Firefox 14.0.1 has a spell checking error./ bug in the code

I just had all my machines update to 14.0.1 (WIN XP SP3)
I had a clean boot right before the update occurred.
This is the first time I had used this version on this machine.
When the program came up, I had no access to the spell checker at all. Nothing I did could change this (checking and un-checking the feature in the right click menu.
So, I selected the option of restarting the browser in "SAFE MODE" with no add-ons. There was no change at all (still no spell checking)
So, I went to this site, made an account, activated the count (this entire time FIREFOX had no spell checking) and I created a report.
I was most of the way done writing the report when suddenly the spell checking started to work. I made no changes to the settings, when suddenly I had spell checking working.
This means there is an intermittent error;p often the hardest to find from my 20+ years of programming experience (Senior IT contractor)..
So, have find finding this one. Intermittent bugs are the hardest to track, and tend to come from issues like scope issues, settings stored in files/registry, overly convoluted code (like a rush job that isn't fully understood & was just hammered on until it seemed to work). From my experience it often happens in the last steps of finishing a release - accidentally introducing a bug into what was a working section of code (unexpected ramification are a suspect) into a previously working program piece of a program.

Hi BarleySinger and thanks for reporting us this issue.
Yes. Intermitent bugs are really difficult to track and solve, so please try to do this things:
* Try to reset Firefox so all settings that may be creating this problems will be removed.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
* Try to perform a antivirus scan on your computer so you check you have no malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try some of the following programs to scan for malware:
* [http://www.malwarebytes.org/mbam.php MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://windows.microsoft.com/MSE Microsoft Security Essentials] (A good permanent anti-virus if you don't already have one)
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!
* Send us troubleshooting information.
In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy all to clipboard''. Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Using the Troubleshooting Information page]].
Thanks in advance for your help!
* Check the issue is still reproducing intermitently, and it was not an isolated problem (Maybe Firefox was still preparing the spell checker).

Similar Messages

  • System-wide Spell Checker Error

    I newly installed Leopard on a MacBook Pro, and now in Mail, Safari and iTunes, I get a "Couldn't contact Spell Checker" error message when I try to type in these programs. The problem disappears in Mail if I set Spell Check to never in the preferences. Safari & iTunes don't have that option, that I could see.
    But that's besides the point. Spell check should be seamless and automatic. The error doesn't just occur once. It basically hangs the program because the error cycles continuously and I have to force-quit to get out of the application.
    So now I am using Firefox to type this because Safari wouldn't let me type without letting me know it can't contact spell checker.
    To remedy the situation, I've verified and repaired permissions, although I did not see any permissions that related to this issue. I downloaded and re-installed the 10.5.1 update. No effect. I've spotlighted 'spell checker' and only gotten the .dll file from Windows as a return.
    Guesses, anyone?

    etresoft, thanks for the hint. I looked and found tons of stuff, but not a thing to do with the spell checker error. I did log into another profile on the affected machine and had no trouble whatsoever. Does that mean the problem is in my home/library? I think, hopefully logically, that there's another program causing this issue. What would be the logical way to approach this?

  • Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

    Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.

    Inspector > Text > More > Language
    Only applies to selected text, like making it a particular font.
    It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
    Peter

  • How do you turn on spell check in safari on the ipad3

    How do you turn on spell check in safari on the ipad3

    The ability to auto correct and spell check is set in
    Settings > General > keyboard > Autocorrect
    Settings > General > keyboard > spellcheck

  • Has anyone one else had problems redeeming the code for the free onetime download of Star Trek 2009 Movie?

    Has anyone one else had problems redeeming the code for the free onetime download of the Star Trek 2009 Movie?

    dawnfromcabot wrote:
    ITUNES HAS CHARGED MY DEBIT CARD $99.99 FOR GLOBAL WAR RIOT-SOME GAME I DID NOT KNOW WAS LOADED ON MY OTHER PHONE; HOWEVER, WHEN I PULLED UP THIS APP TO SEE EXACTLY WHAT IT WAS WAS I SURPRISED TO SEE I COULD DOWNLOAD IT FOR 'FREE'. I HAVE CONTACTED ITUNES THROUGH THIS REDICULOUSLY CHICKEN SH_T SYSTEM THEY USE SO THEY DO NOT ACTUALLY HAVE TO HEAR HOW UPSET A PERSON IS NOW THAT THEY CANNOT BUY FOOD FOR THEIR CHILDREN BECAUSE OF A MISTAKE MADE ON ITUNES PART.  I DID RECEIVE AN EMAILED RESPONSE FROM STEPHANIE WHO ADVISED THIS WAS PUCHARED ON A PHONE THAT HAS PURCHASED DOWNLOADS IN THE PAST. I WONDER IF SHE THOUGHT TO LOOK AT MY ENTIRE DOWNLOAD HISTORY AND DISCOVER THAT NOTHING HAS EVER BEEN PURCHASED ON MY ITUNE ACCOUNT IN THE AMOUNT REMOTELY CLOSE TO WHAT THEY ARE CHARGING ME NOW.  THAT IS BECAUSE I DO TRY TO MONITOR THIS ACCOUNT AND OBVIOUSLY THIS LAST PURCHASE WAS DONE WITHOUT MY KNOWLEDGE UNTIL I CHECKED MY ONLINE BANKING ACCOUNT, WHICH I DO EVERY DAY.  TO MAKE MATTERS WORSE THE APP STATES IT IS FREE TO INSTALL WHEN YOU PULL IT UP SO NO ONE HAS CLARIFIED TO MY WHERE THE $99.99 COMES INTO PLAY.  I WILL NOT DROP THIS UNTIL MY BACK ACCOUNT HAS BEEN PROPERERLY CREDITED IN THE SAME TIME FRAME IT TOOK YOU TO TAKE MY MONEY. I WILL LAUNCH A COMPLAINT WITH EVERY POSSIBLE ENTITY IN THE ITUNES COMPANY AND BUSINESSES OUTSIDE THAT REGULATE THEIR BUSINESS UNTIL THIS HAS RESOLVED IN MY FAVOR AS I AM THE ONE WHO HAS BEEN VICTIMIZED BY A COMPANY I INVITED INTO MY TELEPHONE NETWORK IN GOOD FAITH!!!!!!!!!!!!
    Reading that is giving me a headache, how about normal type.

  • How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error

    How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
    Aditya Mediratta

    Hi,
    Please try the steps mentioned below and check if it helps:
    Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
    Right click on outlook.exe and click on Properties and then click on
    Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
    Note: If you are using 64 bit computer then the file location of the file will be
    Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
    Similar thread:
    https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
    Best Regards.

  • TS1292 I put the code in correctly but it says, "The Gift certificate or prepaid code has not been properly activated." or "The code you have entered has not been recognized as valid." Help ?

    I put the code in correctly but it says, "The Gift certificate or prepaid code has not been properly activated." or "The code you have entered has not been recognized as valid." Help ?

    You will need to contact the iTunes Store.

  • Auto check spell check error

    I have a bad habit of typing THE as TEH, usually the auto spell check pick this up. Recently the auto spell check doesn't pick up the TEH spelling mistakes. This applies to all text programs, none of them detect this specific spelling error.
    Any ideas how to reset the Auto Spell checker would be of great help.
    Sincerely,
    Steven

    Thank you for your kind reply. No I am the only user of this system.
    Auto correct spelling works in this forum, but there are no suggestions when right clicking on a misspelt word. The key issue seems to be worse with Facebook. I switched on spelling like you suggested previously, but recently it doesn't work even though the settings when I right click show that it is on.
    I have also had issues with Safari as I did a trial of MacKeeper and this has caused some sites not to load in Safari - the only way around that was to use a proxy server.
    Thank you for all your great help

  • Spell Check error

    I have been having a problem with e-mail -- that has since migrated to Safari as well. When sending a message or trying to enter a password and using a special character or carriage return I get an "Alert" that the "Spell Checker" can't be found (approx.) and the system essentially locks up.
    A search of the discussion groups attributed this to "Spell Catcher" and had a number of solutions that involved reinstalling the system.
    I used Spring Cleaning 10.0 to uninstall Spell Catcher and all linked files (extensions, etc.) and the problem appears to have been resolved.
    This is a much simpler solution.
    I am entering this here because the original discussion has been closed and no further posts were allowed over there.

    I am posting this as a service to others who may run into the same problem.

  • GW8 Spell checker error

    A user is getting the error 'Cannot load spell checker resource module' when spell checking an email before sending it. We have uninstalled, ran cleaner, reinstalled GW but it is still giving the error. We are running GW8 SP2. It has been working for over an year and this suddenly happened. I ran an utility I was pointed to at www.dependencywalker.com. I have the results if needed. What can I do to fix this??

    Hi,
    Hate to say it, but.... user profile corruption somewhere. I suggest recreating the user profile. If it doesn't follow the user it is PC related.
    Let us know how it goes.
    Cheers,

  • Spell Checker Error

    Hi Experts,
    From BSP the standard Spell Checker FM
    ' LXE_SP_CHECKSPELLING_MS' was called.
    while executing this the following error has thrown "Exception condition "NO_ACTIVEX" raised." 
    Can anyone say that how to overcome this...
    Regards,
    Anita. B

    Hi Raj,
    Thank you for your reply.
    In this link they providing the add-ins / new installer which will used in IE. But we cant said to the users to install this add-ins to their each machine.
    So is there any option to check the spelling in SAP R/3 without adding any add-ins or new patches.
    Could u plz reply...
    Regards,
    Anita. B

  • Spell Check not working with the preset dictionary

    My CS 6 InDesign on Mac does not make the spell check with the german dictionary and shows every word as unknown or wrong.
    In Indesign Version 5.5 and 4 i don't have the problem. What can i do to solve this problem. There seems to be no dictionary in german for cs6 or it has no content.
    Thanks for your help.
    Chris-Henning

    Don't know if this helps
    http://blogs.adobe.com/vikrant/2012/05/indesign-cs6-hunspell-dictionaries/
    http://books.google.ie/books?id=wdOUIDlqqkUC&pg=PA83&lpg=PA83&dq=indesign+german+dictionar y&source=bl&ots=1fRCN3f1Mg&sig=_fzDc4wGvtub-syeHC2Z85rNHQE&hl=en&sa=X&ei=7rF3Us2YLpO0hAeUo YCIDQ&ved=0CGQQ6AEwBQ#v=onepage&q=indesign%20german%20dictionary&f=false

  • CS6 Spell check error: The operation cannot complete because of an unknown error [CANT]

    Hi Everyone,
    Has anyone else encountered this error when trying to spell check? Is there a way around it?

    Hey,
    I had the same problem any time I tried to open .svg files. I resaved the files as .eps and they opened without issue.

  • Spell checker does not recognise the language I'm using

    Hi, I have enabled the spell checker with a couple of dictionaries installed.
    I use both languages on a regular basis.
    Is there a way to let the spell checker guess which language I am using automatically?
    currently every time I switch to another language I have to manually select the language from the list, which is quite annoying..
    thanks
    Michael

    The Dictionary Switcher extension should be able to do what you want - https://addons.mozilla.org/firefox/addon/dictionary-switcher

  • Spell check error: Inteligent s/b Intelligent

    In what has to be one of the great oxymoron's of all time my spell check does not read inteligent as spelled incorrectly. It should be intelligent.
    While I did not intentionally change anything, I need to know if there is a way of getting into the spell check and removing the word as being accepted as correct.
    I went to the help web site and it said the following :
    +If you accidentally add a misspelled word to the dictionary, type the misspelling in the Spelling and Grammar window and click Ignore, or Control-click the misspelling and choose Unlearn Spelling from the shortcut menu.+
    I opened a new mail and typed the word in and highlighted it.
    (1) The ignore tab is grayed out, that does not apply.
    (2) There is no Unlearn Spelling from the shortcut menu when you control click.
    Do the two suggestions only apply if I accidentally hit the add (LEARN) button.
    Any other suggestions or am I doing something incorrectly.
    Thanks,
    Greg

    greg1424 wrote:
    +If you accidentally add a misspelled word to the dictionary, type the misspelling in the Spelling and Grammar window and click Ignore, or Control-click the misspelling and choose Unlearn Spelling from the shortcut menu.+
    I opened a new mail and typed the word in and highlighted it.
    (1) The ignore tab is grayed out, that does not apply.
    (2) There is no Unlearn Spelling from the shortcut menu when you control click.
    Do the two suggestions only apply if I accidentally hit the add (LEARN) button?
    Hi Greg,
    I think the answer to your question is clear from the material quoted from the Help website:
    "If you accidentally add a misspelled word to the dictionary...choose Unlearn Spelling from the shortcut menu."
    Only something that has been "learned" can be "unlearned."
    Regards,
    Barry

Maybe you are looking for