Firefox 33 update - mouse speed very slow

After updating to Firefox v 33.0.1 the speed of the mouse became very sluggish and moves very slowly inside the browser and is constantly getting stuck on various elements on the page.
Version 32 was fine. Can you please fix this?
I am running Windows XP.
Thanks.

That solved the problem! Thank you very much Philipp! :-)

Similar Messages

10.6.4 update - upload speed very slow

After update to 10.6.4 on iMac 24" (MB325LL/A) upload to internet is very slow.
Usually download speed and upload speed 10500 Kbit/s, now download 1500 Kbit/s, upload 2500 Kbit/s.
On MacBook (Early 2009) all ok.

sorry, now download 10500 Kbit/s, upload 2500 Kbit/s

Mac os x lion 10.7 on mac book pro not updating and running very slow

i am using mac os x lion 10.7
problem it is not updating and running very slow. How to improve?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type nothing in the Terminal window except your login password if and when prompted.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window. You don't have to copy the output; just paste into your web browser.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

IOS7 wifi and LTE speed very slow.

iOS7 wifi and LTE speed very slow compared to iOS6. This was proven with Safari and using speed test app.

I have exactly the same problem symptom ever since installing iOS7. Toggling the FaceTime or the LTE settings alleviated the problem until I installed the latest version on IOS (7.0.4- 11B554a). Now the bug is permanent, a Network Reset will not work anymore, a System Reset will work only for the first execution of Speedtest.
Looks like the network software is throttling LTE speed to the minimum (.50 Mbps) up/download speed no matter what. Now unlimited Data means nothing, maybe AT&T wants me to go to Verizon or Tmobile.
I reported this problem to AT&T Sept 26 when I first installed IOS7, they told me there was no problem really that I needed to wait for the LTE network congestion to go away...? Since I found a circumvention by toggling LTE I did not pursued the problem...
After reporting the problem again this morning, they sent me to the AT&T store to change the SIM card.... I will try this and report back if it fixes the problem... Although I doubt it will fix anything but burn and extra hour of my day. The AT&T rep said that if the new SIM card doesn't fix the problem I need to go to Apple for them to give me a new Iphone....???? I guess there are many iPhones gone bad after installing IOS7 (sarcasm).
If you have this same problem, please post here so that I am able to get back to AT&T with some leverage to get them to remove the choking of LTE. Basically, if everyone accepts the new low speeds, then, unlimited data is no longer a problem for this phone company.

How do I speed up firefox. It loads very slow compaired to others

Firefox is very slow to load and slow bringing up web sites. I have cleared all stored items, still very slow
== This happened ==
Every time Firefox opened
== After using the program for several months

You can speed up Firefox by tweaking some of the '''about:config''' settings from within Firefox. Here is the [http://www.ehow.com/how_2033391_enable-pipelining-firefox.html link]

Mac App Store download speed very slow...

I have been trying to download the App Store updates OS X Update 10.10.3 and OS X Yosemite Recovery Update to my iMac for the past several days. When opening the Mac App Store, I click on updates and they appear. However, when I select 'download' my download speed slows to the point of less than 1 MB per minute.
I seem to remember this happening when Yosemite was first released, but after a few days, I had no problem downloading Yosemite from the App Store.
This only occurs when trying to download from the Mac App Store. When I download iOS App updates to iTunes I do not have the same problem so it seems to be only affecting the Mac App Store.
My internet speed is fine. I can download fine from other websites, just not the Mac App Store.
After searching online, I found one solution that looked promising:
Finder->Applications->Utilities->Keychain Access->Preferences->Certificates->Certificate Revocation List- Changed from Best attempt to OFF.
Unfortunately for me this had no effect so I changed the setting back.
I then looked for a way I could download the files from outside the Mac App Store & found this:
Apple - Support - Downloads
When downloading from Apple Support downloads page, my downloads were very fast. The Yosemite 2 GB Combo update took about 15 minutes, a far cry from the App Store which would have taken hours.
Is there some setting I need to change to increase the download speed from the Mac App Store or is it just overloaded servers? Why then can I download the files from the support page and not run into the same slow speeds? Updating iTunes was also giving me very slow download speeds, so again, I went to the Apple Support Downloads & clicked the link to download the latest version of iTunes. The file downloaded in about a minute.
Any suggestions would be appreciated.
Thanks!

Apple servers are overloaded. Instead of using App Store, use safari to download the updates manually from apple websites.
Here's a link for OS X 10.10.2 Combo Update.
OS X Yosemite 10.10.2 Combo Update
I had the same issue and downloaded manually from this link. It took me about 30-40 minutes. I'm using a 5mb connection. Your 40mb connection should be faster.
As for the iOS updates, you will have to download them from your iOS devices, because there are no standalone updates for iOS. Alternatively after you update your Mac, use iTunes to download iOS updates by connecting your iOS devices with your Mac. That should be faster than downloading through your iOS devices.

Internal Disk to Disk Data Transfer Speed Very Slow

I have a G5 Xserve running Tiger with all updates applied that has recently started experiencing very slow Drive to Drive Data transfer speeds.
When transferring data from one drive to another ( Internal to Internal, Internal to USB, Internal, Internal to FW, USB to USB or any other combination of the three ) we only are getting about 2GB / hr transfer speeds.
I initially thought the internal drive was going bad. I tested the drive and found some minor header issues etc... that were able to be repaired so I replace the internal boot drive
I tested and immediately got the same issue.
I also tried booting from a FW drive and I got the same issue.
If I connect to the server over the ethernet network, I get what I would expect to be typical data transfer rates of about 20GB+ / hr. Much higher than the internal rates and I am copying data from the same internal drives so I really don't think the drive is the issue.
I called AppleCare and discussed the issue with them. They said it sounded like a controller issue so I purchased a replacement MLB from them. After replacing the drive data transfer speeds jumped back to normal for about a day maybe two.
Now we are back to experiencing slow data transfer speeds internally ( 2GB / hr ) and normal transfer speeds ( 20GB+ / hr ) over the network.
Any ideas on what might be causing the problem would be appreciated

As suggested, do check for other I/O load on the spindles. And check for general system load.
I don't know of a good GUI in-built I/O monitor here (and particularly for Tiger Server), though there is iopending and DTrace and Apple-provided [performance scripts|http://support.apple.com/kb/HT1992] with Leopard and Leopard Server. top would show you busy processes.
Also look for memory errors and memory constraints and check for anything interesting in the contents of the system logs.
The next spot after the controllers (and it's usually my first "hardware" stop for these sorts of cases, and usually before swapping the motherboard) are the disks that are involved, and whatever widgets are in the PCI slots. Loose cables, bad cables, and spindle-swaps. Yes, disks can sometimes slow down like this, and that's not usually a Good Thing. I know you think this isn't the disks, but that's one of the remaining common hardware factors. And don't presume any SMART disk monitoring has predictive value; SMART can miss a number of these cases.
(Sometimes you have to use the classic "field service" technique of swapping parts and of shutting down software pieces until the problem goes away. Then work from there.)
And the other question is around how much time and effort should be spent on this Xserve G5 box; whether you're now in the market for a replacement G5 box or a newer Intel Xserve box as a more cost-effective solution.
(How current and how reliable is your disk archive?)

Since the last two updates WIFI is very slow

Hello, everybody!
I mentioned, that YouTube was not fast enough to load as fast, as to play the video from the beginning to the end, without stop.
The I measured the internet bandwith available: 193 kbps.
My ipod touch is connected via WIFI directly to my MacBook. The MacBook shares the internet connection it has via ethernet, via WIFI to the iPOD.
The Macbook has 20000 kbps available. Until one of the last updates I could use 3500 kbps of them on the ipod touch.
Do I have to wait for the next update (bugfix), or can I help myself?
The ping rountrip times are beetween 20 and 200 ms. When I put the intervall for ping to 0.1 seconds, the ping times come down to the normal 1 ms. During this heavy ping-Attack the available bandwith on the iPod is four times higher: 800 kbps. Still not nice, but enough for youTube to load fast enough.
On another site I read, that it would help to switch WIFI to 11 Mbit. How do I do this on my MacBook?
Thanks in advance -
Klaus.

This is such a PITA! I do not have time to troubleshoot software. Many of us spend our lives starting at a computer and this crap destroys productivity!
I did recently replace Adobe Reader because it started taking 10+ seconds to open a document on my desktop. Found Foxit reader (unassociated with Firefox I believe) and solved that problem. And I just removed all Adobe products (Flash Player) and it does seem to speed things up considerably. Granted at some point I will need a flash player (don't know if there is an alternative) and if the slowness reoccurs in Firefox I guess I will switch to Chrome. Sad, I really like Firefox, except when it is slower than death tied to a stump.
It does appear that Adobe products are what is currently destroying world productivity. It's amazing that they could beat Microsoft in this category. They must have put forth a monumental effort to achieve this.

Software updates download is very slow

Today I downloaded 2 software updates; OSX 10.9.5 and Safari 7.1. The download speed was very slow and erratic. The activity monitor showed that the process "softwareipdated" was receiving data at anywhere from 1 to 25 kbs. My DSL connection is never very fast but typically receives 130 to 150 kbs. Other downloading such as streaming music or video has been normal. Any ideas why this happened and could this be a symptom of some more fundamental problem?

It may not be exclusive to Verizon but considering that Apple updates are severely affected on my system, yet my next door neighbor with Comcast has no problems whatsoever, I am 100% confident that Verizon is playing a role in my woes. In fact, I updated my wife's iPad to iOS 8 OTA on a relative's Xfinity wifi just to get it completed. Took me about an hour to complete. I came back home, less than a quarter mile away to my lovely FiOS and boom, 15-20 hour download estimate on my rMBP to update my iPad Mini (which I'm saving for last or at least until this issue is resolved). Changing my DNS seemed to work briefly on my rMBP but less than a day later my speeds were back to being slow as molasses. At least I had the opportunity to update both my rMBP and iPad Air before the speed took a nosedive again. Just wish I had updated the Mini too. I figured the problem was resolved and I'd get a chance to update it later.
Judging by several posts I found online (links to two examples posted below), I see I'm not alone in thinking something funny is going on between Apple and Verizon. I won't refute your claim that it is also affecting other providers, because your experience sounds pretty close to mine, but everyone I've encountered with problems in this area has FiOS. Folks around me who subscribe to other ISP's seem fine. The link below to the discussion on dslreports (2nd link) is particularly telling because I read it after trying various troubleshooting steps and was surprised by the number of people who posted in that thread that had identical issues and troubleshooting experiences as me. Several people also mentioned that the problem disappeared after they connected to Apple update through a VPN.
I assumed it was primarily on the East Coast because I have relatives in the West and Midwest with FiOS who have not had any issues.
I called Verizon but that was about as useful as your experience. They didn't even bother pointing fingers. They simply said "if everything else works then I'm getting what I pay for". I promptly replied that as an almost exclusively Apple household, I am most certainly not getting what I pay for if I can't upgrade my software, apply security patches or use my Apple streaming devices. Unfortunately, no one seems interested in fixing the issue, so we're left to find our own solutions.
And that's exactly what I did roughly an hour ago. Comcast will be out to swap my equipment and service in 14 days. Problem solved... At least I hope.
https://discussions.apple.com/thread/6552992
http://www.dslreports.com/forum/r29544596-FIOS-horrible-Apple-download-speeds.

After Photoshop CC 2014 update - Photoshop is very slow (Windows 7)

After updating today to the latest photoshop cc2014 Version, Photoshop starts very slow and is not useable.
I updated from V. 2014.1.0 to 2014.2.1 20141014.r.257.
Starting Photoshop Needs 6 minutes (before 1.5 minutes). The menue and button reactiontime is more than slow, you cant work with this Setup.
Is there a Problem with the new release?
And please Adobe, dont tell me, my System has a problem. Did only an update on the CC2014 Suite via creative cloud. Old PS Version (2014.1.0)runs great.
After testing a few time, I recovered my System back to Version 2014.1.0 with Windows recovery and Photoshop works good again.
So whats wrong with the new release?
My PC config:
Adobe Photoshop Version: 2014.2.1 20141014.r.257 2014/10/14:23:59:59 CL 987299 x64
Windows 7 64-Bit
Version: 6.1 Service Pack 1
Intel CPU-Familie:6, Modell:10, Stepping:5mit MMX, SSE (ganze Zahl), SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, Hyper-Threading
Physischer Prozessor: 8
Logischer Prozessor: 16
Prozessor-Taktfrequenz: 2664 MHz
Memory: 20463 MB
Thanks for any tipp!
BR.
Werner

The CC 2014 update 2014.2.1 is a month old and ACR 8.7 is two days old. Something strange is happening to you. First try resetting your Photoshop Preferences. This is a Adobe Photoshop User forum your not dealing with Adobe here. You seem to think you are and your attitude seems like you not open to to possibility that your system may have a problem. I think you may have one..
Adobe CC 2014 Product Updates/Downloads for Windows
Photoshop CC 2014
File Download
Size
Date
Notes
Adobe Photoshop 2014.2.1 Update for CC 2014 (64-bit)
249 MB
10/20/2014
Release 15.2.1
Adobe Photoshop 2014.2.1 Update for CC 2014 (32-bit)
223 MB
10/20/2014
Adobe Photoshop 2014.2.0 Update for CC 2014 (64-bit)
249 MB
10/6/2014
Release 15.2
Adobe Photoshop 2014.2.0 Update for CC 2014 (32-bit)
223 MB
10/6/2014
Adobe Photoshop 2014.1.0 Update for CC 2014 (64-bit)
236 MB
8/5/2014
Release 15.1
Adobe Photoshop 2014.1.0 Update for CC 2014 (32-bit)
210 MB
8/5/2014
Adobe Camera Raw – ACR
Adobe Camera Raw 8.7 Update for CC
122 MB
11/18/2014
Release 8.7
Adobe Camera Raw 8.6 Update for CC
106 MB
7/28/2014
Release 8.6
Adobe Camera Raw 8.5 Update for CC
100 MB
6/18/2014
Release 8.5

[SOLVED] Network speed very slow, no apparent reason

Hello, recently I switched from Windows 7 RC1 to Arch on my home machine (I have used Gentoo, Ubuntu, and Fedora 10 on the same machine in the past), and for some reason network speed is very slow.
I have Verizon's 20mbit/5mbit package, and I have always gotten that speed.
Using speedtest.net and 100mb.test from cachefly on multiple computers I have come to the conclusion that it is infact my Arch install that is causing the problem:
- All other machines on my network are getting 20/5 (both wired and wireless)
- I ran a speedtest from 2 other machines using the ethernet cable that this PC is on. Again, full 20/5.
- scp transfer of 100mb.test from this PC -> other Arch box: ~2.8MB/s.
- scp transfer of 100mb.test from other Arch box -> this PC: ~2.8MB/s.
- scp transfer of 100mb.test from this PC -> UK VPS (100mbit line): ~539KB/s
- scp transfer of 100mb.test from UK VPS -> this PC: ~76KB/s
- scp transfer of 100mb.test from this PC -> Chicago Server (dual gbit lines): ~563KB/s
- scp transfer of 100mb.test from Chicago Server -> this PC: ~91KB/s
speedtest.net result:
Upload speed seems to be unaffected.
I have tried disabling TCP window scaling, and appending my hostname to /etc/hosts.
What is weird though is that the other Arch box has an identical network config, I don't see any reason why it shouldn't work.
My NIC is an integrated Realtek something, I can get the exact model if needed.
Last edited by whipsch (2009-06-05 18:29:21)

Hi, whipsch
Can you try ethtool to see if your ethernet card is actually negociating and using a 100Mb full duplex link on your LAN ? If not you can try to force the link parameter with ethtool. Also maybe the driver of your NIc has options related to link negociation.
Hope this helps,
JF

Internet speeds very slow.

Found web browsing very slow this morning. Checked my World of Warcraft account and that was also running slow.
Did a speed test and got these results.
Download Speed
0.42 Mbps
0 Mbps
4 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.42 Mbps
For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.
IP Profile for your line is - 2.79 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.02 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Checked the service status and there is no problems in my area
Any help please.

It is a wired Connection
Help
My broadband connection
Your broadband line is connected.
Broadband connection details:
Downstream
3,167 Kbps
Upstream
34 Kbps
Connection time
0 days, 2:13:38
Data transmitted
9.31 MB
Data received
34.88 MB
Broadband user name
[email protected]
My telephones
Current settings for the telephones and handsets connected to your BT Home Hub.
Calls to:
Will ring:
Status:
My landline
None of the Hub Phones
There is no Broadband Talk account associated with your Home Hub.
To activate your Broadband Talk account click here
To view or change settings click here
My home network
Devices connected to your BT Home Hub.
Wireless:
android-19f677c5fe397e11
Wireless:
BenHarrison-HP
Wireless:
Wii
Ethernet:
Marcus-PC
USB:
No devices detected
BTSpeedtester Beta (taken from http://speedtest.btcentralplus.com/beta/)
Download Speed 0.63
Upload Speed 0
Ping149.63

EA4500 speeds very slow and inconsistent

Purchased the EA4500 a few months ago. Worked fine for a week or two. Now my download speeds bounce between 2mbps-20mbps and its constantly stuttering. My modem gives me 100mbps when im wired in so I know for a fact that the modem is not the issue. I'm using both the 5ghz band and 2.4ghz band and both of them give me terrible results. The speed is so slow and fluxuates so often it's barely usuable. I've tried changing settings with the media prioitization, I've tried changing the MTU size, I've tried using different channels, I've tried rebooting the router, setting it back to factory settings and even tried using the classic firmware and that just locked me out of my router since the router login and password no longer worked (default and ones Ive set). I'm at a loss here and getting really fed up with this garbage router. Is there any fix for this? I've scoured the internet looking for an answer and all I've seen is other people problems never being fixed.

Yes, I'm currently using the most current firmware which is version 2.1.41.164606. I've tried all previous firmware versions and the speed is still very slow and inconsistent on every one. I've rebooted to factory twice now and tried changing channels, MTU sizes and channel width on both the 2.4 ghz and 5ghz networks. It worked fine for about a month and suddenly it barely works now. If anyone has a solution that would be great but If not I'll just get a netgear N750 when I have the money.

WAN speed very slow

Hi,
Have a rv130w router here and wan speed is very slow.
Router basic config and has no vpn's setup.
I see squashfs error and cpu 95 % load error.
see logfile
somenone else having this too?
regards
Dirk

Good morning
Thank you for using our forum, my name is Johnnatan I am part of the Small business Support community.
Hi Ronald, I apologize for the issues you are having, please call the Small Business Support Center to confirm if this is a bug. Please go here to find the phone number in your country:
https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html , you will see a telephone number list , select your region and contact us to report it.
Remember you could overload your device capacity if it has activated multiple services such as IPS, multiple tunnel, Ipsec etc. I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings.
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Broadband speed very slow (again)

My broadband speed has been very slow for the past week or so, very hard to stream videos, download etc. Broadband download speed is normally around 7-8mbps mark and has been around 1-2 or lower this past week.
Speed test..
ADSL stats (I think a housemate must have reset the router 2 days ago)..
There are no problems reported at my local exchange.
I already had this same problem in January. It was fixed for a while but now it is really slow again.. https://community.bt.com/t5/ADSL-Copper-Broadband-Speed/Speed-way-way-down-on-normal/td-p/1149716

this is not the same as last time.. last time your speed was down at about 2mb wheras this time you have 11mb connection.
can you run btspeedtester again with wired connection and when first test completes then run diagnostic test and post results
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Firefox 33 update - mouse speed very slow

Similar Messages

Maybe you are looking for