Firefox 13.0.1 will not start up in Windows 7 Home Premium.

Reinstalling did not help, it doesnt create a window or a windows process in task manager. When i start it up, next to the pointer comes a loading circle but that stops and nothing happens.

The Run as Administrator checkbox was empty and it didn't work. I checked it on and now firefox works. Resetting wouldn't help anything cause it's a clean install that won't start up...
So starting up as administrator makes it work again...

Similar Messages

Wi-fi touch mouse x7000 will not stay paired on Windows 7 home premium 64-bit

Product: HP wi-fi touch mouse x7000
Computer: HP Envy sleekbook/ultrabook 6t 1000
O/S: Windows 7 Home Premium 64-bit
Wifi type: Intel 802.11b/g/n WLAN and Bluetooth + WIDI
Error message: none when attempting to pair
I received my HP Envy 6t two days ago and have started the process of loading software and devices. In addition to ordering the PC from hp.com, I also ordered the HP Wi-fi touch mouse x7000. After booting up the PC for the first time and walking through the Windows 7 set-up, I immediately installed the wi-fi mouse.
Upon initial install of the mouse with the provided install CD, I received an error message stating that one of the drivers was not digitally signed and that the version of windows installed did not support unsigned drivers and that the installed device may not work because the driver would not be used. I continued forward with the install and the mouse seemed to be in working order. I then decided to go out to the HP support website and download the latest Windows 7 64-bit driver for the mouse I had. I then ran through the install and the mouse still continued to work. At this point I had not yet rebooted the PC.
I then performed the following steps in the listed order:
- Installed HP Photosmart 4700 series printer with provided install CD and established a connection via wi-fi
- Installed MS Office 2010 SP1
- Started download of automatically identified Windows Updates that were related to the O/S and other installed Microsoft software
- In parallel with the Windows updates download, I installed the latest release of Symantec's Anti-Virus software and updated its software and virus definitions, this all finished prior to the Windows Updates being completely downloaded. I left the default settings as is for the Symantec Anti-Virus configuration.
- The Windows Updates then installed
- Rebooted the PC
After the reboot of the PC was completed, the mouse would not pair at all. I attempted several times where I would go into the HP mouse control and select configuration and then pairing. I would follow the instructions of pressing the connect button and the screen would then say it paired, but the O/S would not recognize it and the mouse would not move. Going back into the mouse control center it then also recognized it was not paired.
I then attempted to uninstall the mouse software and it would get to the point where it was "gathering information" and it showed a full status bar yet it just hung there. I would wait for 15 minutes and then hit cancel and it would still just hang there yet again. After 15 additional minutes of canceling I would just reboot the PC for which the mouse software was still installed but the mouse continued not to pair. I tried the uninstall process 3 times, each with a PC reboot as part of the process because it would just hang.
I am not sure if the install CD installs a 32-bit version of the mouse software and drivers. If so, perhaps I confused the registration of the product by installing the 64-bit driver I downloaded from HP support. I have attempted to install both the 64-bit driver and the 32-bit driver for Windows 7 that I downloaded from HP Support online in which the execution of the installation is successful with no errors. However the pairing continues not to work and the uninstall hangs.
In addition, after the PC bounce, my HP printer was no longer being recognized. Come to find out Symantec is blocking communication of the PC to the router and thus to the printer. So I disbled Symantec and the printer now works but the mouse still does not. I even rebooted the PC after disabling Symantec and attempted to pair, with Symantec still disabled after reboot, then attempted mouse driver re-installs, mouse software uninstalls and still no luck.
So I am at the point where I cannot uninstall the mouse via conventional means and the wi-fi mouse will not pair manually or automatically.
I have not yet circled back to performing another Winows Update check to see if there are any additional updates after the intial download of the ones mentioned earlier. I will plan to do that next time I am on the PC.
Any suggestions?

moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Editor in elements 8 will not open. using windows 7 home premium. can this be fixed

editor in elements 8 will not open. computer has windows 7 home premium. steve

You may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or hold down the keys whilst double clicking on PhotoshopElementsEditor.exe
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Then wait whilst Elements rebuilds the preferences.

Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older ver

Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
== This happened ==
Every time Firefox opened
== either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to default

I had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

Adobe Acrobat 9 Pro will not load on new Windows 7 Home Ultimate PC

When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?" I click Yes and it begins to process again for a few minutes. Then it displays the following Invalid Unicode file error message...and simply stops processing or installing. In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
Thanks for your interest in helping!
b
Bob Horton, MS
972-786-6445
[email protected]
www.rshorton.com

Not matter what I do, Firefox 3.6 still will not start

I've tried many things, ending the process (firefox.exe), uninstalling and reinstalling, restarting my computer, and nothing has worked, Firefox still won't even start up. It doesn't even show anything. Any help would be greatly appreciated.
== This happened ==
A few times a week
== I tried to open Firefox ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

Have you read all the solutions in [[Firefox will not start]]

ITunes will not start on my windows 7 computer

iTunes will not open on windows 7, help!
I have an HP laptop running Windows 7 Home Premium, the iTunes version is 11.1.5.5. About a year ago my screen broke on my HP laptop so I moved the hard drive into an older computer. I recently moved my hard drive from the old laptop back to the new. least opened on the older laptop but now it will not open at all. I've searched all around the web and still haven't found an answer. It's becoming very aggravating. Other programs
I uninstalled every apple related program and reinstalled them, I deleted old apple files, scanned for malware, drivers, Nothing seems to work i'd greatly appreciate the help.
iTunes at least opened on the older laptop but it would stay stuck at analyzing gapless playback, now it will not open at all. I've searched around the web and still haven't found an answer, it's becoming very aggravating.Programs stop working as well such as Catalyst control center, I had to get a new sound driver, Firefox wasn't working, Movie maker, and vlc video player.
I uninstalled every apple related program and reinstalled multiple times, I deleted old apple files, scanned for malware, drivers, disk defragmenting. Nothing seems to work I'd greatly appreciate the help because my iphone died two nights ago and when i plugged it in to charge it would show the battery, then spple logo almost immediatly, then the passcode and it would die and do it again, basically stuck in an endless reboot. Now it's current;y stuck in recovery mode and I want to restore it but of course iTunes isn't working, life is hard so please give me a hand apple I like apple I don't wanna get an android haha.

About a year ago my screen broke on my HP laptop so I moved the hard drive into an older computer. I recently moved my hard drive from the old laptop back to the new. least opened on the older laptop but now it will not open at all.
Doublechecking before proceeding. Are you getting an error message on the new laptop when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Lync 2010 Cleint will not start on one Windows XP Client

We have on Windows XP (SP3) Client and on this Client lync 2010 with the actaul CU6 will not start.
No entry in the eventlog or any other errors.
Deinstall, restart, install, restart does not help.
Has anyone had the same issue on one Windows Xp client?
regards Holger Technical Specialist UC

Hi
Can you login with a different account and test it? exit the lync client:
Also go to the %userprofile%\AppData\Local\Microsoft\Communicator folder (this is for windows 7 but you get where i am going) and remove the contents (sip) folder and then try login again.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

I can't uninstall Firefox(3.6.3) either through the control panel or by going to Program files/Mozilla Firefox/Uninstall and running the helper.exe, I have Windows 7 Home Premium(64bit)

I simply want to uninstall Mozilla FireFox 3.6.3. I tried both recommendations of using the control panel to add/remove program and running the helper.exe in Program Files/Mozilla FireFox/uninstall. I am running Windows 7 Home Premium Edition(64bit). When I tried to remove it using the add/remove program and helper.exe all it does is start for a split second(mouse pointer turns into circular loading icon) and then it stops.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hi Guys,
I had this same problem too, and i want to share to all of you my own fix for this kind of problem;
(READ FIRST: ''This step will wipeout everything that mozilla saved on your computer including : password, history and bookmarks''.)'''
'''1. download the Revo Uninstaller''''''
- quick step guide for this:
select mozilla firefox, don't forget to uninstall everything that relates to mozilla including registry to clean them all up.
'''2. download mozilla firefox again'''
- AND REINSTALL. however on this stage, in some cases mozilla will not open at this stage.
'''3. Uninstall Mozilla firefox again NOW using control panel.'''
'''4. Restart the computer to refresh everything.'''
'''5. Reinstall mozilla firefox again, once you have received the prompt for "exporting or importing etc.. etc.. from Microsoft" that means its already working.. it will take around 5-10 sec to load up (in my case) .'''

Will the S10-2 support Windows 7 Home Premium?

My wife has an S10-2 Model 29577NU.
She's quite sick of the limitations of Windows 7 Starter, I figure $80 for the upgradetoHome Premium is well worth it but I can not find any information on if this is even possible.
Can anyone point me to some solid data on weather this unit can handle Windows 7 Home Premium?

Hi and welcome, all version of Windows 7 are supported... you found Windows Driver for all machines here.
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Will Lightroom 3 run under Windows 7 Home Premium?

I'm about to upgrade my OS to Windows 7 Home Premium and wonder if Lightroom 3 will run under this OS? The Release Notes identify "Home Premium" as a suitable version of Vista, but don't make any mention of the "flavours" within Windows 7 - just "Windows 7". I don't want to upgrade to an OS that won't support Lightroom 3.

People have reported online that they have had no issues with the LR3 on Win 7 Home Premium.
http://www.dpreview.com/forums/thread/3143875

HP Compaq d530 SFF not recognizing DIMMs. Windows Vista Home Premium 32bit - BIOS version 02.44

Hello HP community!
I recently received a HP Compaq d530 SFF, from the company, where I had my work experience.
I gladly took their offer and took the PC home, all was going well until I bought myself some new DIMMs, from ebuyer.com.
I new for a fact, the computer needs DDR 333MHz, PC2700 and it had to be in DIMM format, so I went and bought 3x1GB modules. A few days later they arrived and I inserted them into the computer, making sure that two DIMMs were in the blue slots, and the others (I wanted to keep a 256MB module in) in the black slots.
I re-inserted the power cable and tried to boot the PC, it showed me a BIOS message, showing the amount of memory had changed, since the last boot. Once the configuration showed up, it only recognized the 256MB module. I then powered down the computer, to then remove the 256MB module, to see what would happen. I then rebooted the PC and it gave me an error tone (No picture). To which I then (rotatingly) tried each different DIMM, to see if one of them was defect. They all gave me the same error tone. Since then, I have been running Windows Vista Home Premium, with 1GB (4x256MB DIMM).
Does anyone maybe have a suggestion, how to solve this problem?
I have already updated the BIOS version to 02.44 (Latest I could find).
Thanks in advance!
Yours sincerely Simon Cahill
This question was solved.
View Solution.

Beatsleigher,
Not all memory is the same, even when picking PC2700. Did you purchase non-ECC?
Here is a guide on memory config for the D530SSF
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Firefox 13.0.1 will not start up in Windows 7 Home Premium.

Similar Messages

Maybe you are looking for