Firefox 3.6.10 update won't install and keeps crashing over and over.
My Firefox downloaded and installed the 3.6.10 update. After restarting it is trying to install the update, but then can't so it crashes/quits. Then it trys to start again and can't install then crash/quit. I'm stuck in a loop. Same thing in Safe Mode. I cannot even use Firefox at this point. Not sure if its related but I started having Flash problems on the 3.6.9 update.
Ff 3.6.10 is the worst ever piece of software that I have put my hand on for many many years. It is irresponsible of the ff folks to have released this without minimal testing.
In my case the installer asked me to reboot the system at the end of installation. and I did. After that in every occasion that I click the ff icon it tells me: Your computer must be restarted to complete a previous upgrade of firefox. Do you want to reboot now? If you say no, it just dies away without any joy. Simply no internet.... if you say it reboots, and clicking on the ff icon after the reboot pops up the same message: Your computer must be restarted to complete a previous....
The painful thing is that the uninstallation via the control Panle's "add and remove programs" also shamelessly pops up the same message with the same never-ending-rebooting process:Your comupter must be restarted to complete....
This is the worst piece of crap I have ever seen.
Best regards
Nasser.
Similar Messages
-
Few days ago it blocked all my laptop...i had to restart the laptop(windows 7)...it appeared also that flash player has crashed...than that i have to update quick time....I installed firefox 4 few months ago...and few weeks ago i installed the latest version..and now i have this problems.So i reinstalled firefox...reinstalled adobe flash player..reinstalled quick time..so far so good..it worked but today i am still receiving crashing reports like i need to close firefox first before opening a new page..i cleared my cache browser...i clened it few times from the menu toolbar before and after reinstalling..and after crashing last time..also i used ccleaner few times and nothing!I don't know what else to do
James j,
You have a different problem. Your screenshot shows "The Adobe Flash plugin has crashed".
See [[Plugin crash reports]] and [[The adobe Flash plugin has crashed]]. If you need more help you should [[ask a question|ask a new question]] (start a new thread). -
Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris HansenHi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support -
Windows Updates won't install - Error 0x80072EFD
Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit
-
10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help
Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update
-
latest iTunes update won't install correctly. Says to shut down iTunes for update to complete. I've made sure 3 times that iTunes was not opened.
I'm having the same problem with Windows 7 and cannot download direct from the website.
-
Question
Firefox 6.0.1 update won't recognize the home page which uses a password access which has been saved into 6.0.1. The security shows permissions for the web site but doesn't recognize that I've been accessing the web page every day since I updated to 6.0.1. Web page trying to access is <http://classic.wunderground.com/cgi-bin/findweather/getForecast?query=zmw:98108.5.99999> This home page worked fine on earlier versions of Firefox and continues with Internet Explorer 9.0.Looks like its been fixed for me, not by 6.0.1 but by - Todd Siechen from http://www.dvdthemepak.com
Check out his post at:
http://discussions.apple.com/thread.jspa?threadID=335417
Todd... I love you xxx
After having a nightmare since first day of version 6.0.0 and still no fix after 6.0.1, even after Apple requested the files... You fixed my problem... Checked for duplicate fonts and found about 5, selected "Resolve Duplicates" and everything great, even with old projects... You should work for Apple!
Check out the 2 posts:
http://discussions.apple.com/thread.jspa?threadID=313109
http://discussions.apple.com/thread.jspa?threadID=366383
1) The first and biggest culprit we found to be causing problems is with font issues. In order to alleviate this problem, open Font Book and make sure all the Fonts that are turned on have no dots next to them. If they do then select them and select "Resolve Duplicates" from the Edit menu. If you are using a different font manager then use whatever tool is available to make sure no duplicate fonts are loaded. iDVD 6 is very sensitive to this.
Many many many many many many many many many many many many many thanks.
Regards,
Charles Teton
United Independent Pictures Ltd.
http://www.makingmymovie.com -
Updates won't install,billing info wrong
Updates won't install,keeps saying problem with billing info,then there was a problem with a previous payment,but I can't find out what is was.
You'll have to update your billing info from itunes, here's a guide on how to do it on iOS http://support.apple.com/kb/ht1918?viewlocale=nl_nl . It may be that there weren't suffecent funds at the time of the last purchase, in which case you'll just have to varify the three digit security code. Hope it helps!
-
Illustrator update won't install, even after uninstalling and retrying multiple times.
Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
The error message I get in Application Manager is:
"Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
Help!Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers. This should then remove the Adobe Application Manager folder also inside Utilities. Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/. -
New update won't install on my Dell Laptop Windows 7. Even tried from the iTunes website. Now all of my access is gone. What must I do?
Hello SandyJeanne,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
Jam Pack 4 update won't install
I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
Any help out there for this?try repairing permissions:
http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions -
IPhoto 9.1 update won't install
I just bought a new MacBook Pro. It came with iPhoto 11. The iPhoto 9.1 update won't install. It keeps saying that I need iPhoto 9.0 or greater, but I have iPhoto 11. I have not moved iPhoto from its default location. My computer is only 2 days old. I've seen others with this problem, but no real solution. Anyone have any suggestions?
Thanks for your response TD, but this App, iPhoto 11 came already installed on my computer. I registered my computer, but you can't register a product without a serial number. I don't have the iPhoto 11 serial number because it came installed on my computer already. I tried re-installing iPhoto 9.1 after registering my computer and got the same error message. However, I did find out that I hae 90 days of complimentary phone support. So I will be giving Apple a call.
-
What can I do for an Ipod that won't update, won't allow you to eject it, and can't reset either? I can simply unplug it from my pc and after a while it runs down and works fine after a charge. Wanting to clear data and sell but nothing seems to work. The ipod was originally set up on a different computer and with a different I tunes account as well. Would that make any difference?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
Updates fail to install because Microsoft Database Daemon and SyncServices Host fail to close. Any help?
Ask on the Microsoft Mac forums since it's their product you're having trouble with. these forums only provide support for Apple products
http://answers.microsoft.com/en-us/mac -
After iOS 8 update no mobile signal and keeps crashing
My iPad 4 is about a year old and I recently updated it to ISO8 big mistake as it now has no mobile signal reception and keeps crashing. restored to factory setting using iTunes and now won't activate, iTunes account won't accept it and the iPad keeps crashing every 2 to 3 mins
help!!Hi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian
Maybe you are looking for
-
Hi everyone, I've been banging my head against this for a while and hope someone can help me. Running Windows Server 2008 R2 Standard with Service Pack 1. When I try to add the Active Directory Domain Services role to the server it gets to about 90%
-
HT201272 i have download 120 mb size (uno card game) on my laptop how can i get it on my iphone s4
i have download 120 mb size (uno card game) on my laptop how can i get it on my iphone s4
-
Powaur - an AUR helper with a pacman-like interface
Hi guys, I've just written this minimalistic AUR helper called powaur, with an interface like pacman / yaourt, so there's no need to learn an addition set of commands. C is the only language I'm really really comfortable with, so powaur is written in
-
Open Hub - Fixed Length KF With Appended 0 and only 10 Char
Hi- I have a requirement to create a fixed length file following the layout below and I am unable to get the KF (LFE-AMOUNT) correct. The Open Hub destination takes on the length of the object which in this case for key figure (0AMOUNT) is 17 (15 w/
-
Hi, I have been trying to use Test driven development and work back from test cases. So far I have these test cases: package poly; import static org.junit.Assert.*; import org.junit.Test; public class ConEqTest { private int min = Integer.MIN_VA