Firefox 4.1 and Firefox 11.1 do not work correctly on my systems
<pre><nowiki>From : <[email protected]>
To : support.mozilla.com
Subject : Firefox Version 11.1 Does Not Work for Me
Date : Sat, 24 Mar 2012 18:45:39 GMT
Spell Check in your version 11.1 is just as impeding in my three systems as was 4.1.
(Note the string below.) I have returned to 3.6.28, and will refuse to upgrade your
program in the future until Mozilla can demonstrate that the newer versions will not
impede when the user attempts to spell check in email.
Thank you.
[email protected]
From : [email protected]
To : [email protected]
Subject: Please confirm your email address
Date: Fri, May 06, 2011 11:21 AM
Welcome to support.mozilla.com.
Before you can use your new account you must activate it -
this ensures the e-mail address you used is valid and belongs
to you. To activate your account, click the link below or
copy and paste the whole thing into your browser's location bar:
https://support.mozilla.com/en-US/users/activate/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Once you've successfully activated your account, you can throw
away this e-mail.
Thanks!
The support.mozilla.com team
Downloading the new Version 4 stripped out my dictionary, so none of my email send.
What's
up with that?
You can see which dictionary is selected if you right-click in a text area and open the
Languages submenu.
You can open the "Add Dictionaries" link to install a dictionary if you do not
have one.
Make sure that [X] "Check Spelling" in the right-click context menu has a tick.
You can enable or disable spell checking globally:
Firefox > Preferences > Advanced : General: Browsing: "Check my spelling
as I type"
See also:
http://kb.mozillazine.org/Spell_checking
KingGhidorah 1 solutions 1 answers
1 month ago
https://addons.mozilla.org/en-US/firefox/addon/united-states-english-spellche/
Added this and it works (again) like a charm.
From : [email protected]
To : [email protected]
Subject: Solution found to Firefox Help question
Date: Fri, May 06, 2011 12:27 PM
Hi mjattie,
We just wanted to let you know that KingGhidorah
has found a solution to a Firefox question that you're following.
The question:
Spell checker not working since FF 4 was marked as solved by its asker, djf42.
You can view the solution using the link below.
Did this answer also help you? Did you find another post more
helpful?
mjattie: No!!
Let other Firefox users know by voting next to the answer.
https://support.mozilla.com/questions/800727#answer-162639
Unsubscribe from these emails:
https://support.mozilla.com/unsubscribe/385490?s=xxxxxxxxxx
mjattie: Nope! Still does not work. I am running XP Might that be the problem?
djf42: Sorry my suggestion hasn't worked for you. Not being a computer wizz can't help
you further.
Perhaps the back room boys at FF can step in and help, I'm sure that they wouldn't want
you to go backwards in the versions.
mjattie: I was perfectly happy with 3.6.17 (all of the 3s by the way.) How do I get in
touch with the back room boys at FF?
From : [email protected]
To : [email protected]
Subject: Reply: Solution found to Firefox Help question
Date: Sat, May 07, 2011 11:47 PM
Date: Sun, 8 May 2011 06:46:44 GMT
From : [email protected]
To : [email protected]
Subject: Re: Reply: Solution found to Firefox Help question
Date: Sun, May 08, 2011 11:51 AM
Hi, djf42. I have found the 3.6.17 installer, have reinstalled it, and I am now
perfectly happy.
One of these days, Mozilla will come out with 4.02 with this problem fixed (hopefully).
I will
then give it a try. Thanks for your help.</nowiki></pre>
This problem occurs on the Juno webmail site?
I assume you are doing something different than just correcting the squiggly red underlined words. How are you spell-checking the email: using an add-on or using a feature of the Juno webmail site? If it's an add-on, which one is it?
Similar Messages
-
I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help
Reset the NVRAM/PRAM and Reset the SMC, then try again.
-
I am using firefox 24.0 and my facebook page is not showing correctly
in my pc facebook webpage is not showing correctly but i have tried in another pc at there my fb page is showing correctly
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I've spent over a month and a half trying to fix my non-booting Satellite A215-S5818 running Vista. Sometime mid-March (ah, the Ides of March!) I think I downloaded an automatic update and I remember the next time it booted my desktop was black; icons but no background picture. Then I noticed on the bottom right it was saying my copy of Vista was not genuine. I know that it is, because it is pre-installed. So I ran check disk from the Properties page of C: in Windows Explorer. After it ran, I got BSOD. At first I just booted into SafeMode and tried to disable whatever hardware/uninstall whatever software was causing the problem. I think I got it to boot in SafeMode once or twice, then no more. For a while I kept getting IRQL-NOT-LESS-OR-EQUAL, but I somehow stopped that through the command prompt(forum advice?). Startup Repair could not fix it, System Restore would not work on ANY restore points, even before March. The new BSOD error was:
"STOP: c000021a {Fatal System Error}-
The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x00100594)"
From then on I could only get a command prompt through the Repair Console. So I xcopy-ed my Users directory to an external hard drive and grudgingly booted from the Toshiba CD, knowing it would obliterate everything, but I was desperate. I got the 03-EEEE-0000 error. Now I have a plethora of useless(?) CDs and DVDs I have burned ISO images on of any Freeware I thought could fix it, downloaded from the Internet using my husband's Windows 7 desktop computer. I followed these instructions to the letter and it worked (I guess; it started immediately, no DOS objection), but when it rebooted I got a window (!) saying something about the type of hardware. I haven't added or changed any hardware, but I have updated the BIOS recently. So I clicked OK (no other choice), and now every boot up I get a window saying "Windows could not complete the installation. To install Windows on this computer, restart the installation". Startup Repair does not find any problems. Could it be the BIOS? I have re-flashed it twice, no difference.Oops! Sorry that was stupid on my part.
From the command prompt you could type in systeminfo , and hit the 'Enter' key, it will take a little while to run, when it finishes, scroll back up to the top and you'll see OS Version and Service Pack you've got loaded. But, if you're booting off the recovery disk, that's the system info you'll get.
If you can't get to the command prompt from the Advanced Boot Options menu, by trying to boot off the hard drive, and pressing F8, I'm not sure how you can find what Service Pack you have loaded.
By using the Recovery Boot Disk, have you exhausted all the recovery options that Jerry linked before?
What are the system recovery options in Windows Vista?
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair start...
Mike -
Word documents (New and Existing) paper area does not work correctly
Hello all. I have a rather hard to explain situation with one of our workstations. It is an HP 8760w and it has had Office 2010 installed on it for quite some time. Currently, when opening a new document or any existing document, the program will look normal
but will not show a cursor on the page. Scrolling wll result in the page looking obscure as if a graphics inside the document stops working. Scrolling will cause lines of text to melt into each other and will duplicate lines of text. The ribbon functions fine
and hitting File brings up the entire menu like it should. Switching back to the document will show what was over that section in the file menu. How do I fix this? Installing and uninstalling office did not work along with changing the Normal.dot and deleting
the Data registry file.
All help is appreciated greatly.Hi Travis,
This sounds more like a Graphic Driver or Graphics Card problem. You might try switching out the Graphic Card if that is possible on the system.
Another outside possibility might be a corrupt user profile, so you could create a different profile on the machine and try it. However, my guess would be the Graphics Card is failing.
Are you also certain there are no other Office add-ins loaded that might be causing this. Start Word in Safe Mode and see if this clears the problem. If it does, then systematically disable add-ins one at a time until the culprit is found.
Hope this helps
Kind Regards, Rich ... http://greatcirclelearning.com -
FireFox web buttons and movie scroll bar do not work anymore!
== Issue
==
Firefox is having problems with certain web sites
== Description
==
When watching movies after choosing Maximize movie to full screen movie controls no longer work. You must first hit ESC to get out of full screen mode before controls work again. I have seen this on 3 different sites. This is a new problem. And the problem seemed to start after FireFox prompted me to download a new version of Flash.
<blockquote>Please don't post clickable links to XXX-rated material in this forum.
Space now inserted in that link - edited by a moderator - eh</blockquote>
== URL of affected sites
==
<blockquote>Do not post links at all to porn -MJB</blockquote>
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.6
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Java Console
6.0.16
true
Java Console
6.0.17
true
Java Console
6.0.18
true
Java Console
6.0.19
true
Java Console
6.0.20
true
Firefox Showcase
0.9.5.5
true
{89506680-e3f4-484c-a2c0-ed711d481eda}
DVDVideoSoft Menu
1.0.1
true
DownloadHelper
4.7.3
true
Adblock Plus
1.2
true
Download Statusbar
0.9.6.8
true
SweetIM Toolbar for Firefox
1.0.0.10
true
Norton IPS
2.0
true
Norton Toolbar
4.6
true
{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}
Search Helper Extension
1.0
true
{27182e60-b5f3-411c-b545-b44205977502}
Adobe DLM (powered by getPlus(R))
1.6.2.63
true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.igoogle.com
browser.startup.homepage_override.mstone
rv:1.9.2.6
extensions.lastAppVersion
3.6.6
keyword.URL
http://search.sweetim.com/search.asp?src=2&q=
network.cookie.prefsMigrated
true
places.last_vacuum
1273928725
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SIMBAR={9CDB2A64-E417-42DF-83F2-1B302E1DA08A}; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET CLR 1.1.4322; .NET4.0C; .NET4.0E; InfoPath.3; Creative AutoUpdate v1.40.01)Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
SSH and Ping to WAN IP not working correctly.
Hey all!
I've run into an issue that i cant seem to figure out. For some reason i can't SSH to my router, and i also cant ping the WAN IP addresses, which i need for my monitoring service. This ones got me stuck so any help is very much appreciated. Here is my sanitized config. Thanks!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip domain name xxxxxxx
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
crypto pki token default removal timeout 0
username admin privilege 0 password 7 xxxxxxxxxxxxxxxxx
redundancy
interface FastEthernet0/0
ip address xx.xx.xxx.xxx 255.255.255.240
ip access-group OutsideIn in
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1
no ip address
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.10
encapsulation dot1Q 10
ip address 10.10.100.60 255.255.0.0
interface FastEthernet0/1.20
encapsulation dot1Q 20
ip address 10.34.1.1 255.255.240.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.30
encapsulation dot1Q 30
ip address 10.60.0.1 255.255.252.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.31
encapsulation dot1Q 31
ip address 10.31.1.2 255.255.0.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.32
encapsulation dot1Q 32
ip address 10.32.1.2 255.255.0.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.33
encapsulation dot1Q 33
ip address 10.33.1.1 255.255.0.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.50
encapsulation dot1Q 50
ip address 10.50.1.2 255.255.0.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.51
encapsulation dot1Q 51
ip address 10.51.1.1 255.255.0.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.52
encapsulation dot1Q 52
ip address 10.52.1.1 255.255.0.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.53
encapsulation dot1Q 53
ip address 10.53.1.1 255.255.0.0
ip helper-address 10.34.1.7
no ip redirects
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.54
encapsulation dot1Q 54
ip address 10.54.1.1 255.255.0.0
ip helper-address 10.34.1.7
no ip redirects
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.55
encapsulation dot1Q 55
ip address 10.55.1.1 255.255.0.0
ip helper-address 10.34.1.7
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.56
encapsulation dot1Q 56
ip address 10.56.1.1 255.255.0.0
ip helper-address 10.34.1.7
no ip redirects
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list 100 interface FastEthernet0/0 overload
ip nat inside source static tcp 10.34.1.155 8020 interface FastEthernet0/0 8020
ip nat inside source static udp 10.34.1.155 8020 interface FastEthernet0/0 8020
ip nat inside source static tcp 10.34.1.155 8025 interface FastEthernet0/0 8025
ip nat inside source static udp 10.34.1.155 8025 interface FastEthernet0/0 8025
ip nat inside source static tcp 10.34.1.165 8030 interface FastEthernet0/0 8030
ip nat inside source static tcp 10.34.1.165 8035 interface FastEthernet0/0 8035
ip nat inside source static udp 10.34.1.165 8035 interface FastEthernet0/0 8035
ip nat inside source static udp 10.34.1.165 8030 interface FastEthernet0/0 8030
ip nat inside source static tcp 10.34.1.156 8010 interface FastEthernet0/0 8010
ip nat inside source static udp 10.34.1.156 8010 interface FastEthernet0/0 8010
ip nat inside source static tcp 10.34.1.156 8015 interface FastEthernet0/0 8015
ip nat inside source static udp 10.34.1.156 8015 interface FastEthernet0/0 8015
ip nat inside source static tcp 10.34.1.3 8061 interface FastEthernet0/0 8061
ip nat inside source static udp 10.34.1.3 8061 interface FastEthernet0/0 8061
ip nat inside source static tcp 10.34.1.3 8062 interface FastEthernet0/0 8062
ip nat inside source static udp 10.34.1.3 8062 interface FastEthernet0/0 8062
ip nat inside source static tcp 10.34.1.3 8063 interface FastEthernet0/0 8063
ip nat inside source static udp 10.34.1.3 8063 interface FastEthernet0/0 8063
ip nat inside source static tcp 10.34.1.3 8064 interface FastEthernet0/0 8064
ip nat inside source static udp 10.34.1.3 8064 interface FastEthernet0/0 8064
ip nat inside source static tcp 10.34.1.3 8065 interface FastEthernet0/0 8065
ip nat inside source static udp 10.34.1.3 8065 interface FastEthernet0/0 8065
ip nat inside source static tcp 10.34.1.3 8066 interface FastEthernet0/0 8066
ip nat inside source static udp 10.34.1.3 8066 interface FastEthernet0/0 8066
ip nat inside source static tcp 10.34.1.7 3389 interface FastEthernet0/0 3389
ip nat inside source static tcp 10.34.2.87 80 interface FastEthernet0/0 80
ip nat inside source static udp 10.34.2.87 80 interface FastEthernet0/0 80
ip nat inside source static tcp 10.34.1.16 80 interface FastEthernet0/0 8045
ip nat inside source static udp 10.34.1.16 80 interface FastEthernet0/0 8045
ip nat inside source static tcp 10.34.1.17 80 interface FastEthernet0/0 8055
ip nat inside source static udp 10.34.1.17 80 interface FastEthernet0/0 8055
ip nat inside source static tcp 10.34.1.18 80 interface FastEthernet0/0 8056
ip nat inside source static udp 10.34.1.18 80 interface FastEthernet0/0 8056
ip route 0.0.0.0 0.0.0.0 (NEXT HOP)
ip access-list extended OutsideIn
permit ip any host xx.xx.xxx.xxx
permit ip any host xx.xx.xxx.xxx
deny udp any any eq 1723
deny tcp any any eq 1723
deny udp any any eq isakmp
deny tcp any any eq 500
deny udp any any eq non500-isakmp
deny tcp any any eq 4500
permit tcp any host (WAN IP) eq www
permit tcp any host (WAN IP) eq 8010
permit udp any host (WAN IP) eq 8010
permit tcp any host (WAN IP) eq 8015
permit udp any host (WAN IP) eq 8015
permit tcp any host (WAN IP) eq 8020
permit udp any host (WAN IP) eq 8020
permit tcp any host (WAN IP) eq 8025
permit udp any host (WAN IP) eq 8025
permit tcp any host (WAN IP) eq 8030
permit udp any host (WAN IP) eq 8030
permit tcp any host (WAN IP) eq 8035
permit udp any host (WAN IP) eq 8035
permit tcp any host (WAN IP) eq 8045
permit udp any host (WAN IP) eq 8045
permit tcp any host (WAN IP) eq 8055
permit udp any host (WAN IP) eq 8055
permit tcp any host (WAN IP) eq 8061
permit udp any host (WAN IP) eq 8061
permit tcp any host (WAN IP) eq 8062
permit udp any host (WAN IP) eq 8062
permit tcp any host (WAN IP) eq 8063
permit udp any host (WAN IP) eq 8063
permit tcp any host (WAN IP) eq 8064
permit udp any host (WAN IP) eq 8064
permit tcp any host (WAN IP) eq 8065
permit udp any host (WAN IP) eq 8065
permit tcp any host (WAN IP) eq 8066
permit udp any host (WAN IP) eq 8066
permit ip any any
ip access-list extended nat
permit ip any any
logging esm config
logging 10.34.1.7
access-list 50 permit (OUR WAN NETWORK) 0.0.2.255
access-list 100 permit ip any any
control-plane
mgcp profile default
line con 0
logging synchronous
line aux 0
line vty 0 4
logging synchronous
login local
transport input all
line vty 5 988
logging synchronous
login local
transport input all
scheduler allocate 20000 1000
endHardware is MV96340 Ethernet, address is 0022.551a.3b80 (bia 0022.551a.3b80)
Internet address is XX.XX.XXX.XXX/28
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 4/255, rxload 44/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/1670/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 17259000 bits/sec, 1788 packets/sec
5 minute output rate 1728000 bits/sec, 1350 packets/sec
87395905 packets input, 766557199 bytes
Received 1332539 broadcasts (0 IP multicasts)
0 runts, 0 giants, 96 throttles
25676 input errors, 0 CRC, 0 frame, 0 overrun, 25676 ignored
0 watchdog
0 input packets with dribble condition detected
126794802 packets output, 2276449807 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
FastEthernet0/1 is up, line protocol is up
Hardware is MV96340 Ethernet, address is 0022.551a.3b81 (bia 0022.551a.3b81)
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
reliability 255/255, txload 42/255, rxload 4/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/6376/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1701000 bits/sec, 1317 packets/sec
5 minute output rate 16522000 bits/sec, 1712 packets/sec
129134088 packets input, 3150074778 bytes
Received 1290762 broadcasts (0 IP multicasts)
0 runts, 0 giants, 383 throttles
101275 input errors, 0 CRC, 0 frame, 0 overrun, 101275 ignored
0 watchdog
0 input packets with dribble condition detected
87242554 packets output, 1114685246 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
31588 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
1 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out -
Just did security update and restated now monitor is not working correctly
Just did the latest security update (didn't catch the specific number), restarted my 1.83 GHZ macbook white, intel chip. Running 10.4.11.
Monitor from has what appears to be scan lines at the bottom and are slowly creeping up the screen!
Any help would be appreciated, don't know if I can undo the update somehow, or if it is a driver conflict?does an external monitor work(with descrete or optimus only since integrated doesnt drive the panel), if so, then it might be a display issue. if not, then check resolution and refresh rate.
looks kind of like my monitor did when the resolution was wrong(computer tried 1366x768 on an FHD display)
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac. -
I have iphone 5 And my phone icon is not working correctly
I have a iPhone 5 and I am having an problem with it that when I click on phone App and it doesn't work for example I have an pre paid sim and when I enter that pin then it doesn't work I hope you guys can help me solve my. Problems thanks
We're all in the same boat, more or less. iOS 8.1 was supposed to fix Bluetooth issues (among other things) that appeared with the release of iOS 8.0.1 that iOS 8.0.2 didn't fix, and, well, they're still there...
A fix is probably on the way, already, but when will Apple release it, no one know... -
the pictures don't want to be "active" when you highlight or click the colors, the color should change and they don't. Also if i click on the item and go into its own section the pictures don't come up. I also cannot select a size of the item or add to cart(says error adding). This is one of the few that does it. Some other websites will not play videos, it acts like there is no media to be played when this happens as the area is boxed off but the box stays completely blank. i have upgraded to mavericks today, i have reinstalled java, i have reinstalled browsers(it is the same across all browsers) any ideas of the culprit? it does work on mac(as i have another startup disk it works fine on. the problem is none of my information is on that hard drive(pictures, itunes data, etc)
Hey, guys, I have solved my own problem.
I unplugged the Apple TV (there is no off switch) and let it rest overnight. When I plugged it in again, it re-booted (I suppose) and, anyway, Airplay works now.
Ralph aka beppi6 -
Help! Working with Kethley GPIB and NI DIO-24 does not work correctly.
Who encounter the same problem ?
tahnks a lot david.If you are using LabVIEW Instrument Drivers, the following KnowledgeBase may be useful to you: http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/3aa9f0de80c495d386256b98005efba7?OpenDocument.
However, if that is not helpful, I would suggest contacting Keithley for help. It sounds as though the driver for the card may not be compatibable with the Instrument Driver and you may need to do additional programming. Good luck!
-Heather S.
Applications Engineer
National Instruments -
Some of the browser tabs and headers that are "clickable" are noe working. I click on them, and nothing happens. Part of Facebook works, but the headers do not. My library site headers, which has tabs for "Search" and "Account" as examples, do not work. Up till late yesterday, there were no problems. I did re-install Firefox this morning, and it made no difference.
The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I am using WIndows 8 RP. Firefox used to work fine till yesterday. Yesterday I got a message that Firefox is updating, and since then I could not start Firefox again.
As the window starts and crashes there is no way I can see any error message.
I uninstalled Firefox, downloaded, and reinstalled again.
But no use, the problem persists.'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Current version of firefox shows "Digital persona(fingerprint reader) extension is incompatable with firefox 4.0b7" and many more extension which is working in firefox 3.6 also not compatable with this version what should we do because this extensions are very useful for me in my laptop
I got this reply from DigitalPersona:
"DigitalPersona made the decision late last Spring, to discontinue the Personal products. There will be no further revisions." -
When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen
Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.
Maybe you are looking for
-
Install Canon MP470 That is connected to my Windows XP Professional PC
I have a Canon MP470 printer that is connected to a Windows XP computer on my local network. I can get the printer connected to my Mac by going into Applications, System Preferences, Print & Fax, + Sign, Windows, etc.... BUT - There is no driver for
-
Maintain JCO destination button is disabled
I am getting the following error when trying to log in to MSS: "com.sap.tc.webdynpro.services.exceptions.WDRuntimeE xception: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined
-
Hi, I'm trying to use suspend&resume plugs in a WDA application to call an external ITS Service and then to go back to my application by clicking BACK button in the browser. the url that I try to call is http://zzzzz:1111/sap/bc/gui/sap/its/BBPMAININ
-
Don't think my iPod loves me anymore - please help
A while ago I had no problem copying music onto my iPod. I have been away from it for a while but now it only appears to copy the first 20 seconds or so of any CD track. Its as though I have it set to some kind of 'intro mode' but can't find how to c
-
Using the iphone S App for optimum. Precisouly every 1/2 hr the connection to the App shuts off. WHY ??? Bud