Firefox 21 not detecting window unload nor window onbeforeunload events

Doing a website and want to change users online status when the browser is closed.
Only works when the tab is closed and not when the browser window is closed.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Similar Messages

Asked to reboot to complete install stuck, will not go away, can not use Firefox, can not uninstall, windows based

asked to reboot to complete install stuck, will not go away, can not use Firefox, can not uninstall, windows based
I chose to delay reboot
Rebooted later
When trying to use Firefox it ask for reboot
Stuck in a loop

I thought I would copy your other post ([/questions/887645] ) <br/>
|
Let me rephrase in question.
locking as a duplicate - https://support.mozilla.com/en-US/questions/88761 - please edit your original question instead of starting a new thread <br/>|<br/>
I installed Firefox 6.0.2 on a Windows Server 2003 box. This box is a terminal server with 9 users that are going to use Firefox. The other users are going to use IE. When asked to reboot now or later, I chose Later. After sometime I rebooted, the message "you need to reboot in order to complete the install" reappears. Over and over again. Can not uninstall (same message) Can not open Firefox (same message) Many reboots using various users, the same results.
Help!
|
The question appears to relate more to the OS than be a firefox problem, but as I have never used Windows Server 2003, I am unable to help.

How to detect window close event and do some task before exiting

Hi
Anyone knows how to detect window close event and do some task before exiting ?
Sridhar
Solved!
Go to Solution.
Attachments:
window close event.JPG ‏34 KB

Yes .You can discard the panel close event by passing "TRUE" boolean value to the "discard ?" terminal which is lied in the right side of that panel close(filter) event.& It will work in executables. See attached picture.
Attachments:
Panel Close.JPG ‏12 KB

Firefox is not allowing windows 7 to go into sleep mode.

The new version of Firefox 6.0 is not allowing Windows 7(64-bit) to go into sleep mode. When the browser window is closed it will go into sleep mode. When I have Firefox running it won't go into sleep mode. This only started happening once I upgraded to version 6. How to I fix it, or is it a known issue?

Found it in another thread here. It was a queued print job. Looks like its a common problem and maybe a bug? Once it was deleted, sleep was back to normal.

Boot camp does not detect windows anymore

hello
i have an iMac, osx Lion, i was using boot camp for windows xp, the cmd button did not work for some time and since i had to access some info on osx and was fed up with pushing over and over again the cmd on start, i went to windows control panel and changed the default opt on startup on osx.
after that the only option remained was osx lion, nothing shows windows partition anymore except the space on disk that is used but cannot be accessed. I would really need to access that, i have lots of stuff there i also use windows on mac for playing a game which sadly does not work on osx (League of legends). I tried using cmd+r, nothing happened. I am very sad and dissapointed, please someone help me.
with best regards,
me

you still have not clarified if you used BCDedit or repair the MBR
Whether you used an NTFS driver - that may be all you need - try the full functional demo Paragon NTFS for OS X, it is great at mounting PC NTFS volumes and cases.
http://www.paragon-software.com/home/ntfs-mac/
There is no such thing as "boot camp" to detect Windows. Poor language. BCA partitions. Do you want to remove XP partition? that is the tool.
Boot Camp control panel in Windows that has a Startup Disk style feature.
But "boot camp" means zilch other than installing a set of drivers and the creatiion of a partition.
Of course Lion Recvovery only works with OS X, not XP. There is a hidden feature to show all partitions and their health but nothing more.
Backup everything and rebuild and restore.

Grub not detecting Windows on RAID 0 array.

I'm having some trouble with my RAID array. I have tried to research this, but all I can find is how to install Arch Linux ONTO an array, not how to detect Windows on one, and configure grub for it. I have two SSDs in a RAID 0 configuration, which holds my Windows 7 installation. I then have two HDDs in JBOD. One of those HDDs is my mass storage drive for Windows and Linux, the other is my Arch Linux install.
The problem is that--with os-prober installed--Grub isn't detecting my Windows install. I was trying Fedora when I converted my Windows install to RAID 0, and Fedora picked up on it when I ran grub-mkconfig with os-prober installed. Grub at that point was pointing at /dev/mapper/<some random-seeming string> for Windows, and it worked.
Now that I'm back "home" to Arch Linux, I am trying to get grub to see Windows, but it never detects it. /dev/mapper/ is empty except for 'control', and /dev contains sda and sdb, which are the drives that are supposed to be in the array. At this point, I'm completely lost. I'm not even sure if this is software or hardware raid. I thought it to be hardware, because my motherboard has a RAID option rom on it, which is what I used to build the array, but the /dev/mapper stuff makes me think it's software.
Can anyone at least get me pointed in the right direction?
Thank you,
KD0BPV
Last edited by kd0bpv (2012-12-08 10:25:12)

Well, I did add ntfs to my initramfs, but it still dropped into an emergency mode terminal. I checked to make sure that it was successful, and the ntfs kernel module was loaded. Any ideas?
# lsmod | grep ntfs run in emergency shell:
ntfs 191626 0
/etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="ext4 ntfs"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect pata scsi sata dmraid filesystems usbinput fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
The systemd journal is still showing the same errors I posted earlier.

Detect window closing event in AIR application

How do I detect the window closing event in an AIR app? Tried
the following.
deactivate and windowDeactivate events in the
WindowedApplication tag.
addEventListener(Event.CLOSING, onClose);
addEventListener(AIREvent.APPLICATION_DEACTIVATE onClose);
addEventListener(AIREvent.WINDOW_DEACTIVATE, onClose);
None of them seem to work.
Any ideas?
Thanks
CS

The following works for me:
<mx:WindowedApplication xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute"
closing="traceEvent(event)"
windowDeactivate="traceEvent(event)"
applicationDeactivate="traceEvent(event)">
<mx:Script>
<![CDATA[
public function traceEvent(event:Event):void{
trace(event.type);
]]>
</mx:Script>
</mx:WindowedApplication>
As does:
<mx:WindowedApplication xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute"
applicationComplete="init()">
<mx:Script>
<![CDATA[
import mx.events.AIREvent;
public function init():void{
this.addEventListener(Event.CLOSING, traceEvent);
this.addEventListener(AIREvent.WINDOW_DEACTIVATE,
traceEvent);
this.addEventListener(AIREvent.APPLICATION_DEACTIVATE,
traceEvent);
public function traceEvent(event:Event):void{
trace(event.type);
]]>
</mx:Script>
</mx:WindowedApplication>

Firefox will not detect my headphones

Firefox 3.6 will not detect my Plantronics USB headphones. Speakers play fine, but I want to listen through headset.

Try restarting Firefox after you plug the headphones in.

Window.open opens new Firefox page, not a windows exploer window

I have a javascript code within Dynamics CRM to open a windows explorer window if a field is double clicked with the folder location in that field. For example, if our local server name was COMPANYSERVER
If the field contained \\COMPANYSERVER\Accounts and you double click it, that windows explorer window shows the Accounts folder in the COMPANYSERVER, and I can navigate to any child directories.
If we use CRM in Internet Explorer, this works fine. However if CRM has been opened in Firefox, instead of opening a windows explorer field, it opens a new tab in Firefox, with a File or directory not found error, obviously because it is trying to find a webpage rather than an internal directory.
I was not sure whether to log this on a Dynamics forum or Firefox forum, so I have done both, but as I say, it works perfectly with IE so I guess it's something I need to do differently for firefox, or change a setting somewhere within firefox?
I am very new to firefox, so if you can be quite basic with your answers I would really appreciate it!

I personally have not done this before, however there are two old sources that have both referenced the IE Tab extension.
http://www.powerobjects.com/blog/2008/06/02/dynamics-crm-in-firefox-you-betcha/
*Is Firefox the default browser?
*Does it automatically run Firefox as the Administrator that is logged in?

Firefox will not open windows that are linked on a site, for example reviewing a piece of work that has a link which opens it in a new window.

There are links on site that open in new windows and close after you are done. Like A review link/box. The window opens but it's a blank page and the url books just says "search bookmarks and history".
== This happened ==
Every time Firefox opened
== I changed a theme/Just before I upgraded firefox

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Bootcamp does not detect windows 7

I am trying to create a partition for which I have inserted windows 7 original dvd and trying to go further. After waiting for some time I cicked next to go further bu drive ejects orginal program DVD and does not get detected. I tried other media that do also does not get detected. Give me solution if any one has encountered this situation

Could be your dvd drive is faulty. When you are in os x can you read the windows dvd.

[SOLVED] Grub Not Detecting Windows

Hello,
So here's the scenario:
I initially had Ubuntu and Windows 8, but couldn't boot, so I used boot-repair (via live Ubuntu), and it got fixed; I could use Windows 8 again (Ubuntu didn't matter).
I then deleted Ubuntu, then installed Arch instead. Grub was successfully installed, Arch and Windows 8 are shown, except when I choose Windows 8, it goes to the Windows Boot Manager (which shows a single choice of Windows 8). When I choose it, it says that it failed to start.
File: \Windows\system32\config\system
Status: 0xc000025
Info: The operating system couldn't be loaded because the system registry file is missing or contains errors.
How can I get it to work as before?
I've tried using a custom.cfg as suggested in the manual
menuentry "Windows 8"{
set root="(hd0,1)"
chainloader +1
The entry showed up after running grub-mkconfig, except that it did the same thing as the original choice detected by os-prober (as in the one during the installation mentioned above).
By the way here's my partition layout:
/dev/sda1 Windows System Reserved
/dev/sda2 Windows
/dev/sda3 Arch
I also tried to set root to (hd0,2), but it gave a similar error:
File: \Boot\BCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains error.
I believe this is because I've tried to work with EasyBCD/BCDedit before.
Last edited by jddantes (2014-04-16 11:20:46)

Finally solved it!
It was more of a Windows problem than an Arch one. I used Live Ubuntu's GParted and noticed that my Windows partition (/dev/sda2) was marked by an exclamation point. I right-clicked to Information and this was the message:
ntfs_decompress_mapping_pairs: Input/output error NTFS is inconsistent. Please run chkdsk /f on Windows then reboot it TWICE!
I was starting to download a Windows 8 ISO, but thankfully I found out that you could create a recovery drive from an existing Windows 8 installation (I had another computer).
Failed attempts:
There was no reinstall option for me (looking back at it, that's a good thing), so I went for the Fix Startup Problems options. I ran it thrice and I stopped because it finally said that it couldn't fix it.
I had no System Restore Points either.
I wanted to see if the Continue to Windows 8 option would magically be able to boot it, but after the screen froze for 2-3 minutes, I rebooted and went for the Command Prompt.
More failed attempts with the Command Prompt:
I was able to find this http://social.technet.microsoft.com/For … proinstall
The instructions were:
Type Bootrec /RebuildBcd, and then press ENTER.
If the Bootrec.exe tool runs successfully, it presents you with an installation path of a Windows directory. To add the entry to the BCD store, type Yes. A confirmation message appears that indicates the entry was added successfully.
If the Bootrec.exe tool cannot locate any missing Windows installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order in which they are presented. Press ENTER after each command.
Bcdedit /export C:\BCD_Backup
ren c:\boot\bcd bcd.old
Bootrec /rebuildbcd
Restart the computer.
So I tried, but it failed anyway. Then I began to notice. The current directory was X: (I was booting from the USB), and by some chance I managed to figure out that there were also C an D.
I searched for the command to display the disks:
http://www.computerhope.com/issues/ch000854.htm
wmic logicaldisk get name
What I wanted was E. (This is what will be C normally, with the Program Files and all). I also had F, which I will guess will be the free space remaining which I put aside for swap (it couldn't be accessed in the Prompt with dir f:).
I tried the above solution with E instead of C, but it failed.
What finally worked:
chkdsk /f e:
And now it boots when I choose it in Grub. Sometimes the Windows Boot Manager pops up, but whether it does so or not, Windows 8 loads properly.

Audio is not detected / Windows 8

First I was having trouble to open the program.
It was happening the following error:
"Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules.
Please update your video display drivers and start again."
I solved the issue changing the settings in the Switchable Graphics.
However, the program is not working properly. When I import a video, it doesn't come with audio.
I tested the same video in another laptop, in which the Windows is not the 8, and the audio worked well.
What should be the problem?! What can I do to solve it?!
Thank you very much,
Aline.

Two things...
1st, More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
2nd, what are you editing?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
And, a general comment on making sure your video is recognized
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Application Requirement Not Detecting Windows 8.1

Hi all - Wondering is anyone else is seeing this behavior. If I deploy an application that has no OS requirement set it will show up fine on a Windows 8.1 machine. If I add an OS requirement for all Windows 8 (All Windows RT, All Windows 8 (64-bit)
& All Windows 8 (32-bit))) the machine does not show the application as available. Below is an excerpt from the AppIntentEval.log before and after the Windows 8 OS requirement is selected. It appears that SCCM is not picking up the Windows
8 OS requirement properly. Am I missing something? Enviroment is ConfigMgr 2012 SP1, client version is 5.00.7804.1202.
With no OS requirement selected.
ScopeId_A0D7A85E-A3C2-486D-8931-493AB26E1100/Application_2d5ea2a6-9567-4deb-89c0-03420259ad2e/16 :- Current State = NotInstalled,
Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = App-V 5.0 SP1
With OS requirement Windows 8 selected.
ScopeId_A0D7A85E-A3C2-486D-8931-493AB26E1100/Application_2d5ea2a6-9567-4deb-89c0-03420259ad2e/17 :- Current State = NotInstalled,
Applicability = NotApplicable, ResolvedState = None, ConfigureState = NotNeeded, Title = App-V 5.0 SP1
Thanks,
Rick

I may have found my issue. Looking at
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientOS it looks like Windows 8.1 only shows supported under SCCM 2012 R2. This could explain my unexpected behavior under SCCM 2012 SP1.

AirPort - Not detecting Windows XP

I´m trying to acess my air port (using AirPort Utility) and Windows XP is not founding my airport ????
Im trying to rescan my airport !
Some point that I tried:
1.Acess my Air port using a cable;
2.My firewall is turned off;
3.I reistalled my Airport utility 3 times.
Somebody could help me ?
DELL Windows XP

I do not have a PC here running XP to test, but if I did I would do the following:
1) Turn off the Windows Firewall in the Control Panel
2) Temporarily disable the anti-virus software
3) Perform a Factory Default Reset on the AirPort Express
4) Connect the Express using Ethernet, open AirPort Utility to see if it will connect to the Express
5) If still no luck, in AirPort Utility, click on the File menu in the upper left corner of the screen and select Configure Other. Enter 10.0.1.1 for the IP address and "public" (without the quotes) as the password
If still no luck, the HP is likely running some other applications that may be interfering with the connection. I assume that the AirPort Express is not defective and the Ethernet port on the PC is operational.

Firefox 21 not detecting window unload nor window onbeforeunload events

Similar Messages

Maybe you are looking for