Firefox 10.0.2 / Does not offer restore session - Tools/Options lack Startup options choice
After closing Firefox - starting again does not offer a Restore Session option. Tools/Options lacks any choice for startup options.
How do I remedy this problem.
The Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time" setting should still be there.
Can you attach a screenshot of the Tools > Options > General window?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Similar Messages
-
Trying to change ownership of my old iPod. The advice here is to go to "Devices">"Summary">"Restore", but I find "Devices" does not offer "Restore" but only "Sync", "Transfer", "Backup", and a greyed "Restore from backup."
What I don't understand is that your iTunes looks different from mine--just a little bit. You have 3 circles, red, yellow, and green, in the upper right end of the top bar. INstead I have a square that is half gray. When I click it, I get a menu very similar to the menu under "File."
The only place I see an entry for "Devices" is under "File," but it only gives the 4 options I mentioned before (see below). There is no "Summary."
Here's another screen shot after I added an album to music. Now all the choices under "Devices" are grayed. -
My firefox 4 bookmarks menu does not offer :Organize Bookmarks, so where do I find this feature?
My goal was to export my bookmarks menu to a memory chip, so there'd be a backup. i clicked on Bookmarks (firefox 4) and the menu of bookmarked items appeared, but the item Organize Bookmarks was not there. I searched around and eventually found an Organize tab in Library, but there was no clue about how to export the full menu to the memory chip. can you steer me to the appropriate place for starting the export process?
Use "Show all bookmarks" menu. It works same as "Organise bookmarks" menu in previous Firefox versions.
-
I was following article http://support.apple.com/kb/HT2534 -- it instructs me to select 'none' for payment type.
I (my teen) do not have a credit card. I want to download free apps and use gift cards to purchase music.
Any suggestions as to how to set up account without credit card?
Thank you,Did you follow, exactly, the instructions on the HT2534 page when creating the account ? I've just tried it on my Mac's iTunes and the instructions still work e.g. find a free app in the store, click on its free 'price' button, and on the popup click on 'create apple id' - when you get to the payment details screen you should see the 'none' option.
Creating an account with 'none' : http://support.apple.com/kb/HT2534 -
when trying to update apps i keep getting billing method incorrect(this is on iphone 4s) i hsve tried this store,apple id,view id,payment info but does not offer me the none option,i can npt update my phone any ideas anybody please?
If you dont have none option then you must own itunes some money. So you have to enter the payment like a itunes giftcard. you can contact itunes by email by going to expresslane.apple.com
-
I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.
Read through this link and maybe you'll see something that will help you:
http://www.tech-recipes.com/rx/5827/ipad-3g-activating-purchasing-att-cellular-d ata-for-the-ipad-3gwifi/ -
I am trying to open my iTune 10.4 on my mac mini which is running OS 10.6.8, and I get the message that I need to use the information pane to open in 32-bit rather than 64. But the information pane does not offer this option. I'm in a vicious circle of opening, getting this message, then having to close. Did this come about after the June update of iTunes? And if so, why haven't they fixed it? And what can I do? You'd think Apple would want be to be able to spend my money in their store ...
Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR. -
I have created a lengthy slideshow with music on my MacBook Pro under Iphoto. What steps do I need to take in order to burn a DVD copy of this slideshow? "Help" does not offer info for this transaction, only if you want to export to another Apple device and it shows that you must first export to Itunes. Can anyone help me with information on just copying to a DVD? I don't want to email it or show it on another Apple device. I want to be able to burn multiple copies on DVDs as a gift...... Can it be done? I'm not real computer savvy
Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start. -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
FireFox 4.0.1 does not support HP Simplepass Identity finger print scanner?
The previous version of Firefox would work with my HP Simple pass (finger print scanner built into the laptop) to be used as a password for all web sites that require a password. Firefox 4.0.1 does not know what to do when I scan my finger print on a login page. Can I remove Version 4 and go back to the old version that worked?
Please do not mind my first error, the one about the Finger print Scanner. \
But please help me with the USB problem. -
Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me:: -
My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]] -
Can I get an older release of Firefox? 36.0 does not play well with Windows 7.
Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
Can I find older versions anywhere?You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
[https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/ -
Lync 2010 client does not offer any NON-direct UDP Candidates in its SIP Invite' SDP - why?
Hello.
We have a customer, experiencing the following issue.
They have big multi-continental Lync Server 2010 Enterprise Edition deployment, with non-NAT'ted Edge Pool.
The call scenario is simple: peer-to-peer video (A/V) call between external Lync client and Video system, Cisco VCS
in this case but does not matter, which (video system) only supports media over UDP (which is nothing strange). The VCS has a lot of video endpoints all over the Globe, Lync clients are also everywhere, so call can be any "distance", not predictable.
All video endpoints are registered on this single VCS.
The video call, as I suspect, only succeeds IF direct peer-to-peer UDP connection works and fails otherwise.
I skip the overall design, keeping here only what is relevant.
Video system offers only its own local IP as UDP candidate (type = host), which in this particular
case is expected, let's assume there is no TURN etc expected on video system' side, it is directly Internet-facing.
Now the main bit. Lync client offers ALL proper TCP candidates: both local AND non-local, using external
public IP addresses of both A/V Edge Hardware LoadBalancer VIP and public IP address of one of Edge servers.
Those candidates are enlisted perfectly fine (I checked carefully), so SIP INVITE has them all offered.
Now: the Lync 2010 client ONLY offers direct/local UDP candidate (type = host) with its own IP address,
but does NOT offer any NON-local UDP Candidates at all (while, again, for TCP candidates the full set of non-local (A/V Edge) ones is offered).
WHY this can happen?
Again my guess on where to dig is: TCP candidates (which are completely useless for such video call)
are all offered fine with A/V Edge's public IPs, both VIP and particular node ones. Does this fact make sense?
WHAT can be the reason why the same or similar remote/Edge Candidates are not being
offered/enlisted for UDP while for TCP they are offered?
What I already found, to be excluded easily: the whole client sign-in and in-band provisioning is OK, all about
certificates is Ok, and all about MRAS URI and MRAS Credentials (looking sign-in traces) is also fine. Client gets proper MRAS username/password and ALL about signaling before SDP is also fine (no TLS or MRAS related errors).
I cannot rule-out potential DNS issues at the moment, however unlikely: otherwise how it would get proper list
of NON-local TCP candidates and all SIP signalling with the Edge working Ok if it would be DNS-specific issue?
What, however, I have not confirmed is: UDP port 3478 is most likely NOT opened on/between all of the involved parties (Edge's private and public interfaces, Hardware LoadBalancer's interfaces and client),
and/or UDP 3478 communication is most likely getting blocked completely (when the client is external), however for instance TCP 443 is everywhere opened.
Can THIS be somehow related to why it properly allocates non-local TCP but none of
non-local UDP Candidates?
What traces show on call negotiation is ICE Connectivity Failed and/or ICE Warning - I have real it carefully, did WireShark'ing, what I suspect is: simply ICE Connectivity Checks fails on direct P2P UDP which is of course expected, and because no non-local
UDP candidates are offered and TCP is not allowed on video system' side - it fails. WireShark shows the following: millions of outgoing UDP from the client to Cisco VCS and not even one INcoming UDP back from VCS.
Sometimes, depending on the external client's location, call, however, succeeds. I guess (guess)
this is because SOMETIMES direct UDP flows Ok, while in vast majority of the cases it expectedly does not.
Big thanks.
/roubchiHi,
VideoendpointsonlysupportUDPmedia.ICEusuallyoffers3candidates: Host(privateIP), ServerReflexive(outsideIPaddressoffirewalllocaltothemediasupplyingagent–B2BUAorLyncClient),
TURNserver(typicallytheEdgeServer/VCSExpressway)
You can refer to the link of “Cisco
VCS and Microsoft Lync Deployment Guide (X8.1)” to check the configuration of Lync integrated with Cisco VCS.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I am trying to update to ios5 via software updates but the general tab does not offer it. I am using an ipad2. Help!
Here you go:
iOS 4: Updating your device to iOS 5 or later
Summary: Connect your iPad to a computer running the latest version of iTunes and your update options will appear.
Maybe you are looking for
-
IMac cannot handle Mavericks and external display?
I am a long-time apple-user and long-time user of this wonderful forum. This is, however, the first time I have needed to ask a question of my own having been unable to find an answer on here or elsewhere. In fact, I haven't read of anyone experienci
-
Late 2007 Macbook Pro 802.11n slow transmit rate
I have a Netgear Rangemax N router. But when I connect to the network and option+click on the wifi, my PHY Mode says "802.11n" but my transmit rate is only 54. When my Macbook air connects to the same router, the PHY Mode is still 802.11n, but my tra
-
I have nokia N85. It's internal memory iz ~70Mb and SD Card 8GB. When i try to receive any file by bluetooth connection from other phone, whitch size iz larger than 70Mb ... phone can't receive it. Is it possible to make phone saving files to SD Card
-
Hi Guys, As you are aware In RWB under Component monitoring, there is an option for testing by posting messages directly to XI Pipe line. I have a requirement, where by i need to disable this feature in our production environment and still retaining
-
Split table record into several lines - pdf forms
hello experts im trying to split a table record into several lines in order to present the whole table record in the form. for example: table T has 4 fields F1 F2 F3 F4 if the tables has 2 records - R1 and R2 (every record contains 4 data fields) the