Firefox 20.0.1 with Shockwave 11.7.700.169 crashes when you access web pages with video content

I have a problem with Firefox 20.0.1 under Windows 7 with Shockwave flash 11.7.700.169. When I access a web site / web page with some content that requires Shockwave (usually videos) I can view the video, however, when I exit Firefox, it will crash with "Firefox encountered a problem - check for a solution ...". I also have a web site "MyHeritage" that when I access a family tree I repeatedly get a message "Video driver stopped working - NVIDIA driver ... has successfully recovered". If I disable Shockwave, Firefox will not crash in both cases, unfortunately, I cannot watch any video content.
I did go to the Adobe web site and updated what I thought was my version of Shockwave, unfortunately this installed Director for netscape V12.2, I have disabled this plug-in.
BTW - running Firefox in safe mode (add-ons disabled) stopped my NVIDIA driver from crashing and also stopped Firefox from crashing when exiting.

Please check if all your plugins are up-to-date using [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Similar Messages

Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page. I am using the ipad to replace piano sheet music. The challenge is that ordinary sheet music is on both a left and right page.

We are trying to use an ipad to replace ordinary paper sheet music on a piano. When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned. The idea with using an ipad is that a tap turns the page, it stays turned. However,,,,,ordinary sheet music is on both left and right pages. With one turn you get 2 new pages. The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano. If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice. We are trying to get used to using the ipad. We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages. Maybe this is getting too complicated.
Anyway to tie 2 units together
John

No way to control one device from the other. But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)? Not sure if that helps as it must make the actual print smaller to do so.
http://www.forscoreapp.com/about/#interface

Updated Firefox, now it crashes when opening certain web pages. Does not work in safe mode either.

I was using Nuance PDF Professional, but have changed it to updated Adobe to try and correct the problem - no luck. Update Flash - still no luck. Tried a couple other fixes from support - still no luck. I can not even use the support site because it crashes when I select a problem to investigate. Using IE and all is fine.

Are there any crash reports send?
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

Access web page with alternate tab displayed by default

I have a WebHelp project with a start page that displays the
Contents tab by default. Is there a way through the URL to have a
different tab (e.g., the Search tab) display by default? Thanks.
Tim

I need a way to open the same WebHelp project with the
Contents tab displayed by default if the project is accessed
through one method or with the Search tab displayed by default if
the project is accessed through another method. I am using RoboHelp
X5.0.2.
Peter, I generated my project with the Search tab set as
default. I viewed the start page, and the Search tab was correctly
displayed by default. I made a copy of this start page and saved it
to a different folder location. I regenerated my project with the
Contents tab set as the default. I copied the alternate start page
into the project so that I essentially had a start_contents.htm
page and a start_search.htm page. This method was ineffective. Both
the start_contents.htm page and the start_search.htm page now open
with the Contents tab displayed by default.
Is there a way through the URL to be able to specify the tab
to display by default (sometimes the Contents tab and sometimes the
Search tab) for the same help project, either through using
multiple start pages (which in my test appears to be ineffective)
or through additional code in the URL itself?

HT4168 Can you do web pages with this application.

Can you do web pages in the PAGE application?

Sadie,
No, Pages doesn't produce web page code.
Jerry

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

Using the Motorola Atrix w/ the laptop dock, when I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up so pages open the right size?

I'm using the Motorola Atrix smart phone with the Laptop Dock. When I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up the Firefox browser to open the web pages the right size in the first place?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: 
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: 
https://addons.mozilla.org/en-US/firefox/addon/2592/

On a long web page with many small pics Firefox (4.0.1 on Linux Mint 11) doesn't load them all at once, and MAFF replaces original pics with blank lazy.png

Similar problem trying to save web page with ScreenGrab! (many small pics on the web page are blank). Maybe there is a way to fine tune Firefox?

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

3px framed picture on a Web page with Internet Explorer and Google Chrome appears normal, but Firefox is on the right side frame 9px. Why?

3px framed picture on a Web page with Internet Explorer and Google Chrome appears normal, but Firefox is on the right side frame 9px. Why?

I'm not seeing this.
Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
Can you attach a screenshot?
* http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

Printing web page with select tags in IE9 and a .cfm file-only the original selected option prints

My web page has a select tag and cfselect tags and when I print the page with a different option other than the originally selected option the print for both types of select tags reverts back to the original selection and ignores the new selection. This happens in IE9 and .cfm files but not when the page is printed in IE8 or IE7 modes (tried in the F12 Developer Tools.) It also needs to be a .cfm file. FireFox printed the pages correctly for any combination.
This was done on a Dell and ThinkCentre computers under Windows 7. Also, I was able to reproduce the same problem on an different university web site where a selection box would revert back to the original selection for printing on a .cfm page and would print properly on a .PHP page at the same site.
For my site, I used a print button which calls print() and right clicked and chose print and got the same results no matter which method was used. I only had the right click method on the third party web site.
I know this is probably a bit narrow an issue but, any help would be appreciated.

It appears that it is probably an IE9 bug.
I simplified the problem by turning the page source taken from the brouser of the original .cfm into an html file and found that it would still print improperly.
When I eliminated the various parts of the file I found that it would print correctly only when I removed the first line, the "DOC type" line.
The page will print the newly selected option but then I lose the style sheet.
If it does not work in an HTML file it must be IE. It is not the .cfm. The reason that it did not work for .cfm files, is that they always have a "DOC type" statement.
I have put the issue into an MSDN forum in addition to the one mentioned previously.

On a web page with an editable table, the delete row function no longer works (the little circle with X button)

When you try to delete a row in an editable table using the built-in functions, it no longer works. We use this function regularly and just noticed this problem today. The "create row above" and "create row below" functions work, just not the delete. The delete column button does work however, so it's a bit baffling why this one function does not work. (The pages are located on our internal server so are not publicly accessible but the functionality is built into firefox.)

Same problem here. I found out that when you have a table with only 1 row, it works fine, but when you have multiple rows, it doesn't work on any row.
Micmark, do you have that too?
P.S. I also tried this outside our CMS, by using Firebug to add a contenteditable="true" on a DIV in a normal font-end template, and that has the same problem.

Using Firefox and BigPond email, can't open email links when in a web page page.

In Australia - Victoria. Using Telstra Bigpond as email/internet provider. When browsing web pages with email links, cannot click on the link to open the email link. It says, no default email program exists. Email works fine outside of a web page. Can anyone help?

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Dreamweaver CC crashes when moving a DIV field with the keyboard arrows.

I'm really fond of the new Dreamweaver CC, but on some occasions, it crashes when moving a DIV field with the keyboard arrows, for example, to move it two or three pixels.
This is happening on a recent pc (i5 / 16Gb ram / Intel SSD / Bootcamped Windows 8 x64)
F12 is also really slow when publishing via Chrome. Firefox or Internet Explorer is faster.
Is there a fix for these issues?
Thanks,
D

Apart from the FluidGrid Layouts feature, DW is not a click and drag app like Photoshop or Muse. You should be using the CSS panels to align elements with floats, margins and padding.
Keep Chrome open and refresh browser (F5).
Nancy O.

Why will safari not load web pages with the prefix "fhp"?

Why will safari not load web pages with the prefix "fhp"?

Because it doesn't recognise them as valid addresses - just as the error message says.
Firefox is similar : Firefox doesn't know how to open this address, because the protocol (fhp) isn't associated with any program.
Where are you seeing this problem ?.

How do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA certfificate i can't open web pages with this, how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC CA certfificate i can't open web pages with this

how do i open a web page with VeriSign Class 3 Extended Validation SSL SGC SS CA ?

Hi
I am not suprised no one answered your questions, there are simply to many of them. Can I suggest you read the faq on 'how to get help quickly at - http://forums.adobe.com/thread/470404.
Especially the section Don't which says -
DON'T
Don't post a series of questions in a single post. Splitting them into separate threads increases your chances of a quick answer.
PZ
www.pziecina.com

Firefox 20.0.1 with Shockwave 11.7.700.169 crashes when you access web pages with video content

Similar Messages

Maybe you are looking for