Firefox 4.01 various problems - Any Ideas please?

OK so I have had Firefox 4.01 Installed for several days now and it is certainly far from the best browser I have used is a fair statement I think. I have tried 4.0 and that lasted less than 5 minutes! 4.01 is here and I am SO trying to get it to work and am failing fast. But still here and trying to find ways to get around the many problems. But I STILL fail to see why the Lads and Lasses at Mozilla see the need to change the tables and bring out a totally unstable browser which simply is not up to the usual standards that all (well OK nearly all apart from a few notable exceptions?) the rest of Fire fox version have been.
My problems range from:
On Opening a New version of the FF browser I get at least 9 different browsers open, NOT 8 or !) but always 9?
I also get a copy of a Poker Site opening it's doors and inviting me in to play? I think this is a popular one as It opens at several sites when browsing ordinarily.
On being asked if I would like to save a particular password a pop up appears for the site. Now nothing untoward in this ? Except that it ONLY opens for certain sites. No rhyme or reason why it does it simply does, I can do what the heck I like though as it doe's NOT disappear when I chose my option be it yes or no or maybe. It does not close and as it is over the options tab for Firefox the only way to be rid is to actually close Firefox from the red cross and open it again, I then get the 9 lots of browsers open as well.
On closing Firefox it also opens as a Fire Fox page, no home page (Google Menu page for Google .co.uk) as it is set. Just a blank Fire Fox page.
And instead of opening at all the pages I had open as before it opens as I say the 9 different browser pages and none of them are even home pages.
I open another page in another window, I get the open window but nothing will open i it at all. Not the page I want to and none of the pages I bookmarked no ages at all just an open page.
Bookmarks, while we are on the subject, Bookmarks do not open as you would expect them to, hard to explain this one, bu Bookmarks do not open as you expect them to. I simply cannot explain how they open as I simply cannot remember as my memory is so bad. But suffice to say something is wrong with them also.
Add Ons, like the spelling/Dictionary British one. It has ALWAYS closed when it wants to. I check words and get say out of 100 words 10 are misspelled. I go to correct them and after I have corrected the first word it closes down? I.E. it stops highlighting words. I take out the checkmark for Spelling and then open it and check it again and then it seems to work OK checking all misspelled words OK. But it also misses some words too? Like it may see the word so and it spelled sol and it checks it and you can correct it. BUT it may see the misspelled word of spl (Sol)and that is certainly NOT a word! BUT it may not at first check it as a misspelled word? OK this time it has and may be next time I see a misspelled word I can point it out? But it ode also go wrong. And this is again something i am NOT familiar with as my memory is so bad I sometime forget how to spell words! But I do know as soon as I see them they ARE misspelled!
See my problem is I send them to Mozilla or whomever it is as a feedback report and It seems NOTHING is done!!! Now what gets me is IF the basic programme works 99% WHY is the new one so bad?? Where only 80% of it works as it is supposed to?? It is not good for the people who plan it out and is certainly not good for us who use it!! I am so far SO dis-enamoured with Fire Fox I am SERIOUSLY thinking of going to another Browser! And it is about as far as it can get before I do!! So PLEASE someone can they at least TRY and reply to this message and tell me some one is doing something....well not just me but ALL users of Fire Fox and MOZILLA products as there is going to be a mass exodus of users away from all this stands for and has stood for for years now! We are NOT imbeciles and please do not treat us as such! You MAY be very clever and are able to pu something like this together BUT you ARE human beans as well and never lose sight of that!
Give us something to look forward to!
Yours Aye
Chris Goddard

I checked the crash reports but could not establish the cause of the crashes. The number of tabs open is unlikely to have an impact upon this.
One of the associated bug reports indicates that it may be related to extensions. Try the procedure in the following link to start Firefox in safe mode and see if it still crashes. If it does not crash in safe mode it indicates that an extension may be causing this.
https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • Firefox hangs every time I load Google, no other sit is a problem, any ideas please?

    Detaisl are pretty much as above, for some reason when I use Google search, my deafult search engine. Firefox hangs. The only way I can get it going again is to claose the browser, I then get a not responding message from windows. Then start the browser again. I get the session restore window, untick the tab for Google and evrything starts OK.

    This pops up over or in addition to the normal home page, or replaces your normal home page?
    Since multiple browsers are affected, you may have some system-level malware, or multiple unwanted extensions.
    You may want to run some supplemental scans. These three tools are highly regarded (and free):
    * Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
    * SUPERAntiSpyware : http://www.superantispyware.com/
    * AdwCleaner : http://www.bleepingcomputer.com/download/adwcleaner/ ''(ignore banner ads for other products)''
    Then disable ALL nonessential or unrecognized add-ons on these two tabs:
    orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    Exit and restart Firefox to finish that phase of the clean-up.

  • I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

    I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

    Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

  • I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
    The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
    However, I can not get a AV chat working to a real user....
    In response to your suggestions:-
    I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
    The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
    Internet sharing is off.
    I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
    I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
    Thanks again

  • TS1459 Win 7 , itunes store will not accept Apple ID, on the diagnostic program says secure link failed spoke to tec.dept they say Win security problem ,, turned all off problem still the same any ideas please

    TRYING TO AUTHORIZE MY COMPUTER>>>>>>>on the diagnostic program says secure link failed spoke to tec.dept they say it's a Win security problem ,, turned all off problem still the same any ideas please Ipad ,
    (((Strange thing is Apple want me to purchase assistance to enable me to buy from thier store)))

    You should send this to Apple.

  • I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion - NOT Mountain Lion. Tried all available software updates - no joy. Any ideas please?

    I can no longer import raw files from my Panasonic Lumix LX5 into Aperture 3.3.2 - raw files from my other Canon cameras are fine. Am still running Lion (10.7.4) - NOT Mountain Lion. Tried all available software updates - all up to date apparently but still no joy. OS X Lion shows the LX5 as a supported file format. I dont want to have to upgrade to Mountain Lion just to see if this solves the problem. Any ideas please.

    Since when did this happen? Directly after you upgraded to Aperture 3.3.2?
    If it happened directly after the upgrade the problem may be, that the raw support for your camera got lost. For some posters it helped to register the raw support again, see this post by Alan Roseman:
    Aperture 3 preview of raw file greenish
    If this does not help, you may need to reinstall Lion to bring back the raw support.
    But if the problem occured independent of a new installation, ypu may have a problem with your camera or the card you are using. Have you tried to use a different card or to reformat the card in the camera?

  • I have just recieved a brand new ipod touch 8GB, it wont turn on and it wont either charge or recognise connection through ITunes. I have tried the hold down home and the power button together but no luck. Its absolutely dead, any ideas please ????

    I have just received a brand new IPOD Touch ,it will not turn on, i have connected it to my cmputer, it does not show that its charging and is not recognised in Itunes. I have tried the holding down the power and home buttons which also didnt work. Any Ideas Please ????

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar    

  • I have tried with my ipad air and a friends ipad to mirror the contents to a samsung smart tv via appletv and cannot either to work.I have spent over 2 hours today on live chat with apple support with no resolution.Any ideas please?

    i cannot mirror from ipad or ipad air to a samsung smart tv via appletv.Any ideas please?

    I have tried with an Ipad Air and Ipad using Op System 8.0.2 to mirror their contents to the screen of my Samsung Flat Screen Flat TV via the latest make of Appletv.I have spent over 2 hours going through all settings etc with Apple Customer Service Live Chat.They cannot find or replicate the problem and says it is all working fine.My TV screen displays, when i go into mirroring,  "ready for connection - on your device launch Allshare Cast".Nothing happens although i have agreed with Apple Support that all settings are on and are correct.Can anyone help please, as Apple Support cannot?

  • First post for me I have just updated ipad to ios8 and now I can't sync music from my Mac to it witch is running latest itunes it starts to sync then stops straight away with no info why as anyone got any ideas please?

    First post I have just updated iPad to latest iOS and now I can't sync my music in iTunes form Mac which is running latest  version it starts but stops straight away and gives no info I've tried with wifi off  and on turned everything off and back on but nothing as any one got any idea please ?

    I have the exact same problem! It started this month, I don't know what to do

  • My files are all there and open in Preview but in Numbers they come up blank. Same in Pages. Any ideas please? My Mac was stopped suddenly by a power cut. Could this be relevant? Help please. Jon Sims

    My files are all there and open in Preview but in Numbers they come up blank. Same in Pages. Any ideas please? My Mac was stopped suddenly by a power cut. Could this be relevant? Help please. Jon Sims

    "My Mac was stopped suddenly by a power cut. Could this be relevant?"
    Sounds very relevant.
    Do you have access to another computer with Numbers installed?
    If so, do your files open properly on that computer?
    If so, then the problem is your computer itself, which is best posted in a different forum.

  • Thereis no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected.  any one any ideas please.

    there is no sound on my macbook air. I have checked the volume and mute controls and the internal speaker are selected.  any one any ideas please.

    Hopefully one of these steps should solve the problem.
    1. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    Best.

  • Any idea please!!!

    i have sent this to bb to see if anyone can help.
    i have sent many messages over the last few months inc this one below!!!!
    a while back I registered to the blackberry site and app world no problems for ages and now I can’t log in via appworld or anything on my phone or the net on my laptop.so I try changing passwords,still no use.it says my account is no longer valid so I
    re register no luck either it tells me my email address is already in use!!!! any ideas please
    sarah
    and now all im getting when i try to log in is,even when i have tried uninsatalling appworld and downloading again/changing passwords,which apparently was sucessful.
    but when i try to log in after activating my account.the same thing always appears,has anyone any idea why this may be happening as i have never had any problems before
    things like this ---->
    Username is an invalid email format. Please provide a valid email address to continue.
    and also it says invalid username which its not

    i forgot to mention my bb is a torch 9800.i did get emails back from bb but nothing resolved this issue.
    then i log in and it says this email address is not valid.
    other times it says its ok but wont let me log in atall even if i have changed my password and username.
    dont know why im logged in now?
    but if i log out it wont let me in again

  • HELP!  I had iPhoto on my mac, for some reason it was not responding down loaded a new version but can't find my photos. any ideas please.  I thought once on the mac always on the mac.

    HELP!  I had iPhoto on my mac, for some reason it was not responding or damaged.   down loaded a new version but can't find my photos. any ideas please.  I thought once on the mac always on the mac.

    Sorry but we need details to help
    What version of the OS do you have? What has changed since iPhtoo worked?
    What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
    look in your applications folder - is there an Iphoto application there? If so get info and report the version
    Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
    what else can you tell us that might help us assist you?
    LN

  • I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". Ihave re-installed but still receive the same message. Any ideas please.

    I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". I have re-installed but still receive the same message. Any ideas please.

    Make sure your user account has full administrative permissions.  Then, at this stage of the game, I would take the following steps:
    - Re-create the Preferences file following these instructions:
    Re-create the Photoshop Elements preferences file to eliminate problems that a damaged preferences file might cause.
    Note: When you use this solution, Photoshop Elements will create a new preferences file and you will lose custom settings associated with your current preferences file. However, the file you rename in step 2 is your original preferences file. If you determine that the preferences file is not causing the problem, then you can restore your custom settings by undoing the instructions below.
    To re-create the Photoshop Elements preferences file:
    Quit Photoshop Elements.
    Locate the Adobe Photoshop Elements preferences files. In Photoshop Elements 5.0, there are two preferences files, one for Organizer and one for Editor:
    Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Organizer\psa.prf
    Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Editor\Photoshop Elements 5 Prefs.psp
    Rename the extension for the files (for example, to psa.old).
    Start Photoshop Elements. Photoshop Elements creates a new preferences file.
    I doubt that this will fix your problem, however, it is always the first thing to try.  If it does not, take these steps:
    - Uninstall Photoshop Elements
    - Run the Windows Installer CleanUp Utility (http://support.microsoft.com/kb/290301)
    - Reinstall Elements
    - Reinstall the 5.0.2 patch
    Good luck,
    Juergen

  • When i try to use facetime on my imac it comes up with facetime not responding and starts to use nearly 2gb of memory. Any ideas please?

    when i try to use facetime on my imac it comes up with facetime not responding and starts to use nearly 2gb of memory. Any ideas please?
    Also messages does the same thing

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

Maybe you are looking for

  • Move Game Center profile from one apple ID to another

    Hi, To access my game center profile (achievements and challenges etc...) I have to remember to login to an old appleID I don't use anymore for anything significant except game center. My other appleId (which is my iCloud account) has everything on i

  • Report for Transporter Details.

    How to create a customize report to capture the transporters details and the quantity supplied and amount of the materials received against the PO. PO includes both the supplier and transporter.

  • [Acrobat X Standard] The tool box doesn't work. Please help!

    [Acrobat X Standard] The tool box doesn't work. Please help! I have a Acrobat X Standard. When I open the documents, I can't click the tool box. but when I don't open the documents, I can use the tool box. To solve the problem, 1. reinstall the menu.

  • Does the AS2 adpater is included by default in the SOA suite 11g or BAM

    Hi, I wanted to know that does the AS2 adpater comes by default with the SOA Suite 11g package or with BAM or we do need to have a seperate licensing for the adapter. Thanks in Advance, Jignesh

  • BPC: EvDre filter on dimension properties

    Hy, I'm having some problem  building an "aggregate" evdre. I've to produce a report showing data from two or more entity basemembers choosed on the base of the area_manager property value, so I'm trying to generate the members list using EvEne, EvSe