Firefox 3.6.13 upgrade prints only a small section of a web page on each printed page
Firefox prints as though the left, right, and bottom margins are very large, so that printing occurs in a small rectangle (1" wide x 3" high) centered toward the top of the page. The print preview shows the same small rectangle of text except that it is located at the left of the screen instead of centered. The result is that many paper pages are printed for each web page (e.g., 15 pages to print http://meyerweb.com/eric/articles/webrev/200001/example3.html whereas IE8 prints this in 2 pages). This occurs for all web pages that I have tried to print and is not isolated to a particular web site.
In the print setup, all margins are set to 0.5". I have tried resetting these but it didn't help.
When I do Ctrl+P from within Firefox and then select Properties for the HL-1440 printer driver, the paper size is A4 which gives the printing problem. Changing the paper size to Letter from within Firefox still gives the same problem.
Correction from previous post: Before printing with the LaserJet 4 printer driver (while the HL-1440 driver is still the default), the print-preview shows the small rectangle of text (see the image of my previous post). However, once I print using the LaserJet 4 driver (which prints correctly) then any subsequent print-preview while using the LaserJet 4 driver correctly displays the page (full width and height). Hence, there seems to be some conflict between this version of Firefox and the factory HL-1440 driver.
Note: All printing is done to the same physical printer (Brother HL-1440). In all cases the printer properties are set to Portrait and Shrink-to-fit.
Similar Messages
-
How do I print only a small section of a very large spreadsheet
I need to print only the first 15 colums and 240 rows of a huge spreadsheet in Numbers '09. Any ideas on how to do this?
thank you for any assistance.Method 1. Hide the columns beyond the 15th and all the rows beyond the 240th. Then Print.
Method 2. Select and Copy the range you want to print. Insert a new Sheet, and delete the default blank talble in the new sheet. Edit > Paste Values onto the new sheet. Print the new Sheet.
Method 3. Select and Copy the range you want to print. Switch to Preview.app. Command-N, Command-P.
Jerry -
Please, I need help! Working on a MacPro 2.5 GHx, Intel Core 2 Duo, running snow leopard 10.6.7 --
Last week, Firefox asked me to upgrade, that’s when my troubles began -- Now when open Firefox, I get my default page, and then it freezes, disallows any page changes, the links die, no page scrolling --
The only unusual aspect to my previous Firefox configuration, was that I installed a NO SCRIPT thing to get past the New York Times paywall — and I don’t understand how to un-install that, assuming that’s the issue --
Have downloaded and re-installed Firefox, don’t think this has helped in any way, HELP please?!? Thanks, george.That would at least partially explain it.
These MacBook Pros drew more power than the power brick could readily supply, and so would only run at top speed when the power brick was supplemented by the battery.
Though the applicable tech note has been removed, it stated:
"If the battery is removed from a MacBook or MacBook Pro, the computer will automatically reduce the processor speed. This prevents the computer from shutting down if it demands more power than the A/C adapter alone can provide." -
Can't seem to render only a small section of film
Dear All,
I've been trying to finish a film which is made up of still images, audio and (the only effects) dissolves. When, having made an adjustment to an image, I try to render just that small section, there seems to be no change. My timeline is still marked with a green 'unrendered' line. I've tried highlighting the two relevant shots and then rendering them, but no dice. I looked on the forum, and I quote your excellent Tom Wolsky:
"You can render a part of the timeline by making sure nothing is selected in the timeline and marking In and Out points"
I've tried that too. Still no luck. For the record, the command I'm using is "Cmd-R" rather than "Alt-R", which renders the entire file. But the latter seems to be my only recourse, and takes at least an hour each time! Surely I'm getting something wrong ...
Look forward to your help!
RogerThanks, Tom. Your speedy and clear response is much appreciated.
I've just taken your first suggestion (checked the green bar in Sequence-Render Selection) and it seems to be working - but the progress bar still tells me that it's going to take around 20 minutes. Is this reasonable? Or do I have further difficulties? When I've tried to play the sequence without rendering it's got stuck, and a dialog has told me that 'one or more frames were dropped during playback'. I've tried keeping RT playback to 'safe' etc., but this situation doesn't seem quite the optimum. Am I still missing something?
Thanks again,
Roger -
White page after each printed one....(SOLVED)
Hi ,
I have developed a report using Dev10g Rep.
After each printed page(even in previewer) a white page is printed.....
What should i check......
Many thanks,
Simyou can see my question and self-response in the following thread...
How to delete pages in Report layout
maybe that will help. -
Printer suddenly produces only blank sheets of paper when print job is set via desktop. HP Solution Center indicates ink levels ok. Printed a diagnostic page ok.
I have done all the diagnostics, alignment and cleaning, but it still will not print a test page. The page printed during alignment uses mostly blue colors. I tried printing an email and it printed every line or item that was blue on the original. All rest was blank. I have downloaded all recent fixes and drivers for Solution Center and printer.
-
How do you print only the first ten rows in a table?
Hi everyone:
I am trying to print only the first ten records by using <?for-each: <group name>?> and <?end for-each?>. Is there any stop tag that I could use to stop printing after the printing the first ten records without modify the XML data file? I am using XMLP Desktop 5.6.2. Thanks for your help!You are right kkretser. However, if your report have 2 or more layouts pages. You may want to output the necessary records to each page like the first 10 records to the first page the next the to the second page. Like you said I figure out now that you can use <?if:position()<10?> print out the rows and then on the second page layout, you can do <?if:position()>=10?>. Thanks to all of your replys, guys!
-
HI,
I have an HP LaserJet CM415fnw.
I would like to print only with the black cartridge even if I want to print from a phone or tablet, or for anyone that wants to use the printer and doesn't know how to set up the printer to print only in black.
Thank you.PrintnShare will work with 3G/4G
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/f4277cd6a23630c765c 3156e3efb2a63.jpg
http://itunes.apple.com/sg/app/print-n-share-for-documents/id301656026?mt=8&ls=1 -
How do I print only the text on the monitor screen?
I would like to be able to print only that portion of a text that is on the monitor screen. How do I do that?
I have an Epson Workforce 325 printer, and an HP desktop computer PCPlease see the following to print only the text portion of the web page. I am assuming you wish to print just the text & not the ads or additional irrelevant items to avoid wasting ink.
See:
[[Printing a web page]]
'''If this solved your issue, please select ''solved ''& chose the appropriate ''solution'' to close this ticket/question posting'''. -
How do I get my printer to print only on one side of the paper?
I want to print only on one side of the papger. But machine prints out on both sides. When I remove the duplexer at back of machine, the paper flies out the back and printing error says no paper. I'm going nuts. I am a writer and can only submit material on one side of the paper. I just got this machine and hate that it has no manual and the manual on line is beyond me. I need simple easy to understand instructions for my simple brain. thanks
Hi,
Follow these steps to disable two sided printing:
Open the file you would like to print. From the File menu select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
Click the settings drop down, it will usually appear as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings as a preset by clicking Presets > Save Current Settings as Preset...
By doing so and completing the print job these settings will remain default till another preset will be used in the future.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How to remove unnecessary data and print only the required data in JSP
Hi all
The following output is from TCP/IP connection of RFID Reader.
Connected to: /192.168.0.3
EVT:DCE DCEVERSION 3.2.0.0
EVT:DCE READER IM5 RFID Reader Ver 3.29
EVT:DCE READERINFO Basic Reader Interface Version Q
EVT:DCE READERINFO FCC 915Mhz
EVT:DCE READERINFO Copyright (C) 2002-2006 Intermec Technologies Corp.
EVT:DCE FIXEDATTRIB CHKSUM=OFF
EVT:DCE FIXEDATTRIB TTY=OFF
EVT:DCE FIXEDATTRIB ECHO=OFF
OK>
EVT:TAG H02000031323334000151E62B 1 1
EVT:TAG H02000031323334000151B775 1 1
For my JSP case I have converted above output's program in javabean I want to print only tagID and other values in a table in my JSP page. Could anybody let me know how to ignore the unnecessary data and print only values after EVT:TAG in three columns and rows, besically rows are not fixed because it depends on reader how many tags it detects?
Thanx
kvijaiHi,
Try this
private function doFilter(item:Object):Boolean
var searchString:String = myTextIp.text.toLowerCase();
if (item.name.search(searchString) == 0)
return true;
else
return false -
HP 576dw printer prints only part of document
A multipage document is sent to printer, Word or PDF. The printer prints only part of the document. For example, in an 80 page document being printed double sided, only 56 pages actually print.
HP print software indicates no new updates are available.Hello pchancel,
Welcome to the HP Forums.
I see that you are having some printing issues when printing documents.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Placing session variable on bottom of each printed page
I have an application that contains a page in which we use as
a printed report. We plan to convert this someday to a crystal
report but for now are only option is to use the web browser as our
reporting page.
What I need is to know is if there is a way to code the page
so that the report id, which is stored as a session variable can be
printed out on either the top or bottom of each new page. The
report contains a lot of narrative, so it is impossible to tell
where the new page is going to begin and end because the length of
the narrative varies from 1 to 10 pages.
I don’t know if there is anyway to incorporate the page
setup from the browser settings, we are a state government, and we
are only using Internet Explorer 6.0 as our browser. The
application is using CF MX 7.
Any ideas??
Thanks.I think I misunderstood. You have one long report and when
printed will be multiple pages. You need the report name to be on
each page.
Three ways I can think of to do it.
First you can use the <title></title> to your
advantage. When printing from a browser the title is at the top of
each page. (though this can be turned off under browser options but
is on by default if I remember correctly).
<head>
<cfset report_name = "Dynamic Report Name">
<title><cfoutput>#report_name#</cfoutput></title>
</head>
Second, you can make the report name part of the URL so it
will appear at the bottom of each page.(this can be turned off too
in browsers)
www.mysite.com/reports/rpt_gen.cfm?REPORT_NAME=AGENT_MULDER_EXPENSE_REPORT_2005
Third, use an image as a watermark. You should probably make
the image 1/2 the height of the printed page. The background image
repeats. That way, you are sure it will appear somewhere on each
page printed. Width is another problem. But you may be able to
center the background image horizontally using css.
<body BACKGROUND="images/report_proof_background.jpg" >
* You might also want to check out using css with page
breaks. -
Banner page on windows print server messes up cifs printing
Hey;
We're a small Mac population in a HUGE corporate environment. We're using Mac OSX 10.5 and Admit Mac to bind to AD. We set up printers through AD to print through windows print servers which works beautifully- unless the Print Server is set to produce a banner page with each print- then we get the banner page, a page of garbage and 20 blank pages. I can't request banner page be turned off for all printers we need access to. Has anyone experienced this? Found a work around? Know of a way to stop the banner page for Mac only prints?
We're setting the printer up with this command (for example): lpadmin -p printername -E -v smb://printserver.ou.domain.net/printername -P /Library/Printers/PPDs/Contents/Resources/HP\ Color\ LaserJet\ 5550.gz
I notice in the ipadmin man page there are commands for banner pages-
-o job-sheets-default=banner
-o job-sheets-default=banner,banner
Sets the default banner page(s) to use for print jobs.
Is there a setting to not print banner pages on the client side?I am not sure if these links will help, but there is a problem with the lp command in Leopard:
http://discussions.apple.com/thread.jspa?messageID=7128688�
http://discussions.apple.com/thread.jspa?messageID=6919636� -
Wireless printing from a PowerBook G4 through a router to an hp printer
I'm able to hook the usb cable directly to the printer from the powerbook and it prints great.
My hubby and I ran through the mac book and was able to to connect the mac to the router and then at some point it printed, but it was computer language... what could we be missing?
Oh (since this was a while back after giving up) I remember when selecting the printer model we were not given the choice to load a driver...so I'm thinking there lays the problem... however... we went to the website to even download the driver (since this mac should already have the driver preloaded from what I remember reading).... i have no idea if a CD came with it, it we found one and tried there or what... it's been that long since we tried... but then again, I had lunch yesterday and I can't remember what I ate?
Anyone want to try and help? There's a reason why I've got my user name as conehead. wink
chelle
I would like to try this again. Thanks for anything you can give. I've gone through several pages of posts and didn't see anything that could help so now I'm posting my much needed help.Network printing/Windows printing only works with a driver that was meant for network printing. To use the OS X built-in CUPS network choices, you need a CUPS driver. For postscript printers, this is not an issue, because postscript is the native output of OS X, and can easily be routed to the various choices in Printer Setup.
Non-postscript printers are Very Different. Except for Brother, no manufacturer has provided CUPS drivers. Instead, what you get are Carbon-type, OS9 legacy drivers, that have the comm protocol written into the driver (mostly USB). They can only print via local connection.
**Exception - when printing via an Airport/Bonjour enabled print server (Airport Express/Extreme), where the software does a port redirection, USB output from the Mac gets routed to the USB port on Airport Express/Extreme.
Short version - the driver provided by HP doesn't do network/windows printing.
Install hpijs + ESP ghostscript from:
http://www.linuxprinting.org/macosx/hpijs/
Then follow this guide:
http://www.ifelix.co.uk/tech/3015.html
Maybe you are looking for
-
401 - Unauthorized error while connecting to userprofile web service in InfoPath 2010
Hello, I have 2wfe (NLB), 2app, 1db farm. Everything is working fine except for one computer! I have several InfoPath forms, they have custom webservices and userprofile web service. They work without any problem, but there is one computer that gives
-
Dear Expert, Is there report asset that shown Depretiation value, book value, and Purchase Order Value ? Example, our depretiation use IDR but n PO Asset we use USD. Rgds, Iwan Siahaan
-
Dynamic Text preparation for Command button in ADF (Tr component)
We have one command link and our requirement is to preapre the command button text dynamicaly .? Details are givin below : I need to get the button text value form the UCMS file based on the dynamic preparation . The key value of UCMS is "setupfamily
-
Good day, After I have installed Adope Reader on my Computer, I am still struggeling to open a PDF file on SARS efiling. Why is this happening?
-
this morning... my computer ran out of battery... so it died. I hook it up to a power source and then my ichat starts up likes it's the first time... with the 'welcome to ichat' ... so i click continue and my buddy list pops up and everything looks f