Firefox 30 will not launch the ICA Application when using Citrix receiver 4

When trying to launch a Citrix Application with Firefox version 30 it will not launch.
There is no error message appears.
If, you change back to Firefox 29 all works without issues.
How can you get the new version to work Citrix Applciations and Citrix receiver 4.1

The fix for me was to update to the latest version of Citrix Receiver (4.1.0.56461) and then change the plugin settings for Citrix in the about:addons sections from "ask to activate" to "always activate". All working again for me now :)

Similar Messages

  • My system needs internet explorer for a application I need to down load, however I need to down load the latest yahoo tool bar for internet explorer to work properly and firefox will not allow the down load of yahoo toolbar. How do I fix this?

    I have not used Internet explorer since downloading firefox and I need IE for a trading platform that I need to use. In order to get IE working I apparently need to down load the latest version of Yahoo toolbar, however when I try to down load the tool bar Firefox will not allow the down load of that file.

    Thank you so much, for once in my computer life I knew what the problem was, what caused it, why it was caused, what it did, what it made it do and most importantly how to fix it and to do it correctly and expeditiously. I can not Thank You all enough for all of the help! I also have Pogo mailed this to all on my friends list, where they have all learned as I have and have fixed theirs also. and the message is being spread. Thank You again, I just can not say it enough.

  • Firefox will not launch, but shows in task manager, after updating graphics drivers to AMD's 13.1.

    Hi,
    After updating to the AMD 13.1 drivers, on my 5770, Firefox will not launch; it does, however, show in the task manager. I should note that it will start in Windows safe mode; when I had it open in safe mode, I used that time to disable all plugins, add-ons, extensions, and created a new profile. This did not help. I also tried launching Firefox in to its safe mode, and had no luck with this either.
    I experienced this problem once before, when trying to update to a previous version. I believe I was moving from 12.1 to 12.4, but I'm not 100% sure of that. Ultimately, my solution then was to retrograde back to my previous driver. The steps mentioned in the previous paragraph did not help at that time, not did a complete reinstall.
    15 years of computer repair experience, and this has me baffled.
    Thank you to anyone who might be able to help.
    Possibly relevant specs.
    Windows 7 Ultimate x64
    AMD Phenom II x4
    6BG Ram
    AMD 5770 graphics, running Catalyst 13.1

    By any chance, did you disable Firefox's use of hardware graphics acceleration? To avoid a round-trip through Windows Safe Mode, you could try adding these to your prefs.js file while Firefox is closed.
    To quickly open the folder with the correct prefs.js file, you can use
    Help > Troubleshooting Information > "Show Folder" button
    Because Firefox may overwrite change to this file at shutdown, you should edit it after closing Firefox and allowing a few moments for Firefox to finish updates to the files.
    These are the preferences I think are most relevant:
    user_pref("gfx.content.azure.enabled", false);
    user_pref("gfx.direct2d.disabled", true);
    Does that make any difference?

  • Firefox will not launch

    firefox will not launch after upgrading. Every time I try to launch I am advised to reboot to complete the upgrade.

    I think you already known that latest firefox version 13.0.x don't work with xp sp1, needs sp2 and above.
    Try [https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer Uninstall Firefox from your computer]
    then Download the latest version(with your safari) from :
    http://www.mozilla.org/en-US/firefox/all.html
    and Install the version that you have downloaded (13.0.1).
    Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
    see also for info : [https://support.mozilla.org/en-US/kb/install-firefox-windows Install Firefox on Windows]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Firefox will not launch after latest OS X security update

    Just installed latest Apple software update on Snow Leopard. Now, Firefox will not launch. Checked system logs and get this:
    11/21/10 10:24:20 PM com.apple.launchd.peruser.501[155] ([0x0-0x6d06d].org.mozilla.firefox[802]) Exited with exit code: 1
    The following may or may not be related. Before installing the update, I had lots of these messages in my logs:
    11/21/10 7:27:17 PM firefox-bin[39594] *** __NSAutoreleaseNoPool(): Object 0x1422680 of class __NSCFDate autoreleased with no pool in place - just leaking
    11/21/10 7:27:17 PM [0x0-0x493493].org.mozilla.firefox 2010-11-21 19:27:17.323 firefox-bin[39594:903] *** __NSAutoreleaseNoPool(): Object 0x1422680 of class __NSCFDate autoreleased with no pool in place - just leaking

    Sounds like you may have a check in the box for HTTP and/or HTTPS proxy servers, but you are not behind a proxy server. Safari and Software Update use the HTTP port, Mail doesn't, and Firefox ignores the Mac OS preferences and uses it's own proxy settings.
    Go to System Preferences > Network > active connection > Proxies tab and if there are proxies checked, UNcheck them.
    Hope this helps...

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access.

    Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access

    Which version of Firefox are you using?
    See
    * https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can

  • My University email uses outlook and firefox will not let the page open once i log into the university login. It used to work, but now just shows a completely white tab. My email works fine in other browsers. Why?

    My University email uses outlook and firefox will not let the page open once i log into the university login. It used to work, but now just shows a completely white tab. My email works fine in other browsers. Why?

    Make sure that you haven't left a profiles.ini file.
    * http://kb.mozillazine.org/profiles.ini_file
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Why IPHOTO album will not keep the template format when share to IDVD.

    Why IPHOTO album will not keep the template format when share to IDVD. Also, could be better if IPHOTO Album could access "inspector tool" with ability to change the slide duration time and apply a random "Transitions" to specific slide.

    Are you sharing an album of photos or a slideshow to iDVD?  If it's an album then what you get in iDVD is just a slideshow with the photos in it where you have to set the transition and slide timing unless you add music and select fit to audio.
    Don't know what you mean by the template format unless you're referring to the themes in a slideshow? If you share a slideshow the ss is converted to a Quicktime movie file and that is added to the iDVD menu window.  No changes are possible.
    OT

  • Firefox will not upgrade the company whose firewall I am behind say that UPX files are not allowed where can I download a Non-UPX latest version

    Firefox will not upgrade the company whose firewall I am behind say that UPX files are not allowed where can I download a Non-UPX latest version

    UPX is used to compress the Firefox program.
    It is not possible to un-compress that file without corrupting it.
    Can you use the portable Firefox version?
    *http://portableapps.com/apps/internet/browsers/portable_firefox

  • MAC 0S 10.3 FIREFOX WILL NOT START--THE OLDER VERSION WORKED PERFECTLY-- HOW DO I GET IT FOR MY WIFE'S COMPUTER

    an update was sent to my wife's computer. she tried to use it ,but it would not open. the older version worked fine ,but it was erased by the upgrade. How do we get the old version back? the upgrade--yahoo_firefox_3.6_set_us.dmg-firefox will not open.

    The last version of Firefox that works in OS 10.3 is Firefox 2.0.0.20, you can get it from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/

  • Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

    Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

    If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
    If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
    *Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
    *Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
    See "Import from another browser" and "Import from file":
    *http://kb.mozillazine.org/Import_bookmarks

  • Will not recognize the Lucid LG when connected with USB

    My Dell  will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately.  After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

        That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port.  Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5 
    Keep us posted on any additional information/details about your issue.
    Thanks,
    MikeS_VZW
    Follow us on Twitter @VZWSupport

  • When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

    When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
    I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
            Mockery context = new Mockery();
            final MessageListener messageListener = context.mock(MessageListener.class);
            final Latch latch = new LatchImpl();
            final String prefix = "test" + System.currentTimeMillis();
            context.checking(new Expectations() {
                    oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                    will(new CustomAction("release latch") {
                        @Override
                        public Object invoke(Invocation invocation) throws Throwable {
                            latch.unlatch();
                            return null;
            final Connection connection = createConnection(null, null);
            Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
            connection.start();
            Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
            Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
            final MessageConsumer consumer = session.createConsumer(wildcardTopic);
            consumer.setMessageListener(messageListener);
            MessageProducer producer = session.createProducer(null);
            producer.send(destination, session.createTextMessage("MSG1"));
            latch.await(5000);
            connection.close();
            Thread.sleep(5);
            context.assertIsSatisfied();

    Check where your MDB sends the [response] messages to.

  • USB mouse will not initialise on boot-up when used via Dynadock on Satellite Pro U200

    The USB mouse will not initialize on boot-up when used via Dynadock on Satellite Pro U200. If the mouse is reseated on the Dynadock it works fine. I am using a Kensington Valuoptical USB mouse. I have tried alternative kensington mouse and had the same problem. Can anyone advise how to resolve this issue?

    Hi Jeremy
    Unfortunately I have no solution for your issue but it can also be some technical limitation. I am also interesting to buy such docking station and I would like to know if there is the same problem with external HDD or USB memory sticks.

Maybe you are looking for