Firefox 4.0 will not install. I have Mac OSX 10.4.11. Error message 10661.

I tried to install Firefox 4.0 and I got an error message 10661 and it said my system would not support it. I have Mac laptop with MAC OSX 10.4.11. Why won't it install using this operating system?

Firefox 4 doesn't run on a PowerPC Mac.
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

  • CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

    CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

    Old_Timer I would recommend reviewing your install logs to determine the exact error message.  You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Creative Suite will not install on my Mac OSX

    I have downloaded the installer, it installs but doesnt launch. Any clues?

    which suite did you install, what's your os version and what are you clicking to launch?

  • Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the s

    Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the software several times to no avail. I need some help.

    Appreciate your help Ian and others.   I have since uninstalled FCS and reinstalled FCXP only to get the same thing. Loading FCXP stalls at "Looking for Compressor Support".  When I first downloaded FCXP from the App store I didn't notice that FCS was being placed in it's own folder.  It's not something I did manually.  Although moved into it's own folder with FCXP on the same drive.  I was not able to open FCS apps. They would load and then "quit unexpectantly".  They opened just fine before I downloaded FCXP.  Do I need to purchase Compressor so that FCXP recognizes it? It seems this is where it stalls. It doesn't explain however why my computer "FREEZES" while doing this.  I am in the process of re-installing Lion to see if this helps, otherwise I am at a complete loss. 

  • HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

    I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    You can check here what version of Flash player you actually have installed:  http://kb2.adobe.com/cps/155/tn_15507.html
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Adobe Photoshop CS6 will not install on my Mac.

    Adobe Photoshop CS6 will not install on my Mac. Adobe Application Manager is seeing the Beta version of Photoshop CS6 on my machine.
    I have unistalled/deleted any previous versions of the software, and used the Adobe Creative Suite Cleaner tool to flush my machines. Sadly,
    I am still getting the following error:
    Photoshop CS6 Installation Failed
    A beta version of this product exists on the computer. Please quit and uninstall that version before continuing.
    I have unistalled/deleted any previous versions of the software, and used the Adobe Creative Suite Cleaner tool to flush my machines. I am now stuck!
    Any help would be appreciated.
    Cheers,
    Richard

    This is the instruction to remove PS CS6 beta
    http://forums.adobe.com/message/4361731
    It's strange that you ran the cleaner tool and still didn't worked
    you can try to login to Root user account and then run the cleaner tool , and then check.

  • Itunes will not connect with the store.  I get no error message.  The store just won't load on the screen.

    Itunes will not connect to the store.  I get no error message, the store just won't load.

    Have you had a look here,
    Can't connect to the iTunes Store
    From here
    http://www.apple.com/support/itunes/troubleshooting/

  • My first generation AppleTV will not sync with iTunes anymore.  I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689"  firewall is off

    My first generation AppleTV will not sync with iTunes anymore.  I get an error message that says: "The Apple TV is not responding Check that any firewall software running on this comptuter has been set to allow communication on port 3689"  firewall is turned off.. Any ideas?

    Thanks Rudegar,
    I only synch and do not stream off of my 1st Gen AppleTV
    I will try with ethernet but will be a pain in the butt if i can not fix it with wifi for long term fix
    I may end up trying to do a named IP address vs DHCP for this appleTV (not sure if i can do both and do not want to remove DHCP as i have a bunch of sensors and other devices that I prefer to dynamically add to the network via DHCP vs. assign each one
    Will keep working on other fix options (factory reset, etc.)
    Thanks again

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

    My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

    If running 10.7 or later hold down Command-R at Startup.
    This should invoke recovery Mode.
    Choose Disk Utility.
    Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
    Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
    If errors, run again until it comes clean or gets stuck.
    Report any error messages.

  • HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

    I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • I downloaded the newest version of firefox but it will not install, it is giving me a message saying the directory name is invalid. Why and what can I do to fix.

    The above message pops up when I try to install the new version of firefox. It will not let me install the new version. I do not know how to fix it. Please advise.

    Try a custom install.
    *https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows

  • When I download Firefox, my computer will not install and claims it is corrupt

    When i download Firefox, my computer will not run the install and claims the file is corrupt.

    Firefox versions 3.0 and higher require OSX 10.4 and higher:
    [http://www.mozilla.com/firefox/system-requirements-v3.html]
    [http://www.mozilla.com/firefox/system-requirements.html]
    [ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/Firefox%202.0.0.20.dmg Firefox version 2.0.0.20] is the last ever version of Firefox for OSX 10.3.9 and lower.
    However, I would think about finding/creating an unofficial build of Firefox 3 for older Mac (if you cannot get next version of Mac OSX). If it's possible. I don't know.
    Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools

  • The latest update for iCloud has downloaded, but, will not install, I have tried manually as suggested.

    The latest update for iCloud has downloaded, but, will not install, even when tried manually. The QuickTime update which was on the same page was ok though!

    I have the same problem....I hope they get arouind to fixing this issue?????????????????

  • PSE 8 will not install on new imac OSX Snow Leopard

    28. Feb 26, 2010 4:16 PM in response to: docmark86
    Re: PSE8 will not install on Mac Snow Leopard 10.6.1
    I have a new iMac 21.5 screen with OSX Snow Leopard.  I installed IWork and turbo tax with no problem.  Nothing else.
    PSE 8 installation fails after about 80% installation just as install for PSE 8 starts. I've spent hours on the phone with Adobe and they blame it on OSX   Error analysis states:   "Uncaught JavaScript exception: Unable to read Adobe file version for path /Library/Fonts/MinionPro-Bold.otf  Apple techs have also tried."   The latest communications from Adobe instructs me on validating fonts.  We have also tried  CS3 Clean Script since the install failed several times. Case # is 0181442609.    Nothing works and Apple techs are still researching.  Any suggestions from an Adobe professional?  I am new to the Mac environment so any complicated actions may require some "hand holding".
    Thanks to all!
    Doc

    Doc, I would suggest go to the font location which from your post is: <Macintosh HD>/Library/Fonts/MinionPro-Bold.otf. There should be a font file with this name. If it exists, just "cut" it from this location and paste it on the desktop for some time and then try to install PSE again and see if that works.
    If the font file doesnt exist and instead an empty folder names "MinionPro-Bold.otf" exists, then delete the folder and then try to install PSE again.
    In either case, please do attach the installer log file in the forum thread so that I can have a look at it. They can be located at the below location:
    <Macintosh HD>/Library/Logs/Adobe/Installer/"...Adobe Photoshop Elements 8.0...."
    If there are multiple copies of the installer log files, then please delete them and then try to install PSE 8 again. If it fails, quit the installer and attach the new log files which are generated to this thread.
    Regards,
    Ankush

Maybe you are looking for

  • Pictures in iPhotos

    Hi, for some reasons the pictures in my albums became very small. like very small thumbnails whereas before they were quite bigger. I don't know how to revert back to normal. Anyone knows? Thx

  • Unsolvable Screen Sharing Authentication Error

    Here's my scenario... I have three Core2Duo iMacs (Let's call them "A" "B" and "C") on a local appletalk network all communicating fine in all directions via an Airport Extreme base station. When it comes to logging into each machine via file sharing

  • Function Module in VC

    Im using Function modules in VC to get data from SAP BW/BI . My function module is working perfectly fine in the backend in SE37. Its returning data the way i want it. But when i add that to VC & right-click on it and do Test Data Service & give the

  • How prevent iMessage receiving TANs from mobile banking?

    Hi all, in online banking it is customary to use two-factor authentication by sending a mobile TAN to the user's mobile phone. Now, with the SMS integration of iMessage that came with the Yosemite update, these TANs are also showing up in iMessage. S

  • Finding location of WEB-INF on Weblogic (unix) via backing bean

    Hi all, In 11g on the embedded WLS 10.3, running in XP, I'm able to get the path of the WEB-INF directory using:     public String getPath(){         ExternalContext ectx = FacesContext.getCurrentInstance().getExternalContext();         String reques