Firefox 26 crashes on exit in Windows Vista Ultimate 32-bit.

It doesn't matter if I click the Red X, go under File -> Exit or type Alt + F4 to exit out of Firefox under Windows Vista Ultimate 32-bit. It almost always produces an error message that Firefox has stopped working.
I can't find how to post a JPEG Screenshot of the error message here.
This doesn't occur under Windows XP Pro.
Otherwise, the browser works fine under either OS.

Here's the screenshot(s). I had to take 2 because the lower portion of the error message that lists the details won't expand.

Similar Messages

Installing Windows Vista Ultimate 64 bit on Bootcamp issue

Hi I'm a newbie, I would like to install Windows Vista Ultimate 64 bit using boot camp. I went into boot camp to partition and split the 1 terabyte hardrive. half is for Leopard, the other half is for Windows Vista.
I followed the steps and popped in the disk, awhile later I get a message saying "Where do you want to install Windows?"
It's showing:
Disk 0 Partition 1 200 mb primary
Disk 0 Partition 2 466 gb Primary
Disk 0 unallocated space 128 mb
Disk 0 partition 3 Boot camp 464 gb Primary.
which ever one I click on it says "Windows Cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS"
I can't get passed this part, what do I do?
Any help is greatly appreciated

Hi Stuart,
Vista needs its system partition to be formatted with NTFS.
The BootCamp Asistant does a pre-format with FAT32 since OSX can not write to NTFS partitions (only read).
Therefor you have to reformat the Windows partition with the Vista Installer to NTFS.
See page 11 of the BootCamp Setup Guide found here http://www.apple.com/support/bootcamp/ (and it's also part of the BootCamp Assistant).
Regards
Stefan

Bootcamp: Sound not working on Windows Vista Ultimate 32-bit

Hello everyone, I've got quite an unsual problem (whell at least I think anyway). On my iMac (Mid 2008, 2.4Ghz C2D, 2GB ram, 2400XT), I recently installed Windows Vista Ultimate (32 bit). I've been using the sound out of the speakers, until now when I decided to connect some extenal speakers. I have the bootcamp drivers installed (from Snow Leopard DVD). When I plugged the headphone jack into the headphone socket on the back, I noticed that the sound was still coming out of the speakers, so I opened the preferences and it showed that I had something plugged into the line-in jack- which I didn't! I removed the headphone jack from the headphone socket and plugged it into the line-in. Nothing changed in the preferences. So basically, Windows thinks the line-out port is line-in! I would appreciate some help with this issue, not sure how common it is!
Thanks :-)

Hi I'm not sure if this is going to help but have you got the service pack 1 installed on your laptop as when I installed it on my desktop the first time it caused blue screen errors and gave me loads of problems including error messages that seemed to come up with every application I opened and an annoying driver IQRL equal or less than but couldn't work out why and then in the end I had so many problems I had to totally reformat my desktop and I removed my XP scanner and webcam(both had vista drivers) and when I reinstalled the service pack 1 it was fine, so do you by any chance have anything attached to your laptop that was XP and has vista drivers as these seemed to be what was causing my errors.
Also a question about your graphic card drivers, I've got the same laptop as you and was looking for the graphic card driver updates and couldn't find them anywhere on the site, where did you find yours? I'm using Vista Home Premium 32 bit , my model number is A200-28P(PSAE6) and I'd love to know if there is a newer graphics card driver but can't find it on the knowledge base so the fact you've updated yours would you mind pointing a new user in the right direction :-)
Thanks,
Simreaper

I tunes 7.3 and Windows Vista ultimate 64 bit ( not 32-bit) compatibility

Dear All,
I tried succesfully to sync my I tunes with my HP Laptop with the Windows Vista Ultimate OS 64 bit not 32-bit version.Has anyone been able to sync it succesfully?
If not does anyone know of a patch or when apple is going to come up with a version of Itunes that would take care of this incompatibility?
Mo

Hi,
Try disabling your antivirus software. This seems to work for alot of people Tell me if this works for you as well.
xxmitchxx90

ITunes and Windows Vista Ultimate 64-bit

Is there an iTunes version that is compatible with the 64-bit version of Windows Vista Ultimate? If so, can you please let me know?

I have iTunes 7.3.2.6 running on Ultimate Vista 64. I initially had problems with it recognizing my DVD-RW but eventually found a solution in this group related to the GEAR drivers.
The only problem that remains is not recognizing the current user as administrator unless you "launch as administrator." But this has not affected performance.
BTW, when application developers list "32-bit Vista" under system requirements, this does not mean that 64-bit Vista versions can't run it, it only means that it's not a 64-bit app. Vista 64 is designed to run 32-bit apps.
Message was edited by: erazoner

Installing Captivate 2 in Windows Vista Ultimate 64 Bits

Help help help !
It just doesnt worked.
I have tried all kinds of things (like removing UAC), running
in compatibility mode WXP SP2, always running as an admin
(explicitly). Does Captivate 2 installer work on Windows Vista
Ultimate 64b ? If it does what am i doing wrong?
Thanks to all in advance for any help you can give me.

I don't believe CP2 is Vista compatible, only CP3 is.
http://www.adobe.com/support/documentation/en/captivate/2/releasenotes.html#sysreqs
Erik
boriskasparov wrote:
> It just doesnt worked.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Windows Vista Ultimate 64-bit Full PC Backup/Restore

I have created a Complete PC Backup supplied in Windows Vista 64bit Ultimate for my HP Pavillion dv5, but I am unable to find a way via the Restore Manager to restore the image file.
In the Restore Manager suite there are only options to restore to a previous Windows restore point.
I have applications and data in the Complete PC Backup that I want to restore.
I have tried to find a similar function in the Restore Manager suite, but it only has the backing up of files; no Complete PC Backup.
Now I am stuck, unable to restore my former PC.
What can I do? Any suggestions?

Take a read of this thread.
BTW.. did you mean Recovery manager instead of restore manager?
Windows has system restore.
Cyberlink has recovery manager.
The two are apples and oranges.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows vista ultimate 64 bit PDF export error

Hi there, I'm using diadem 11.0 and i have a big problem with my new os.
When i try to export a report in pdf i get a print error in the status of the "diadem pdf export" printer.
Any idea or solution for fix this problem ?
Solved!
Go to Solution.

Thanks for the support Brad, i have tried to download and install diadem 11.1 but it didn't solve the problem.
After that i've tried to search in the amyuni forum for a solution and i found out this (it solved my problem)
Windows Vista:
Make sure that you are logged in as Windows administrator.
Click the Windows button and click Printers.
Right-click the Diadem pdf Export and select Properties
Click the Ports tab, then click the Add Port button.
Note: If the Ports tab is greyed out, right-click the Diadem Pdf Export icon and select Run as admin.
Select Local Port and click the New Port button.
Enter PDF1 for the new port name and click OK. Close the Printer Ports window.
Put a checkmark in the box next to the PDF1 port if it is not already checked.
Click on the Advanced tab.
Select the Spool print documents radio button to make the options below it clickable.
Clear (uncheck) the box labeled Enable advanced printing features by clicking it.
Select the Print directly to printer radio button to make the options below not clickable.
Click the Apply button, then click OK.
Important: In order for the changes to take effect, you must restart your computer.
Reboot your computer and then try to print, email, or create a pdf from Diadem.
Regards,
Ierman Gert

Re: Windows Vista Ultimate 32-bit FN key and Bluetooth crash

I have an old problem with FN key. I installed Vista and after a while, it stops working. In Windows, when I press the FN key it freezes about 3 seconds, a blue screen appears that tells me Vista has crashed, a memory dump begins and then the laptop restarts. And now, bluetooth doesn't work anymore and if I try to enable it it dows the same thing.
P.S. The Windows is new installed (4 days), and has automatic updates to date.
I reinstalled Toshiba Value Package, Bluetooth Monitor and Bluetooth Stack.

LE: I uninstalled Value Package and it doesn't give me the blue screen anymore. The FN key works, but it doesn't display that menu on the top of the screen when i press it, but the functions work.

Im trying to install iTunes on my friend's Dell XPS, running windows vista ultimate (32-bit), but whenever I reach the end of the install, it pops up with an error telling me: "Service 'Apple Mobile Device' (Apple Mobile Device) could not be instal

Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Burning issues with itunes and Windows Vista Ultimate

I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
Thanks

paul's onto it.
if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
GEAR drivers

Windows Vista Ultimate & iPhone

Yesterday I received an iPhone for my birthday and discovered it doesn't work with Vista Ultimate. When I called Apple care they told me that the box clearly states only "Vista" as compatible. I find this very odd since I don't know of a plain "Vista". There is Home,Home Premium, Business,Ultimate, etc..
After some discussion they finally agreed to take it back without the restocking fee but I am still depressed about it.
Has there been any news about support for ultimate? Why does my iPod and iTunes run perfectly but the phone won't?

It doesn't work with Windows Vista 64-bit (I've tried) but it does work with Windows Vista Ultimate 32-bit. I'm using it now with no issues.

Problem with the new 64-bit edition of iTunes -- Windows Vista Ultimate

Very recently, I upgraded from Windows Vista Ultimate 32-bit to the 64-bit edition. I also downloaded the 64-bit edition of the Windows-based iTunes.
My individual iTunes music files were stored on a separate internal hard drive that was never a part of the upgrade overhaul (C: drive was upgraded to the 64-bit edition; my iTunes files are located on the D: drive).
After opening iTunes, I immediately went to Edit > Preferences > Advanced (tab) and changed the "iTunes Music folder location." I located my iTunes folder on the D: drive and clicked "Select Folder."
Unfortunately, nothing happened. Meaning, iTunes does not recognize any of the files located within this iTunes folder. This is the exact same iTunes folder that I used under the 32-bit edition of the OS.
I have nearly 50 GB of music files, none of which are now part of my music file library.
What's going on?

Chris CA wrote:
If the songs are not tagged correctly (title, album, artist at a minimum), they will go into Unknown.
If they are tagged correctly, go to iTunes prefs -> Advanced and uncheck *Keep iTunes music folder organized* then close the prefs.
Re-open prefs and recheck *Keep iTunes music folder organized*.
All my music was imported from CDs using iTunes.
After unchecking "Keep iTunes music folder organized" it doesn't make any difference. Virtually everything is in "Unknown."
I can't believe this..... it's like iTunes doesn't recognize its previous handywork.
Very frustrating!
If anyone know a way to quickly clear this up, let me know.

Why does my Windows 7 Ultimate 64-bit taskbar fall behind my Firefox 3.6.8? Any fixes?

I am running Firefox 3.6.8 on Windows 7 Ultimate 64-bit. Quite often, and for no consistent reason, Firefox will move itself in front of the Windows taskbar (which I have set to auto-hide). My fixes are to "Restore Down" Firefox and click on the taskbar to move it back in front, or shut down Firefox and relaunch it. I read on another forum that this is a known bug, however I am unable to find any information regarding this problem on this forum. I have Firefox set to auto-update and I did not have this problem until I upgraded to Firefox 3.6.8.
The fully updated add-ons I am using are :
Adblock Plus
AI Roboform
BetterPrivacy
Download Statusbar
Fasterfox (EladKarako Mod)
ImageZoom
No Script
NoSquint
Tab Mix Plus

Stan_R wrote:
link no longer works
You are correct, but you have pulled up a post that is over 3 years old!
If interested in syncing to a 64bit system, please view the sticky thread at the top of this section entitled "64bit Windows USB Drivers for Palm Desktop"...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Firefox 26 crashes on exit in Windows Vista Ultimate 32-bit.

Similar Messages

Maybe you are looking for