Firefox 34 and Norton Internet Security (Version 21 ff) Don't Like Each Other and It's Not the Toolbar!

I have discovered that Norton Internet Security (and Norton 360 as well) version 21 and after conflicts with Firefox version 33.0 and later. I have been running the latest Firefox 34 version. When I upgraded on two of my computers to the latest version of NIS (version 21) Firefox (version 34) froze; indeed it locked up the entire computer. I therefore installed Google Chrome and everything worked fine. I can reproduce this error with Firefox like the flip of a switch; it is very consistent! The conflict, by the way, does not go away by disabling the Norton toolbar. I want to continue to use Firefox, and not Chrome, but I don't want the browser to freeze the machine. I run Windows 7 Professional. Do you have any suggestions?

Oh... I spoke too soon. I went into my office today and ran Norton 360 (Version 21.6) and Firefox 34.0.5 thinking that all would be well because I shut off Hardware Acceleration. Boy, was I wrong. Norton 360 crashed with the Windows message: "Norton 360 has stopped working; it will be shut down." I immediately shut down the computer (even though someone was actually in my office at the time), rebooted, no longer ran Firefox and did a complete virus scan. All is well if I do not use Firefox 34. And so.... I am going to make my life easier and simply move over to Chrome at least on my office machine. I just don't see any other way out of this predicament. I do this reluctantly because Chrome is much slower than Firefox is especially the way I run it. Firefox 34 and NIS Version 21.6 just don't like each other.
Thanks for your help. It's been a good thread even though I could never figure this out.
Needs more help.

Similar Messages

Sun One AS7 and Norton Internet Security (Personal Firewall)

Hello,
I have installed:
- XP Home Edition Version 2002 SP1
- Norton Internet Security Version 6.0.4.34 (Personal Firewall)
- Sun One Application Server 7, Platform Edition
When Personal Firewall is running I get:
Could not start the instance: domain1:admin-server
server failed to start: abnormal subprocess termination
Could not start the instance: domain1:server1
server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain : domain1
Could not start one or more domains
Press any key to continue . . .
I've read the release notes:
- changed port numbers
- modified the firewall policy
and still experience the same problem.
When Personal Firewall is not running it works.
I guess I can just turn off my firewall when I evaluate this product.
I was wondering if anyone who has experienced and solved this problem
could lend a hand.
Thank you!

Sorry! Does it work if you disable the Smart Firewall in Norton Internet Security? Did you check uninstalling Norton?
Thanks!
Harry

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad. I need help

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
Please help!

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
Please help!

Are there any compatibility issues between Firefox 6-beta and Norton internet security?

I received a warning before installing it that Firefox 6-beta is incompatible with the Norton toolbar - does this imply any deeper compatibility problems with Norton?

That "test" only implies a number is incorrect in the add-on, nothing more should be read into that message.
Norton, and many other security software vendors, don't usually support pre-release Beta version web browsers. Firefox only checks the '''maxVersion''' specified in the install.rdf file for the extension that is installed in Firefox, which is a very minor point as far as "compatibility" goes, and that is "set" by the developer of the add-on. The burden for true compatibility is on the developer.

E4200 - PCs don't see each other and printer on USB port not working

I been around tech all my life. Acquired by MS when they had only 2000 employees. I don't get excited about tech. Its a tool to help you do something better, excluding games. I had the linksys wrt54... with booster antennas. Worked great, but could not reach one room, the furthest away. Even though I retired 10 years ago I do some private work for fun. I was required to change from 16bit WEP to WPA. My WRT54 just missed the cut off so I went and bought the best home product they had;
*I have 8 computers and connecting them was time consuming *The computers with same settings don't all see each other. The printer port USB off the hub is a great idea if it worked. They have an upgrade to fix this but ever time I try to install the firmware it fails.
This product has...
Fast connection
Short range
Reliable connection
About me...
Technology guru
I use it in...:Large home

In reference to the issue that you are facing I would like to recommend you few things.
For computers to see each other on the network and to share information they have to be in the same work group, file sharing should be enabled on all the computers and they have to be in the same network. If you are still facing issues, try to disable the firewall on the computers.
As far as your printer is concerned, I would like to know whether you are trying to install the printer with the help of cisco connect, if yes, then please try to upgrade the latest version of cisco connect and then follow the link below.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1f15297303cd4080b17d40fa3d4c1126_Connecting_a_USB_...

Flash and Norton Internet Security

Can someone help me figure this one out... I built a flash
movie and inserted into dreaweaver for my website...When I am at
work it wont load AT ALL.....I turned off Norton for a few moments
and voila...there it was...is there any way to stop Norton from
blocking this from loading??

tfarzalo;
My guess would be that you are using a filename such as "
banner" or ad"
or somesuch, try changing the filename to something less
likely to be
blocked... -Tom Unger

I save web site passwords, but it does not consistently enter them when I log onto the same site. Seems to have started occurring after I installed Norton Internet Security 2012. Anyone aware of this issue and how to resolve?

It works fine for a day or so, but seems to fail the next day.

Websites may be using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

IOS 4.2 and Airport Extreme don't like each other

I have three iPod Touch's - one 3G and two new 4G's. The 3G never had any problems connecting to the Extreme until it was upgraded to iOS 4.2 now it rarely even sees the Extreme even if I am sitting right beside the router. The 4G's also rarely even see the Extreme. Occasionally they will "connect" but I do not actually get an IP address and thus no actual internet connection.
I did set up a guest network on the Extreme sans security so I could ty and connect with any WEP/WPA issues. Again the iPods will sometimes see the Extreme but when it "connects" I almost never get an IP address. On one occasion I was able to connect to the guest network and did get an IP address and a net connection but it was so slow it was essentially unusable.
All three iPods will connect to other routers (non-Airport Extreme) without any problems. Fortunately all 3 devices can also connect to my MiFi without any problems whatsoever.
My Mac Mini connects wirelessly to the Airport Extreme without any problems and I have other devices connected to the Airport Extreme via ethernet cabling and all work without any problems.
I have tried all the usual resets, restarts, etc. to no avail.
I was going to go ahead and just buy a new Airport Extreme thinking that perhaps the problem may just be with the radio transceiver part of the router. However, since the Mac Mini connects wirelessly just fine the radio transceiver in the router is probably ok.
It appears to me that judging by my problems and from other folks having similar issues with iOS 4.2 devices that there seems to be a serious bug with that iOS version and wifi connections to Apple's own router and apparently some other wifi routers.
I hope Apple addresses this issue soon!!!

Do a search on the forums. This topic comes up pretty often. Before you do anyhting esle, though, I'd go here
http://java.sun.com/getjava/download.html
and get the updated JVM for XP. XP doesn't come with the latest JVM installed. Instead IE is using the MS piece of crap that they are legally allowed...
Anyway, if you load the JVM from the auto installer at that link, your IE options (advanced) will be set to use this JVM instead of the MS piece of crap. If you manually download and install (no real good reason to) you will have to change the preference yourself (there're instructions).
I use XP prof and SDK's for 1.4 and 1.3 plus the websphere eclipse for limited devices and regular Java, and haven't had a problem with any of it -- but I updated the JVM early and made sure IE points to it.
I also have my XP machine dual boot with SUSE 8.0 Linux. Actually, XP prof has been really stable for me.
Luck to you

PhotoShop cs4 and Illustrator cs4 don't like each other

Okay I'll make this as simple as I can. Im on Windows 7 64bit.
I have some graphics I need to get out of illustator and into PhotoShop. I tried the following:
1. Copy/Paste into PS : Results in crashing PhotoShop.
2. Disabled PDF in illustrator clipboard preferences tried copy paste again: Results in crashing PhotoShop
2.5 At this point hitting CTRL + N in PS: Results in crashing PhotoShop. I have to go copy an image out of my browser to clear the clip board so PS will stop crashing
3. Saving out an .ai file and open it in PS : Results in crashing PhotoShop.
4. Saving out an .eps file and open it in PS : Results in crashing PhotoShop.
The only way to do it is to save out a PNG. This however makes the entire smart object feature usless.
Anyone else having issues.
This was working fine in the past. The only thing I can think of is the latest Windows 7 update might have screwed up the clipboard. But that is just a guess.

Photoshop will crash.
If you have a bad font then you have to find it and the best way is process through elimination. Divide the fonts in half and if Photoshop does not crash then you know the font is in the other half. Keep doing it until you find the corrupt font or fonts. Best way is to try and remember what 3rd party fonts were installed in windows and remove those.

Connecting two wrt150n version 1.1 routers to each other and a Siemens SX 551 router

This SX 551 has 4 UTP outputs. I have a digital video receiver connected to one of these outputs by means of an UTP cable. I want to replace this UTP cable bya wireless link. I have two wrt150n's to do the job.
I connect one wrt150n via an UTP to the SX551.
First question: should this be done by normal UTP, cross over or does it not matter
Second question: how should I choose the paremeters of both wrt150' s such as: which mode, IP adresses.
I am building a bridge between two IP network although one is very smal, just adigital video receiver.
Right now i am using two labtops to control the two routers. once the wireless link works the labtops are removed.
Yours sincerely,
HansH

It won't work. At one end you can use a WRT150N as access point to broadcast signal, but atleast at other end you need a wireless bridge like WET54G, or a access point(wap54g) set in AP client mmode. Its better if you get both sides WET54G or WAP54G

AHCI and GRUB don't like each other

Hello everyone!
Yesterday I wanted to give Arch Linux another try, but GRUB failed to boot my HDD -> GRUB error 21. That's when I installed Arch Linux in AHCI mode. When I installed it in IDE mode, everything worked fine. So, I tried to enable AHCI afterwards: GRUB gave me error 21 again. I followed this guide http://wiki.archlinux.org/index.php/AHCI to enable AHCI after the installation. I tried installing GRUB on first HDD, on second, even tried to install on GPT (created via gparted / Ubuntu Live), but GRUB just kept giving me errors (error 17 this time). I used Auto-prepare, when I installed Arch on an MBR drive, but I had to use "Set mountpoints", when I installed Arch on a GUID partition. I chose "label" method to recognize the drives at startup. I was using a USB drive to install Arch Linux (2010.05), but I also tried a CD (with lots of I/O errors).
My Setup:
Intel Core i7-860 @ stock
Gigabyte GA-P55-UD5 with AHCI ROM 1.20E / F10 BIOS (latest stable bios)
640GB Western Digital Caviar Black (sda / MBR / Windows XP on ~140GB Partition / ~465GB unlocated)
640GB Western Digital Caviar Black (sdb / MBR / 100MB boot / 8192MB swap / 16384MB root / ~520GB home)
LG GH24NS50 Super-Multi Drive
4GB Corsair DDR3
Radeon HD5870
The whole setup works fine in Windows 7 / XP with AHCI enabled.
Can someone tell me, what I'm doing wrong?
Thank you for your time,
tolga9009
Edit: Hey, I just tried it again. I used gparted to create a GUID partition table on my second HDD, enabled AHCI mode in BIOS and run the setup with USB again. This time, I chose UUID. However, the bootloader didn't install at all (error 17; unable to mount). I also tried to install the bootloader on the first HDD, but GRUB gave me error 17 again. This is so frustrating.
Last edited by tolga9009 (2010-10-13 13:11:12)

Did you use mkinitcpio with the achi module? See the wiki for ahci.
I followed this guide http://wiki.archlinux.org/index.php/AHCI to enable AHCI after the installation.
I also edited the mkinitcpio.conf during the installation, when I ran an AHCI enabled installation. It probably could be a bug, I'll wait for the results of https://bugs.archlinux.org/task/21086.
Thanks.

Does Firefox disable my current Norton Internet Security?

If Firefox is the security software for Google Chrome, what happened to my current security software, Norton Internet Security 2011, for my Windows default browser, Bing? How do I enable Norton Internet Security 2011 for Google Chrome?

One other note. Firefox allows two situations in which some or all toolbars may be hidden:
* Full Screen Mode. The F11 key switches between normal view and full screen view.
* Script-generated windows. Sometimes when you click a link you launch a window that does not have all of the features of a normal window. This allows sites to present a simplified display, more like a dialog box. If this happens, pressing Ctrl+n should always open a normal window with the full complement of controls.

Problems with the Oracle Home Page (maybe Norton Internet Security)

Hello Everybody!
Like others messages, I've got problems to see the Oracle 10g Home Page. I can log to the database in SQL Plus perfectly, but not in Home Page. I tried by the following ways:
http://127.0.0.1:8080
http://127.0.0.1:1521
http://{my_ip_adress}:8080
http://localhost:8080
and I can't display anything. I've got WinXP Professional Edition and Norton Internet Security. I tried to connect changing the options of Norton's Firewall, but the Home Page doesn't work. Somebody has any idea what´s my problem?? If so, tell me please. I've worked many nights in the solution, but the problem still be there.
Thanks for reading, and replay...
Mario.

To diagnose a installation issue:-
Please provide the following
1) The output (from the DOS command line) of lsnrctl status
2) The output (from the DOS command line) of netstat -a
3) The output (from the SQL Command line) of
connect / as sysdba;
select select dbms_xdb.gethttpport() from dual;
Please note that the output of netstat -a can provide information that could be used to compromise your system. If the system is on the network, please upload the output to the upload site.
If this checks out correctly (8080 is the port), then it is a browser issue. These can be legion. Check that you are not going to a proxy server for 127.0.0.1 or host. Check that you are not disabling access to 127.0.0.1 or host in your browser. Check that cookies are enabled. If possible, try a different browser (copy and paste the URL from one to another) Check that the host name you are providing actually resolves to your local machine (ping host)

Do I need to add Norton Internet security to my iPhone 5s ?

Do I need to add Norton Internet Security to my iPhone 5s ?

No. It isn't necessary since the closed/sandbox nature of iOS makes getting malware very very very unlikely. Plus, these isn't an effective anti malware app for iOS, so nothing you can install.

Can get onto Internet but Computers don't see each other

I've got my Linksys connected via ethernet to a desktop - using DSL. Security enabled. Had my network set up fine - a wireless laptop sees the intenet connection and the computers saw each other fine (shared disks, etc.)... Today, my DSL went down for a bit - I jumped onto my neighbor's open wireless. My DSL came back up. THe desktop and laptop both see the internet. But they don't see each other any more. I've run those stupid wizards ten times. I've tried creating a new workgroup. They can ping each other. I don't get it. HELP!

When changing settings for file/printer sharing on Windows it is always necessary to be patient. The whole workgroup browsing concept of windows requires some time to be up to date. I suggest you run the sharing wizard ones and follow the instructions there exactly.
Also try to ping the other computers to see if anything goes through.
As you have "jumped" to your neighbor's network for a moment also make sure you connect to the correct network. Better remove the neighbor's network from your list of preferred networks. Else you end up there accidentally.
Therefore, you should better setup the sharing while all computers are wired to the router.
Another possible cause could be the firewall on the computer. Make sure to turn it off to see if it is the problem. Most software firewalls (except the windows firewall) react very sensitive when you just 'jump' to another network and tend to block all traffic by default.Message Edited by gv on 02-09-200701:58 PM

Firefox 34 and Norton Internet Security (Version 21 ff) Don't Like Each Other and It's Not the Toolbar!

Similar Messages

Maybe you are looking for