Firefighter IDs Not Populating in GRC 10

We're having an issue getting the firefighter IDs to populate in GRC 10.
We have:
1) Configured the integration scenario 'SUPMG' in GRC system (SPRO - Governance, Risk and Compliance - Common Component Settings - Integration Framework - Maintain Connection Settings)
2) Added 'SAP' connection type, 'CL_GRAC_AD_SUPER_USER_RFC' class/interface under 'Scenario-Connection Type Link' for integration scenario 'SUPMG'
2) Configured the 'Target Connectors' under the 'SUPMG' scenario
3) Verified that the superuser firefighter role 'SAP_GRAC_SPM_FFID' is configured under parameter 4010 (SPRO - Governance, Risk and Compliance - Access Control - Maintain Configuration Settings)
4) Verifed that the superuser firefighter role exists in the target system and that full authorizations have been added and generated for 'S_RFC' authorization object
5) Created a firefighter ID in the target system, setting the user type = 'Service' and assigning the superuser firefighter role to the user ID
6) Executed the 'GRAC_AUTH_SYNC', 'GRAC_REP_OBJ_SYNC', 'GRAC_ROLEREP_USER_SYNC' and 'GRAC_ROLEREP_ROLE_SYNC' for target system
I've read that the 'SAP_GRAC_SPM_FFID' (or custom variation) role needs to exist in both the GRC and target system. It currently exists in the target system but not in the GRC system. Is this step necessary?
Other than that, we can't figure out why the firefighter IDs would not be populating in GRC?!?
Any insight would be appreciated. Thanks!

Hi Parag,
Please check this blog post which gives you clear idea about all the details required for your EAM configuration.
http://scn.sap.com/community/grc/blog/2014/01/16/de-centralized-eam-grc-100
Regards,
Madhu.

Similar Messages

User details are not populating in access request

Hello All,
We have configured GRC 10 with LDAP and we are able to search the users in LDAP tcode(find option) and in the access request. But when i select the user and click on ok in the access request, user information is not populating to user details tab. I have followed the SAP Standard doc and configuration is fine. When i select data source as SAP system, user details are population as expected. But when i use LDAP as data source, i am having the issue. I hope this is an field mapping issue but i tried all different options but no solution i found. Kindly help me with your expert suggestions.
Field mapping is as follows:
LASTNAME
SN
FIRSTNAME
GIVENNAME
USERID
SAMACCOUNTNAME
ROLE_NAME
NAME
MEMBER_OF
MEMBEROF
EMAIL
MAIL
MANAGERID
MANAGER
Regards,
Jai Reddy.

I know the path, but how to check it? is it using metaverse search?
Look at the Runs. Are they succeeding, or failing to connect?
Remove the Bit 17 and try again.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Blocking Firefighter IDs login

Hi Gurus,
The Firefighter IDs are user type Service, is there anyway we can limit the direct login under these IDs other than withholding passwords?
Thanks

Please consult SAP Note 992200 - it describes a user exit that does exactly what you want.
That should also be mentioned in the installation guide, if I'm not mistaken.
Frank.

Pl/sql report not populating output

SQL> CREATE OR REPLACE PROCEDURE GET_RECORDS(v_action IN VARCHAR2) IS
2 v_thing VARCHAR2(10);
3 get_records SYS_REFCURSOR;
4 BEGIN
5   IF (v_action = 'DO THIS') THEN
6   OPEN get_records FOR
7   SELECT 1 FROM dual;
8   ELSE
9   OPEN get_records FOR
10   SELECT 2 FROM dual;
11   END IF;
12
13 LOOP
14   FETCH get_records INTO v_thing;
15   EXIT WHEN get_records%NOTFOUND;
16   /* do things */
17 dbms_output.put_line(v_thing);
18   END LOOP;
19   CLOSE get_records;
20 END;
21 /
Procedure created
SQL> exec get_records ('DO THIS');
1
If I call this procedure it is populating data but , if I register it in oracle apps I am not getting data   can any one help
also I replaced dbms_output.put_line with fnd_file.put_line , still it is not populating data

This seems to be like a SQL*Plus report. Please port this query in SQL*Plus community.

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Data not populating after DS enhancement

HI pros,
i have made Data source enhancement.
i wrote the code in include program.
when '0FI_GL_40'.
CHECK NOT c_t_data[] IS INITIAL.
LOOP AT c_t_data ASSIGNING <fs_data5>.
SELECT SINGLE matnr FROM bseg INTO <fs_data5>-ZZMATNR
                         where BUKRS eq <fs_data5>-BUKRS and
                               BELNR eq <fs_data5>-BELNR and
                               GJAHR eq <fs_data5>-GJAHR and
                               BUZEI eq <fs_data5>-BUZEI.
endloop.
but the data not populating into the report, the Multi provider is real time
krish..

Hi,
Syntax
ASSIGN mem_area TO <fs> casting_spec range_spec.
Effect
This statement assigns the memory area specified using mem_area to the field symbol <fs>. You can assign a data object or a memory area calculated from the address of a data object. After the assignment, the field symbol refers to the assigned memory area and can be used in operand positions. When used in a statement, it behaves like a dereferenced data reference, meaning that the statement works with the content of the memory area.
The data type with which the assgigned memory area is treated, depends on the specifications in casting_spec. You can either execute an explicit casting or the field symbol takes on the data type of the data object specified in the assignment. A field symbol to which a memory area is assigned, has this data type after the assignment and behaves like a data object of this type.
The assigned memory area mem_area must be at least as long as the data type specified in casting_spec and must have the same alignment. If the data type determined in casting_spec is deep, the deep components with their type and position must appear in the assigned memory area exactly like this.
Use the specifications in range_spec to restrict the memory area that can be assigned to the field symbol.
You have to assign it back to internal table to modify the content.
Check in debug mode if you have still doubt.
regards,
Raju

Fields not populated in cube

hi experts,
i have one problem i have sales item,and header dso's which i have loaded the data using flat files.when am trying to load to cube some of the fields of header is not getting populated.when i am loading only header data that time it is showing the data in cube.when i am loading item data also that time some of the fields of header are not populating in cube.i have tried by taking two seperate cubes for header and item and tried to loading data to multiprovider. but same issue came.for ur reference i am providing screen shots of that. this is multi provider screen shot in this u can observe that division ,region and some fields are not populating data. in local sand box i have done this please help me to resolve this issue.
header cube screen shot before loading to multiprovider.
item cube screen shot before loading to multiprovider.
regards
jaswanthi

How are you "loading" to a MultiProvider? A MultiProvider is merely a "view" on 1 or more InfoProviders, nothing gets loaded in it.
The screen shot of your MultiProvider shows data of your items InfoCube only... have you filtered on the InfoProvider field? If not, try and filter on your header InfoCube and see whether it shows any data. If not, then there's something wrong with your mappings in the MultiProvider definition.
It's perfectly normal to have empty fields if you're combining 2 InfoProviders into 1 MultiProvider. If that's not what you want, you should consider an InfoSet (which "joins" data) or model it so that when you're sending item data to a new InfoCube, you "look up" the missing header data in your header data DSO and add it.

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

Line Item Field "Assignment" not populating

I am posting a KR doc. The assignment field in the line item is not populating with the date on the document is being posted in either of the line items, posting key 31 posting to Vendor and posting key 40 posting to an expense G/L account. The assignment field remains empty. I have checked some documents in the other company codes where this field is being populated with the date in the yyyymmdd.
Please let me know what controls this and how can I make this field populate.

Th Sory key for the GL for that company code should have the document date as the sort key.... check in FS00

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

0PM_ORDER - WBS element not populated by extractor

Hi all
Just wondering if anyone has experienced a similar problem.
We use this data source as part of our PM master data loads. It runs every night, no problem. Iu2019m busy with a new user requirement regarding Project (WBS) costs as posted on PM orders, and I was pleased to see that 0PM_ORDER has field PROID (WBS) on it already u2013 thought I was half way to building my query!
Except, the field is not populated. Even when I run the extractor on the R/3 system to test (for an order type PM05 on which WBS element is a required entry), I never get any values in this field. I had a look on SDN and OSS and have seen a number of posts about the conversion exits relating to WBS elements, but this presupposes that a value is being populated in the extractor, which in my case is not happening.
Does anyone have any suggestions?
Regards, Lara

0PM_Order extracts the data of WBS element on the tab "location" on the PM order (IW33). It doesnt extract the WBS element on the tab "Additional data".
I am not sure how these WBS elements are different, your PS consultant might have an answer. Either you can have user exit to fill this field or ask your ECC abap consultant to fill the same in both fields of order, if doesnt make any difference. I am also in same situation, keep me posted if you have have get any new information from your PS consultant or SAP.

S_Tcode not populating in simulation

Hello-
When running a simulation in CC 5.2, and using permission level analysis, you have to manually add s_tcode in the object table.
Steps:
Insert a role, press simulation, add an action, click on the objects button; s_tcode is not populated. When it is not added, it is not causing any conflicts, which is incorrect. In an older version of CC 4.0, before a support pack was installed, this problem was evident. Is it a product-level issue with CC 5.2? If so, how do you work-around it?
This is an urgent issue, since we have to run simulations almost everyday, as we have not implemented Risk Terminator. Thanks!...
Noah
Edited by: Noah Phillip on Feb 26, 2008 7:51 PM

Ibrahim-
Yes, I understand, but not inserting s_tcode in the object manually produces wrong results after executing the simulation. Inserting s_tcode manually produces the correct results.
The same issue was evident in CC 4.0, until SAP produced a patch for it. I am wondering if they overlooked this patch while developing CC 5.2...
Noah

Virtual Characteristic value not populating in the query output

Hi Experts,
I am new to BAPI and I am using this to populate the values of virtual characteristics.
I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
The below is the compute method of my implementation class.
FIELD-SYMBOLS :
<fs_0cs_order> TYPE ANY,
<fs_zww_teco> TYPE ANY,
<fs_status> TYPE ANY.
if p_cha_0cs_order > 0.
ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
endif.
if p_cha_zww_teco > 0.
ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
endif.
Select single /BIC/ZSYSTATUS
    from /BI0/PCS_ORDER into <fs_status>
   where CS_ORDER = <fs_cs_order>.
if <fs_status> CP 'TECO'.
<fs_zww_teco> = 'Y'.
else.
    <fs_zww_teco> = 'N'.
endif.
But I am not sure why the values are not populated. But when i debug , i could see the values for
P_cha_0cs_order = 35
p_cha_zww_teco = 54
But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
Can you please guide where i am missing ...
Thanks
Vamsi
Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

Hi Sushant,
RSRT --> Enter Query Name
Click on Technical Information --> If " Virtual Char./Key Figures " = Y
In my case , even then i clciked generate report,
even after that P_CHA_0CS_ORDER = 35
and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
Can you please guide me .
Thanks
Vamsi

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

Delivery schedule line number in sales order is not populated in production

Hi all,
i am doing make to order scenario with 20 strategy group. In sales order we r defining the different delivery schedule lines.when i run the MRP and getting the plan orders for all the FG material and semifinished material, the sale order number and sale order item number is getting updated in production order . Beside these two , delivery schedule line number is not populated in production order.
please give your valuable suggestion .
i would be highly thankful to u
Will reward points.
Regards
Kumaraguru

Hi Kumar,
Some changes done in your PRD server.If yes then contact abap consultant regarding the same.
Because these type of problem comes when you do transport or changes done in the system.
Regards,
Anil

Firefighter IDs Not Populating in GRC 10

Similar Messages

Maybe you are looking for