Firefox 3.6 takes several minutes to load under windows 7 ultimate 64 bit

Firefox was working fine on windows 7 x64. Then I loaded some shell extensions to allow symmmbolic links to fies as my SSD was filling up and I wanted to move some applcation data off the system drive. This caused problems with acronis backup so I unloaded the extensions and reinstalled acronis. Not everything works as before except that firefox takes 3 minutes to load. When initiated it shows up in the processes on process explorer as running but doesn't show up as an applicationrunning for three minutes or so.
Have tried unlintstalling and reinstalling firefox, allowing it through my firewall and using the prefetch option in the shortcut without success.

Yeah i have done that a couple of times. When i navigate through the disk it doesn't even let me run setup.exe, so i installed from bootcamp64.msi. Then after 3.0 installs, i try to update to 3.1 and after the nvidia install, it just quits. When i use my version tracker it says that boot camp is in version 3.0, and it shows an update for 3.1 in software update. Now when i go to uninstall programs, it shows boot camp 3.1 is installed.
As far as the audio, i have tried that as well. If i manually put a driver into that device, it fails on every reboot. It only shows working on Microsoft High Deff Audio Drivers( and it actually dosnt even work, it just glows red on my head phone jack.)
Im stumped.

Similar Messages

  • Firefox takes several minutes to load

    It takes several minutes for Firefox to load every time I log in. Takes longer if computer is started. Have troubleshot everything I could find with no avail. It's getting old and all that I have read I can't believe Mozilla has not heard and fixed this problem.
    == This happened ==
    Every time Firefox opened
    == I think it was when I updated.

    The question certainly isn't solved. I have no trouble with speed when entering sites - it's just when first trying to enter Mozilla. I tried IE this morning as a test and was into the home page in a few secomds. Moxilla 8 takes about a minute and a half. Version 3.6 loads immediately. I previously tried vers 8 a couple of weeks ago and web sites took a long time to load. This was not a problem after using vers 3.6 for a while and then re-downloading vers 8. I am still frustrated by the slow load up time it takes to get to the home page and believe this may be something the system administrators need to fix..

  • Suddenly FF has started to take several minutes to load from the Icon. Thunderbird still loads instantly. I am using Microsoft OS

    I use Vista Microsoft OS and have FF and Thunderbird icons installed. Over the last through weeks the FF Icon has often taken several minutes to load the front page. Thunderbird still loads fairly much instantly.
    The problems became more noticeable following a recent MS upgrade

    Have Windows Updates been applied? See my note about this
    https://twitter.com/imorrish/status/491020435039854592
    Look at the URL in the search results. It may have invalid character in which case you can use this fix
    http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
    Regards,
    Ian
    http://sps.cloudapp.net
    Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites

  • Start up takes several minutes to load, need to correct the problem?

    Product # VM222UA#ABA
    Windows 7
    No error message
    No changes made to computer

    Test the hard drive and memory modules, post back any errors
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&la...

  • How can I resolve an issue where webpages take several minutes to download? Other computers working on the same home network take not time at all.

    Firefox would not load webpage despite there being an active internet connection to the computer. I know this because firefox loaded on another home computer without any issues. I reset the ip address on the computer in question through cmd.exe and this helped the issue to an extent however it take several minutes to load webpages. I can also advise tha Internet Explorer suffered exactly the same issue and it gave me an error message early when unable to load webpages, that a remote firewall may be blocking the connection. It suggested to configure the firewall to allow connections thru TCP port 80.

    Hello ,
    Can you please post your ADSL stats by following this direct link; http://192.168.1.254/index.cgi?active_page=9116 << it only works if you have a Home Hub 2.0+ and remember to type your password in.
    Also we need a speedtest Use this link http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 as it will also help you diagnose and give you a list of solutions afterwards, it does incorporate the http://www.speedtester.bt.com one though as well.
    It sounds to me that you have a low profile, with your stats we can see if you've been having disconnections which makes the exchange raise your Noise Margin to try and increase your stabibility, but at a cost of speed, it may have been that your sync speed has recovereed, but not your IP Profile.
    Here are some helpful (I actually did find them helpful!) tips from BT: http://bt.custhelp.com/app/answers/detail/a_id/35079 up to you whether you want to read those tips, because I did actually find them helpful.  
    Can you comfirm that you have no noise on the line.  Really a test by dialling 17070 and pressing option 2 for the quiet line test should be completed in the Master Socket with no other devices connected to the line.  ANd also do you have a master socket with a split faceplate that you can unscrew the bottom half, if so behind there is a hidden 'test socket', it disconnects all your internal wiring so just to make sure its not a fault inside your premises.
    Regards Edd
    Check your Line
    BT Speedtester

  • In Windows Vista 7, SP2, Firefox takes several minutes to launch, is non-responsive, hangs sometimes launches additional windows without my clicking. I get error code 10003.

    I'm using Firefox 6.0.2 in Wndows Vista 7, SP2. I'm using Norman Security Suite anti-virus software. Firefox behaves erratically. Sometimes it takes several minutes to launch. If I launch an new window it sometimes hangs. It launches two extra windows without my having clicked to launch. Always two. I get an error code 10003 but when I search for this I get no information about it.
    Windows Task Manager shows plugin-container for Firefox running in addition to firefox.exe.

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Restore the default home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Check and tell if its working.

  • Javascript (in Firefox 3) takes several minutes to start working when computer wakes from sleep, Mac OSX 10.5.8

    Whenever I wake my Mac from sleep, with Firefox having been left running, some parts of Firefox take several minutes to start working again. These include switching between open tabs and any website functionality that uses javascript, eg gmail. This has gone on through many updates of Firefox. If I quit Firefox immediately on waking the Mac and restart it, everything is OK.

    The following worked for me:
    http://support.mozilla.com/en-US/questions/684867
    "Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
    Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
    I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

  • Firefox used to load igoogle in 15 seconds; now it takes TEN minutes to load. HELP

    Firefox used to load my iGoogle page in 15 seconds; now it takes TEN minutes to load this page. Help

    Its not only iGoogle, But 99% sites open up pretty slow with Firefox 3.6.*. When you first hit the site, it half loads and then slowly loads remaining , sometimes take 5-10 Minutes, and sometimes it never loads or you have to hit enter again to fully load the site. Firefox 3.6.* is disgusting...Please this is serious. I recommend users to switch back to 3.510; its the most stable one.

  • When I rent a movie using Apple TV, it takes several hours to load and then I select watch later. When I go to my rented movies and try to watch it , it starts loading all over again. This can't be normal. Is there something that I am doing wrong?

    When I rent a movie using Apple TV,it takes several hours to load. At this point, I opt to watch later. When I try to watch the movie, it starts loading again and tells me that it will be ready to watch in one hour forty four minutes. This can't be normal. Is there something I am doing wrong? Any suggestions.

    If it's taking several hours then that is likely due to your internet connection. You can verify at speedtest.net
    6mbps required for instant 720P
    8mbps for 1080P
    You can switch to SD in the settings (which only requires 3mbps)
    You can also check istumbler or netstumbler for interference
    Make sure you are on your ISPs DNS
    The reloading is normal. There is no accessible storage on ATV. The small flash is used for caching streamed content, if you access other things or turn the device off it will be flushed.

  • Problen pening FIRST email when opening Gmail. Takes few minutes to load.

    Updated to new firefox as I had problem when I tried to "open a new tab". After installing update I now have problem opening FIRST email when opening Gmail. Takes few minutes to load. After the first one, then all the others open instantly w/no problems. I have not noticed other problems on computer.

    No problems here, so no fix required.

  • Opening Excel 2010 files from Explorer takes several minutes

    I am running Excel 2010 on Windows 7. For the last year I have had no problems, but today I find that if I try to open any file from Windows Explorer (e.g. by double-clicking it), or from an item pinned to the Task Bar, it takes several minutes to open Excel.
    If I open Excel directly it opens very quickly. I can also open any of the "problem" files in an instant when Excel is open (e.g. from the Recent Files list or from  the File...Open dialog). All of the files in question are on the local hard
    disk.
    I don't have this problem with MS-Word.
    I saw another post here which recommended unchecking the "Ignore
    other applications that use Dynamic Data Exchange (DDE)" option, but I didn't have this option set in the first place.
    Does anyone have any other suggestions for fixing this?

    Double click an excel file, when the excel loading window appears, start Task Manager, terminate the excel process, then re-open the excel file to test if this issue goes away.
    Also someone resolved this issue by installing an add-in. Have a try.
    File->options->Add-ins->Select "Excel Add-Ins" in Manage list box and click button "Go..." ->Tick the add-ins that you want and click button "OK" 
    http://excel2007-slow-open-file.blogspot.in/

  • Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it

    Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it is frozen.  I have tried rebooting the computer and it works for a few minutes then gets stuck.

    Which model iMac do you have?
    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    OS X (10.6.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • T430s Takes Several Minutes to Shut Down

    Hey all,
    I've got a T430s running Windows 8.1. The machine runs great and boots very fast (probably helps that I bought an SSD); however, when I shut down, it takes several minutes (5+ minutes) to fully power-down. The screen goes black, but USB devices continue to have power and the fan still spins until finally it powers down. The same issue happens when I close the lid and put the machine to sleep.
    Before anyone blames Windows 8.1: This didn't happen right after I upgraded to 8.1. It seemed to start several days after the 8 --> 8.1 upgrade, and I'm not sure what variable changed to cause this.
    Any ideas? Thanks!

    Nothing in either the System or Application logs that would indicate that there were any problems shutting down. I can see where User32 indicates that the "power off" shutdown has been initiated, then about 5 more log entries in System after that, all of which appear to be normal (i.e. related to services shutting down). The time on these records are all within a few seconds of each-other. I don't see any outliers that are a few minutes out (i.e. things logged several minutes after the shutdown).
    One thing I did just notice is that I see the following Critical notice from Kernel-Power after booting up from shutting down:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    So it's not even going down cleanly. But I still have no idea what the offending driver/service/app is.

  • Firefox 4.0 takes 5 minutes to open and another 5 minutes to close. Internet explorer takes a few seconds on same laptop. WHY???

    To open and close Firefox 4.0 takes 5 minutes. Internet Explorer on the same system takes only a few seconds. Can you tell me why the major difference in time?

    You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
    I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
    You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
    Did you try my suggestion of installing portable ESR ?
    For forum cross referencing purposes
    * Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
    *(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
    * Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
    *I note this was first seen in Fx21 and is 100% Windows 7
    <br />

Maybe you are looking for

  • GROUP BY on a table with geometry

    Good evening This is an overview of my table Geometry_|_ID_GEO_|_Year_|_Value Polygon1_|__1______|_1999_|__5 Polygon1_|__1______|_1999_|__7 Polygon2_|__2______|_1999_|__4 Polygon2_|__2______|_1999_|__12 I would like to group this table by geometry an

  • XML validation-Schematron

    Hi All, I validated a XML document using Schematron validation, but its not throwing  any errors if there is any mismatch between source document and validation document. Source Structure: OrderStats     1    Order          1...unbounded      id     

  • Stop A Loader From Loading?

    I am creating an image gallery where the user can select from several thumbnail images. Once selected, the thumbnails will enlarge and load the full sized image. My problem is that while the user is waiting for the full sized image to load, he may de

  • Is there a digital notepad that works with the ipad

    i got my ipad 2 recently but i dont like writing notes on it. i was looking for a digital notepad that you write on paper and it shows up on ipad just like a normal note. ive found the notepads, but i cant find one that works with ipad. please help

  • Cisco tacacs 5.4 for centos machines

    Hello Everyone, I am a newbie. I have cisco TACACS 5.4 server installed. I have few centos machines on my network and I want to use TACACS server to authenticate credentials for centos machines. There are two types of users on my machines 1) admin 2)