Firefox 4.0.1 new features did not install.

I installed Firefox ver. 4.0.1 but everything looks the same as before the install. The only noticeable difference is that the '''Home Button''' did move from the middle to the right side. When I check '''About Firefox''', it does list the version as 4.0.1. When I click on '''Check for Updates''', it says, “Firefox is up to date” When I click on '''Download Firefox''', it says I am already running 4.0.1
According to the TAKE THE TOUR site, the most obvious missing features are:
1) '''Firefox Button '''which should be in the upper left-hand corner
2) '''Bookmark Button''' which should be to the right, next to the '''Home Button'''.
Also, there is no “one click” button for Private Browsing, the Awesome Bar does not seem to have the extra features as described, and new sites do NOT open as Tabs,
According to Firefox 4.0.1 is compatible with Windows 2000 so it should not be a problem with the operating system. One other tip, I did try to upgrade one of the Add-ons (AniWeather) which has been updated to be more compatible with 4.0.1. It would not install because of missing dll’s. This seems to be one more clue that 4.0.1 did not fully install.
Any help would be greatly appreciated.

You're welcome. Yep, it is a shame that Mozilla didn't document the lack of the orange Firefox button on WinXP and W2K, but there ain't that many of us still using those older operating systems any longer. I switched from W2K to WinXP last summer when the 4.0 betas were broken on W2K ''(hand writing on the wall)'', that was fixed a few weeks later, but support for W2K is iffy going forward into the future, they have all but stopped testing on W2K. If Mozilla changes something that W2K and WinXP SP 1 & 2 don't support they're not going to be supported any longer, but they claim that they aren't going to stop support on purpose.

Similar Messages

  • Windows 7 (64-bit) did not install scanner part of 1310 Series 1315xi.,,

    Just bought 64-bit Windows 7, which  detected and reInstalled my All-in-One's Printer and Copier, working well, so I don't want to buy new,  but did  not  install  Scanner.   My 1310 Series installation disk was  not  for  Windows 7, actually, nothing past  Vista and XP, and   Win 7 doesn't  seem to be recognizing  even  new  dIsks, taking it in tomorrow for a D-Drive. Is   there  a  1310 Series  installation disk   for  Windows  7?   My All-in-One is actually year  2004 ,   1315xi,  and   when  I bought it,  only the Series disk would install  it.    The  printing and copying  equipment works   so  well  that  I  do  not  want  to  buy a  new  printer.   Would I have to first UnInstall  the whole thing to use  new  installation  disk  to  include  Scanning?  Thanks in  Advance.     
    This question was solved.
    View Solution.

    You need to have the TWAIN driver for the 1315xi in order to use the scanner.
    There is no Windows 7 scanner software available from HP.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Adobe Acrobat XI Pro - Toolbar Did Not Install in Firefox

    Hi,
    The toolbar did not install in Firefox.  I'm using Firefox 31.0 on a Windows 7 Computer.  I want to be able to convert webpages to pdf files and print the webpages out.

    Go to your Extensions in Firefox to see if it is ENABLED or DISABLED.  My money is on DISABLED.

  • I upgraded to CS5 on old pc, but did not install it. I have new pc and want to install upgrade

    PS5 was on sale and I upgraded but did not install on OLD pc. I now have a new pc and want to install my CS5 and don't know how to go about it

    use your installation discs or download the installation files.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT4623 All new iSO6 applications did not install. How do I retrieve them.

    All new iSO6 applications did not install. How do I retrieve them. (Exp.SIRI)

    Siri is not available on iPad 2

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

  • I downloaded an update yesterday and it did not install correctly..gives me error... now I cant even open itunes...should I uninstall I tunes totally and do a brand new install?

    I downloaded a new version of I tunes yesterday and it did not install correctly- I cannot open I tunes, I have tried to download again, install again, repair and nothing... should I uninstall ITunes completely and reinstall fresh? what happens to my music collection, images, etc?

    Hi bezoya,
    Thanks for using Apple Support Communities.  If iTunes is not launching after an update, I would recommend trying a thorough reinstall as described here:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    - Ari

  • How do i unlock my iphone4s my new password did not work

    how do i unlock my ipone4s my new password did not work

    Restore it on the same computer it was last synced to. This will remove the passcode.

  • I purchased Lightroom from B&H Photo a few months ago.  I did not instal the software, because I was purchasing a new computer in the near future.  I am now purchasing that computer, but cannot find the software.  B&H suggested that I contact you directly

    I purchased Lightroom from B&H Photo a few months ago.  I did not instal the software, because I was purchasing a new computer in the near future.  I am now purchasing that computer, but cannot find the software.  B&H suggested that I contact you directly to help me.  I have the receipt, and you can look to see that the program was never used.  It would be great if you could just send me another copy of the software.  Thank you very much.
    Marc

    Download from Adobe's website
    Win: Adobe - Lightroom : For Windows
    Mac: Adobe - Lightroom : For Macintosh
    Install then enter your serial number when prompted.
    I have the receipt, and you can look to see that the program was never used.
    The receipt is only of use to B&H. Adobe will have no record of it.
    If you quote an Adobe Lightroom serial number then Adobe can confirm if that serial number has ever been registered. That step should not be required at this stage though. Just install the software.

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • Icloud did not install my apps from my previouse ipad when I set up my new ipad, any suggestions?

    icloud did not install my apps from my previouse ipad when I set up my new ipad, any suggestions?

    I show the last back up when I go into settings but I do not know how to get the items out of back up?  Should I try restarting it?  When I was setting up the new ipad for the first time it asked for my icloud login and password but it did not give me an option to retrieve the old back up?
    Thanks!

  • My new TC did not come with a disk to install the AP utility.

    My new TC did not come with a disk to install the AP utility. It is flashing amber and I have no way to figure out why.  I have downloaded recent and prior AP utilities but they don't load to my computer.  Please advise.

    What operating system is your computer using?
    If you have a Mac, click the Apple icon in the upper left corner of the screen, then click on About This Mac. Post back with the OS X Version number that you see there.

  • A few weeks ago I had to reinstall itunes on my PC because the latest itunes update did not install properly.  Ever since doing that something called Mobile Me keeps popping up whenever I open email (outlook) and slowing it down. How do I remove MobileMe

    A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it.  I was able to reinstall itunes and it works fine including syncing with my ipod.  However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program.  This a nusance and really slows down getting to my email.  From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes.  I can't find a way to remove this MobileMe from my PC.  I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it.  Any suggestions on how this can be removed?

    Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

  • MTP USB Device did not install

    New PC, Windows 7, Office 2010, My Blackberry desktop software does not see my 9530 Storm  I've downloaded new desktop software, but keep getting an error that my MTP USB device did not install when I connect my 9530 to the USB Port.

    BACK UP YOUR REGISTRY!!! Editing the registry can be (read: IS) dangerous and can cause no end of pain if done incorrectly.
    - To Back Up your Registry: Click START menu and click RUN. Type REGEDIT. Click File, then choose Export and type a name for the Registry Backup, something like REGBACKUP012015 or whatever works for you.
    - Click Export and let it export the registry to a file.
    - To fix the issue: Follow the folder tree on the left to: HKeyLocalMachine > System > Current Control Set > Control > Class
    - Find {EEC5AD98-8080-425F-922A-DABF3DE3F69A} down the LEFT hand side and click on it.
    - Under the list on the RIGHT hand side find UpperFilters
    - Right-Click UpperFilters and click Delete
    - Close the registry editor and restart your PC (without the iphone attached).
    - Once restarted and logged back in, plug in your iphone and voila!  Windows will actually choose the correct driver.

Maybe you are looking for

  • *sequence could not be opened...

    related to the other discussion thread in reference to the video exports having a blue tint... due to the blue tint issue - I found that it likely was the graphics card in the laptop that was causing the issue... so I transfered the CS5 files/project

  • Synchronizing Data

    Problem: When two different web applications are running and one person inserts a record, the other person doesn't see the record unless they reload the application. How do I permit one user to enter information and on the next action of the second u

  • Iphone 4 syncing problem

    We connect the iphone4 to itunes and it recognizes the iphone, but only a white screen appears that says "iphone" in the middle of the screen. This is my wife's iphone. Mine synced fine and let me choose which to install backup from. I'm not getting

  • Configure XI adapter for abap proxy scenario- plz help

    Hi, Pleas help me in configureing the XI adpater in abap server proxy scenario, answer the one in bold in below Scenario is asynchronous Http -> XI ->R/3(abap server proxy) sender: Through http client receiver is abap server proxy Repository objects:

  • BSP Changes in built-in SAP applications

    Hello all, I am aware of BSP programming and had developed couple of applications using the same. But those were independent applications fetching data from SAP data dictionary. Now I am working on SAP SCM where there are built-in pages and I wanted