Firefox 17.0.1 windows 7 64-bit, not focused during start

Hello sir,
I recently installed the firefox latest version (This is not an upgrade) on my new laptop running windows 7 premium, 64-bit.
When I start the firefox, it's loosing the focus and I need to click somewhere in the firefox to make it focus.
When I start the firefox in safemode, everything is working great. As understood from other questions, this seems to be the problems with the add-ons I installed. So, to investigate it, I disabled all the plugins and extensions, but no luck. Firefox is starting and but it's not focused.
The issue is reported by my friend too, who is running the same configuration.
This unfocused window is very annoying, please help us to resolve it.
You help will be highly appreciated.

hello rpg.jhansi, please try this: go to firefox > help > troubleshooting information and click on profile folder/show folder. a windows explorer window should open up - in there delete the file named '''localstore.rdf''' & restart firefox afterwards. (this will reset the customizations to appearance & windows dimensions in firefox)

Similar Messages

Firefox 5 on my Windows 7 64 bit laptop locks up. Have not be able to get on the internet for days.

I have used Firefox for 3 years on all my computers. However, Firefox 5 on my Windows 7 64-bit laptop locks up. I want to uninstall it and use an earlier version. Also, the "key' in the address bar to 'remember the password' for this site will NOT behave! No matter what I do, it continues to crop up. I dislike Firefox 5 because it is causing me delays, using up my time with constant problems. What previous version do you recommend I use?

You can find the Import menu entry in the Bookmarks Manager (Library)
*Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
*Bookmarks > Show All Bookmarks > Import & Backup > Import HTML : "From File"
*http://kb.mozillazine.org/Import_bookmarks

Firefox 35.0.1 Windows 7 64 bit Adobe Acrobat 10 and Nitro 9.5 Plugins do NOT work Error 404

Firefox 35.0.1
Windows 7 64 bit
Have Adobe Acrobat 10.1.13 and Nitro 9.5.2.29.
Have read all your articles about settings up the plugins but neither will work with Firefox.
IE11 had no problem.
Why do you make your software so heard to work with and so hard to get support?

Do I understand this correctly. If you use the named plugins sites give a 404 error but with the plugins the sites do not ?
* Is that correct ?
* Are you able to provide some sample sites addresses that are public and demonstrate this problem ?

Is Firefox Beta compatible wigth windows 7, 64 bits?

Is New Firefox Beta compatible wigth windows 7, 64 bits?

The normal firefox browsers are all 32 bit. They will however run on 64 bit systems. I have not been following the 64 but scene, but I think there may be 64 bit builds for Linux distros, but I am not sure there is anything official for Windows yet.

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

I am going "Insane" - On windows 7 64 bit Itunes just stopped starting, it tries but gives up after a few mins - I have tried every reinstall-restart-that I can find in any forum, it still will not start up HELP

Hi, ATPMolloy.
I certainly understand your frustration and will do my best to help. I see you have uninstalled and reinstalled iTunes with no change in results. I have attached an article below that specifically troubleshoots this issue that you are experiencing.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
Jason H.

Windows 8 64-bit not working on iTunes

Every time I try to update my iTunes it fully downloads but when I try to install it says that its not compatible with my computer. I have Windows 8 64-bit and I download the 64-bit Windows version. Does anybody know why it doesn't work?

You might try a manual install/repair.
The instructions below I've done with Windows 7 64 bit. (not sure what will happen with Windows 8 but we may learn more)
After downloading the latest version of iTunes from Apple, extract the files in “iTunes64Setup.exe”
(If you have never done this, you may need to download a program such as WinRAR [64 bit].)
Manually run each install file in the following order.
AppleApplicationSupport.msi
Bonjour64.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
iTunes64.msi
If there are any errors, stop, and write back with the results.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Home Sharing Windows 8 64 Bit - Not working

Home Sharing on itune 11.0.2 stopped working. I enabled Home Sharing and I don't see shared Folder on iTunes.
Os : Windows 8 64-bit
ANy thoughts.
TIA

You might try a manual install/repair.
The instructions below I've done with Windows 7 64 bit. (not sure what will happen with Windows 8 but we may learn more)
After downloading the latest version of iTunes from Apple, extract the files in “iTunes64Setup.exe”
(If you have never done this, you may need to download a program such as WinRAR [64 bit].)
Manually run each install file in the following order.
AppleApplicationSupport.msi
Bonjour64.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
iTunes64.msi
If there are any errors, stop, and write back with the results.

Firefox 6 running under Windows 7 64-bit does not render fonts correctly.

The default sans-serif font for Firefox is Arial. Running Firefox 6 under Windows 7 32-bit, the font renders properly, but under 64-bit Win7, the font is too heavy, and bold or strong makes no difference. I run Win7 64-bit on a laptop computer and use Firefox 5 on it, and the fonts render properly. Possibly a Firefox 6/64-bit problem?

Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

I am running firefox 19.0 on Windows 7 64 bit. 3 times in the last 2 weeks i cannot open firefox. I have to uninstall it and reinstall each time.

I have run firefox for a couple of years on windows7 64 bit. Just bought a new lap top - still window 7 64 bit. Rep[repeatedly, firefox stops working (i can't open it). I uninstall and reinstall. I did that yesterday. It worked for about 24 hours - then I had to do it again.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

I am using firefox 11.0 in windows 7(64 bit) but firefox for windows xp is loading on my computer.

Firefox 11.0 was working on this computer (windows 7 64 bit) but went into window xp mode.

Try to delete printer in Control Panel and re-add:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Is firefox 8 compatable with windows 7 64 bit?

I am upgrading my computer and it will have windows 7 64 bit installed. Can I use Firefox 8 or do I have to use a 64 bit version?

As you can see, <a href="http://www.favbrowser.com/firefox-32-bit-x86-vs-firefox-64-bit-x64/">this page</a>64 bit builds indeed has an advantage against 32 bit builds.
In case you would like to download older Firefox 3.1 or 3.0 64 bit releases, check <a href="http://wiki.mozilla-x86-64.com/Download">this page</a>
Otherwise, you might be interested in this: <a href="http://wiki.mozilla-x86-64.com/How_To_Build_Windows_x64_Build">How To Build Windows x64 Build</a>

I installed this new Firefox 4 on my Windows 7 64-bit OS and now it doesn't even open.

This web browser has turned out to be the worst thing I've ever had to deal with on my computer. I upgraded my Firefox 3.6.2 which was amazing and my go-to web browser. Now after many re-installs I still can't get this new thing to open. I'm going to lose it soon. Good thing I saved my bookmarks before. When I click the .exe file, it shows in my task manager that it is running but no windows appear. I've restarted my machine and tried everything possible to get it to work. NOTHING.

Thanks for the info airmanjack.
My firefox wasn't opening (windows 7 64bit), but was running in task manager, and was also using 50+% of my processor.
I'll try your trick tonight.
Firefox does open on my work computer, but I have problems with it crashing multiple times per day. Is there anywhere I can download the last version of Firefox 3?

ITunes 9.2.1, iPhone 4, Windows 7 64 bit not working together

I was able to connect my iphone 4 to itunes about a week ago. Then all of a sudden my iphone was not recognized in iTunes. I didn't get any error messages. I then upgraded to iTunes 9.2.1 on Friday in hopes that it would help. Unfortunately iTunes now takes >10 min to start, then after plugging in my phone, iTunes stops responding. Every once in awhile it will come back and I get the message "iTunes could not connect to this iPhone because an unknown error occurred (0xE800006B)". Although Win7 recognizes the phone as it pops up the auto play message and i can go to explorer and see it as a device. I have tried uninstalling and reinstalling iTunes. Confirmed it is the iTunes 64 bit version even though it looks like a lot of the processes are running in *32 mode. I have tried the what some of the support pages have indicated. I can't get anything to work. If anyone else has some other suggestions i would love to hear them.
Computer:
Windows 7 Home Premium Edition
AMD Phenom(tm) 9550 Quad-Core Processor 2.20 GHz
5 GB RAM
64-bit OS
Nvidia GeForce 9200 and 9300 GE display adapaters
Running ZoneAlarm for Internet Security and Virus

dylan1981 wrote:
The EXACT same thing is happening to me. My phone is brand new, so the fact that I can't activate it due to this problem is really frustrating. I've uninstalled and reinstalled iTunes several times, followed apple's instructions in its problem solvers guide...nothing seems to work. I've messed around with the drivers a bit too, with no luck. Anyone have any ideas?
Go to the Event Viewer (Control Panel || Administrative Tools || Event Viewer) and look under Windows Logs || Application. Do you see any Bonjour errors? Since Windows 7 recognizes the camera part of the iPhone (nicely done Win7 integration!) Microsoft is probably not the culprit here.
Uninstall/reinstall iTunes is part of the process, but you also have to make sure you uninstall all the other components Apple installs (Apple Mobile Device Support, Bonjour for Windows, QuickTime), do a reboot, and then install everything from scratch. That may fix the problem.
This is exactly what an Apple guy talked me through over the phone. (I think I even uninstalled Apple Software Updater) I had a similar problem with the iPad on Win7 x64 - it was Bonjour that is the culprit. The x64 flavor of Bonjour for Windows is not as stable as the 32-bit version.
But everything has been golden for me since the reinstall...
Give that a try.
Then if not, you could start looking to see if there is another ZeroConf/SSDP provider that is conflicting with Apple's somehow.
SS

Windows 7 64 bit not monitoring on UCCX 7.0(2)

Hi,
I upgraded a 7.0(1) system to 7.0(2) to get support for Windows 7 and CSD is still not able to monitor agent calls who are on Windows 7 64 bit OS versions. The 7.02 release notes document states WIndows 7 is supported and WoW64 but doesn't mention anything about any limitations that I can see. I've ran postinstall, etc and everything checks out.
In this document, it states Windows 7 / WOW64 suppoort for 7.0(2) but has note for 8-0 that montoring is not supported for WOW64 just for 8.0.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7282/product_bulletin_c25-563280_ps427_Products_Bulletin.html
So is there a special way to install CAD / CSD as WOW64 on Windows 7 64 bit, or is there something else going on preventing the monitoring not working for windows 7 agents? The supervisors can monitor Windows XP agents just fine, except for one agent which we're working on the agents PC to see whats going on.

There is no special way to install CAD, it is just a msi file. On both my Windows 7 professional machines it installed fine. I have remote access to a couple of the customers machines so I have tried uninstall/re-install. I did not want to patch the registry in case I BSOD their machine. If I was on site I would have a go.
The customer has around 180 machines running Windows 7 ultimate and none of them have installed the correct packet driver.
The install program must detect if this is a 64 bit OS and install the 64 bit driver, or in some cases maybe not.
If your machines have installed the correct driver there is a test program. C:\Program Files (x86)\Cisco\Desktop\bin.
Make a call from the agents phone, internal is OK and then run NICQ.exe its output is written to a file called NICQ_Output.txt
Graham

Firefox 17.0.1 windows 7 64-bit, not focused during start

Similar Messages

Maybe you are looking for