states, but I left the new header renderer instance creation commands and those lines created all the mess!
    Conclusion -
    If you define a custom header renderer for your datagrid column and then a custom item renderer, don't create a new instance of your header renderer!
    It would still be nice to get some response for the other issues I raised.
    Thanks and have a nice week.

  • Mac book air doesnt start

    my mac book air doesnt start and press switch gives buzzer sound my model is of 2010

    Are you hearing three beeps?
    When plugged in does the green light come up showing a charged battery?
    If you cannot get to recovery mode and can do nothing ....youll need to make an appt. with Apple for in shop full diagnosis and possible repair.

  • Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?

    Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?

    I did this several times.... not help. If I run win8.1 safe mode the Itunes stars and mentioned that video and sound driver not fit for them. After this I downgrade the driver to Win7---> not helped after this I update driver to latest--> not helped....
    This is the situation right now.

  • My adobe creative cloud doesnt start correctly it appears a white screen in the

    the principal screen and not the list of programs. is the second time of installation of this in my computer because I restore it .  And I have tried to install it many times and sometimes it apears the 206 error.
    my computer has windows 8

    Thanks !
    Date: Sat, 5 Apr 2014 03:48:29 -0700
    From: [email protected]
    To: <Removed by Moderator>
    Subject: Re: my adobe creative cloud doesnt start correctly it appears a white screen in the my adobe creative cloud doesnt start correctly it appears a white screen in the
        Re: my adobe creative cloud doesnt start correctly it appears a white screen in the
        created by Abhijit Kr. in Creative Cloud Download & Install - View the full discussion
    Hi angelogiuseppe9,
    If you are getting blank screen after launching Creative Cloud Desktop app then deleting opm.db should help. Please delete all the contents from this location.
    C:\Users\abhijiku\AppData\Local\Adobe\OOBE
    If you are getting Error 206 while installing then try to change the connection from LAN to Wifi and vice cersa. You can also try disabling your software firewall if any.
    Please let us know if it helps
    Regards,
    Abhijit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6273700#6273700
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: my adobe creative cloud doesnt start correctly it appears a white screen in the
    To unsubscribe from this thread, please visit the message page at Re: my adobe creative cloud doesnt start correctly it appears a white screen in the. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Creative Cloud Download & Install at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

    Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

    Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

  • Itunes doesnt start in Windows 7 64bit pc

    ITunes doesnt start in Windows 7 64bit pc. I have Tried to reinstall again for so many times. Reinstall quick time player so many times. ITunes never starts. However in task manager always there is iTunes process running in the iTunes.exe.*32 name.
    Please help me to fix this issue.
    Thanks,
    Ashunandha

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Jstcpd daemon doesnt start

    Hello,
    we have problems on our sles10.3+oes2sp3 2-node cluster with the jstcpd (daemon?).
    After a reboot of node2 (no software updates) the jstcpd doesnt start anymore. Can someone tell me where the problem might be and what the implications of jstcpd not starting are?
    also, now on this node2, if we migrate our data resource the resource becomes comatose. Any ideas on that?
    thx,
    hugo

    Hi,
    jstcpd is a daemon for NSS. Please also post the question on Storage/NSS forum.
    With regard to the comatose resource, please check /var/opt/novell/log/ncs/resource_name.*.out for clues. I won't be surprised if it's stuck at a "nss" command. Fixing the "jstcpd" problem should make the command go smoothly.
    Regards,
    Changju

  • ITunes doesnt start

    I have an iphone and would like to upgrade to IOS 5.0. So, the old Itunes for whatever reason
    needed to be updated. This failed several times, bonjour couldn't be started, my signature
    was outdated, the Apple Software update didnt want to install it...
    I have tried to do everything that the internet had to offer to get it to work.
    Re-install, install only the parts separately, delete bonjour
    and all the other bloatware with evo uninstaller and then re-install.
    Tried to turn off or on the services over services.msc when it said
    that the **** bonjour spyware cant be turned on. (What do I need this
    for anyway? I need to update the OS of my phone, nothing else)
    I am running XP and now Itunes doesnt start at all.
    I have of course tried to delete sidb, yet it doesnt exist in my folder.
    Neither in my user nor in all users and all folders are visible. I have installed and re-installed.
    Can someone help me? The forums are full with all sorts of complaints revolving
    around Itunes and the nightmares that people have getting it to do at least something.
    Any help is much appreciated, as I have been three evenings on this problem.

    Go to support.microsoft.com/fixit
    In section 2 click on: Install or upgrade software or hardware
    Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
    This link may get you there:  http://support.microsoft.com/mats/Program_Install_and_Uninstall/
    Let it run and then try to download it again

  • My phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help

    my phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help

    These are usually the features of a faulty battery. Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution. If no Coverage, still make Genius reservation and take iPhone to Apple Store for free quick (minutes time) battery diagnostic testing.

  • Hi ihave an imac 2.66 intel core two duo.it stops runninig and crushes after working for an hour and it doesnt starts if it doesnt get  cold

    my imac crushes after running for an hour . it doesnt start unless it gets cool .but it crushes again and again

    I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

Maybe you are looking for

  • Update - 4.3.2 - 4.2.1 ?

    How could i avoid updating to 4.3.2 and update to 4.2.1 -- Currently, i have 4.1, but i want to update to 4.2.1 but, itunes makes you update latest update! Help me - In need!

  • All the attachments both in SRM and R/3 must be saved in IXOS database

    Dear all, I am having the following requirements: We are creating Shopping Cart in SRM with attachments and these attachments are saving in the IXOS database. All these (same attachments) are relpicating to R/3 whenever system generates PR or PO auto

  • System command Correspondence to HTBASIC

    I am creating Labview programs  corresponding to HTBASIC  programs. I cannot find some system level commands such as ABORT 7. Does there exist a correspondence list?

  • Disable the access key.

    hi gurus, pls send me the step by step procedure for disable the access key. regards, anuj

  • LabVIEW 9.0f2

    Installation of LabVIEW 9.0 from the Third Quarter 2009 software was successfull and I was able to run any version of LabVIEW from v7.1 to v8.6.1 and the new 9.0 version.  I installed Fourth Quarter 2009 software and the f2 software and now I can onl