Firefox 3.6.13 would not load under xp on acer computer. deleted in and downloaded version 4, but still does not load, just hangs system. what is wrong?
a couple weeks ago, firefox stopped loading (just hung system) on my acer computer running windows xp. I deleted firefox and downloaded versin 4.0.1. But, the same thing is happening. it starts to load but then stops responding and hangs the system. what is wrong?
I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.
Similar Messages
-
If anyone can help I would appreciate it. Mail on my iphone will not send any messages. I have followed the Apple instructions and still it won't work, even after resetting my iphone. My email provider is BT.
To Avoid Relaying:
If you are sending an email from, say, [email protected], but the return address is [email protected], that is relaying (you are using y.com's servers to send an email where the email "originates" from b.com). Many servers don't allow relaying to prevent spamming.
To make this work go into the email account settings, tap the account "button" that has your email address, go to the Advanced section in "Mail" if there is one, then go to "Outgoing Mail Server", tap it, and then tap "Primary Server", and in the Outgoing Mail Server enter your user name and password. It may say optional, but you need this.
Not all services provide this and the sequence of buttons I describe above may not be exactly the same for each address (look around if different). If you can't set the user name and password, then that email service does not provide a way to get around relaying. -
I try to download flash, the computer says that the download was succussful but it does not download
I try to download flash the computer says it sucessfully downloaded but it did not
Hello,
Welcome to Adobe Forums.
You can download Offline Flash Player Installer from this document : http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Vikram -
I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
I am trying to open some *.avi files in quicktime, they are from my security camera at home. It will not open them, would anyone be able to help me? It says I need a plugin but it does not tell me which one.
Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis. -
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys -
Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied any one has a solution?? please...
Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.
It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.
-
I delete an email on my iphone but it does not delete the same email on my laptop. Any suggestions to help?
Yes, There are actually 4 calendars listed under my iCloud account. The listing on my iPhone is exactly like the listing on my iPad. The iPad is updating but not the iPhone. It's odd because the iPhone did work at one time so I'm assuming it some setting I've changed. I have checked and double checked that the settings on both devices are the same. Do you have any other ideas?
Thanks for your help. -
.its not at all startning and not giving any kind of error msg, and i restared pc many times and uninstall and installed many times, but still its not opening
Also, if you downloaded earlier in the week, make sure you have the 37.0.1 updated that was released on Friday (I think).
If needed, I suggest installing a slightly different way the next time:
'''Clean Reinstall'''
We use this name, but it's not about removing your settings, it's about making sure the program files are clean. As described below, this process does not disturb your existing settings. Do NOT uninstall Firefox, that's not needed.
(1) Download a fresh installer for Firefox 37.0.1 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox (if applicable).
(3) Rename the program folder
''(64-bit Windows folder names)''
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
''(32-bit Windows folder names)''
C:\Program Files\Mozilla Firefox
to
C:\Program Files\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
Any difference?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* \OldFirefox\Plugins
* \OldFirefox\browser\plugins -
HT201412 ipad screen will not slide. Tried resetting and a factory reset but still will not work.
ipad screen will not slide. Tried resetting and a factory reset but still will not work.
I have the same issue on my Ipad Air. Screen will not rotate, I have reset the settings, still only displays in the portrait mode. A couple of interesting things though. a couple of days before it completely locked up into portrait I would have to turn the ipad off and hold it in the orientation I wanted because it would not change orientation after I was in an app.
Also, I just played a Netflix video and it was in landscape mode.
Any ideas?
Thanks, -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help
http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without. -
my iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off can anyone please help ......
hi i m currently in pakistan and there is no apple store here . i will b back to australia after 2 weeks i was wondering if thei can b any fix as i have all my contacts and everything else in my mobile
-
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
I have tried to delete a book from my bookshelf but it does not go away
I have tried to delete a book from my bookshelf but it does not go away.
Settings-iBooks-show all purchases=off?
Maybe you are looking for
-
HP Office jet pro scanning size issue
I have a HP Officejet Pro 8500 When scanning to my computer to a .pdf it always results in an 8.5x14 document not an 8.5x11 document (and this happens regardless of whether I scan a book page with the scanning lid open or an 8.5x11 single page origin
-
Hi folks, Lenovo is pretty innovative stuff, I think we can all agree As the Thinkpad is "inspired by customers", let's see if we could try and inspire Lenovo's system builders for the next generation of Thinkstation's to come, no doubt pretty soon g
-
Hi, I'm currently using Eclipse and JCOP plugin for applet development, and I'm looking for solutions on how to share custom libraries between applets. I'm particularly not looking for interface sharing between applets, but more how to organize the s
-
Fnd_profile.save for setting APPS_FRAMEWORK_AGENT on server level
Hi, i can set APPS_FRAMEWORK_AGENT on user level using " result := fnd_profile.save('APPS_FRAMEWORK_AGENT',URL,'USER',usr.user_id); " but this "result := fnd_profile.save('APPS_FRAMEWORK_AGENT',URL,'SERVER',Node_id); " does not work for setting it o
-
hello, i'm using tomcat 3.1 and i have a problem to run my servlet. I have a jsp called MyPage.jsp in this jsp page i have the following line of code: <FORM METHOD="post" ACTION="servlet/package1.MyServlet1"> in tomcat this is my Structure: jakarta-t