Firefox 4 and Windows 7 x64 Ultimate

Does Firefox 4 have separate version for Windows 7 x64 Ultimate?

Hello, I my ID is durestudios from the Mozilla Firefox Chat Contributors group. Your following problem may be solved, but I will have to try to fix the problem in many ways. I'm sorry if that can bug you.
My best recommendation is to chat (It's free to use, and you don't have to download anything. All you need to do is go to:
http://support.mozilla.com/en-US/kb/Live+Chat?new_chat
and chat *WHEN CONTRIBUTORS ARE ONLINE*. There is a time schedule on this at the side of the page.
First: Try deleting your cookies and cache. This can be done by clicking the Tools tab of the top of your Mozilla Firefox page, then clicking 'Clear Recent History' on the box that appears, under 'Start Private Browsing'. Then a box will appear. On the top of that box, it says 'Time range to clear' and next to it has a view of options. click on that view of options (It's a box) and 5 options will appear. Click on 'Everything'. After that, on the bottom of the 'Clear Recent History' box, there is a button next to the word 'Details'. If there is a white box under the word 'Details' don't click on the button next to the word 'Details'. If there is no white box under the words 'Details', click on the box next to 'Details'. Now, un-check everything (click on the small box next to the words in the small box, if you click that small box a small check appears. When the check appears, it will be 'checked', and if there is no check in the box it will be 'UN-checked'.) except 'cookies' and 'cache'. For 'cookies' and 'cache' check them. Now press 'Clear Now'.
If this doesn't work, chat with anyone at the Firefox one-to-one direct chat.

Similar Messages

Using USB for Bitlocker in a Bootcamp install of Windows 7 x64 Ultimate on early-2011 Macbook Pro

First of all some details on my current setup:
Macbook Pro 15" (early 2011) with a i7 QM processor and 8 GB RAM, Superdrive and HD installed
Mac OS X 10.7.3
Windows 7 x64 Ultimate in a Bootcamp setup
Existing partitions on HD are EFI, MacOS X, Bitlocker Startup, Windows
I removed "Recovery HD" after creating DVD image contained in latest Lion installer from AppStore.
What I got so far:
It took some time to find a way for Windows getting a second partition to be used for Bitlocker startup files. Using existing partition layout I replaced previously existing "Recovery HD" partition for Bitlocker partition in Windows (after taking dd-based image of Recovery HD).
Recently I tried to enable Bitlocker and continued to fail on Bitlocker System Check claiming to have no access on USB while booting. And that's my issue ...
I read about using Windows' diskpart to have a GPT partitioned USB stick containing single NTFS partition. I tried to achieve the same with disk management in Mac OS X though it was creating a hybrid MBR/GPT setup that wasn't recognized by Windows at all. Then I tried partitioning in Mac OS X to have GPT partitioning, used Clonezilla Live CD's gdisk to apply hybrid setup another time. I even tried to do the whole partitioning in Linux using gdisk, but Windows still didn't recognize the formatted partition on USB stick then. So, the only way found is using diskpart in Windows to get a GPT-based USB-stick with a single NTFS partition.
I put my startup key there (attributed as hidden, system file) and tried to restart several times. On every boot Windows is prompting for inserting valid startup key as it wasn't found. The partition is encrypted already and entering the printed 48 digits recovery key gets me in every time.
If I keep the stick inserted the boot is noticeably delayed, but it's instantly continuing as soon as I unplug the stick. So there is something processing the stick ... I tried different sticks, but hope it's not related to using one special stick since they are used to support similar (equivalent) interfaces, aren't they?
Don't tell me about using TrueCrypt or similar as I prefer to use existing software instead of adding 3rd-party software doing things the same way. And for True Crypt USB must be readable at boot as well. And previous trials with different approaches rendered all failing at some point of setup. Finally, I don't want to reinstall existing Windows as it keeps me from working even more.
Found some post regarding trouble with Lion installations (e.g. I can't use rEFIt ... it simply didn't show up and this seems to be related to using Lion), found the KB article of Apple on preparing USB external storage for use at boot, but all troubleshooting hints didn't help.
What the heck is wrong with this setup?
EDIT: There is no problem to have Bootcamp starting previous Recovery HD partition now Bitlocker startup partition instead of originally prepared Bootcamp partition, which is encrypted now. This is in contradiction to other posts here. I'm sure Apple support isn't best choice to ask for support as this problem is MS specific and thus Apple won't care that much ...

Well, I've seen lots of those threads as well and most failed to manage cooperation of Bitlocker and FileVault, have trouble to get a second partition for windows to use with bitlocker or truecrypt etc. But these issues don't apply to me anymore.
Next there are threads instructing how to get a USB stick to work with Bitlocker claiming to have GPT instead of MBR so EFI is gaining any access on them. Those cases seem to work with MacBooks running with Windows, only, thus passing the issues mentioned in paragraph before as well.
And there is my confusion originating from: I can remember some sites claiming to have trouble with EFI on a Mac using Lion, but all those sites are older than Lion's final release date. So I don't know if there is a similar issue today or if I'm actually missing some option ... rEFIt isn't working with Lion according to the refit site itself. Some sites claim EFI is behaving differently on whether there is a super drive or not as Lion isn't supporting USB booting as long as booting from DVD/CD is available ... what's true about those facts? Is my problem related to having a super drive? Are things getting better as soon as I'm replacing my superdrive by a second internal drive? Is it that strange or some sort of plausible behaviour?
According to GPT, Windows 7 is obviously failing to properly detect hybrid MBR/GPT setups on USB sticks while that's what MacOS' disk manager is doing on having GPT-based single partition stick with exFat format. Instead of using the second hybridized partition it's accessing the protected part, only. If I'm converting a disk to GPT in windows everything works fine, but then without hybridized MBR ...
Regarding the fans I'm with you ... as soon as processor load is exceeding 5% the fans get quite noisy ...

I can't open video file in the page , i download and install flash many time but don't work , i use firefox 5 and windows 7

i can't open video file in the page , i download and install flash many time but don't work , i use Firefox 5 and windows 7

My current version of Chrome is having problems, too! It's so annoying. Anyone have any suggestions now? I basically can't view or download any PDFs because of this.
Does anyone else think this is a problem not only with Adobe? I would think Apple would have something to do with this? Wouldn't they get some idea from the developer versions that no browser can open PDFs while running Lion!? Pretty bad customer service on the part of a company that prides itself on being VERY customer-friendly. Wouldn't you say?

Norton identity safe with firefox 5 and windows 7 compatibility?

Will my Norton Identity Safe work with Firefox 5 and Windows 7?

This is an old thread and the question was asked in relation to Firefox 22.
We are now on Firefox 23.0.1
If anyone has a problem using Norton with Firefox 23.0.1 or Firefox 23 please start a new thread. Use [/questions/new]
mikeymack2002 says above
''1 temporarily disable Firefox auto update''
'' 2 download the new version of FIREFOX ...''
'' just simply that it doesn't like the new Firefox update at present,''
If I understand that correctly mikeymack2002 is saying Norton does not like the Firefox updater. If that is the case it is a separate problem.Please start a new thread.
I do not wish to go off topic and continue discussing Firefox 23 and Norton here but will just add some information before locking this old and solved thread.
With regard to Firefox 23 please note this Norton post about Norton <s>not</s> '''now''' being compatible with Firefox 23
*http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-23-Support-for-Norton-Toolbar/td-p/1001655
'''Also note Norton sites may have a problem with Mixed Content Blocking (MCB) that my be an issue from Fiefox23, but there is no need to downgrade Firefox, just click on the shield in the Firefox addressbar and allow the Norton site'''.
<sub>Bug 905183 - https://community.norton.com/ mixed content blocker problem with the sites top level navigation.<s/ub>

T6100 with X-FI Titanium Fatal1ty Pro and Windows 7 x64

7T600 with X-FI Titanium Fatalty Pro and Windows 7 x64 Hello,
Please forgive me my bad laungage. Im writting this Post because i want to ensure i wont have any problem using configuration as i wrote in topic. So, are there any drivers for Windows 7 x64 (PL, Home Premium) for my sound card. Can i also use Creative Alchemy tool on Windows 7 x64. And do i need to use Alchemy on Windows 7, to gain EAX in games too? Can i also download and use PowerDVD with is deli'vered with the drivers? And what with Dolby Digital Li've? Is there a problem with activating and using it on Windows 7? And last question: Can i gain a 5. sound with my Creative Inspire T600 sound system and use it in game, and music listening?without any trouble?
I wish to apologize for that many?questions but this is very important to me. So can i use it all, and can i install it from my X-FI?Titanium?Install CD, or do i have to download it from Creative site?
Thank you very much for answer!
Thunderbolt (my real name is too hard for foreigners) ^^

Please refer to my reply on your post under Windows 7.

Firefox 4b2 and Windows 7, multiple tabs shows up as windows in OS-taskbar

I have been using Firefox on my Windows 7 based computer (Ultimate x64) and I didn't experience this when using v3.6 and earlier versions. But ever since I updated to v4 (beta 1 and now beta 2), I have noticed that when I have multiple tabs open in Firefox, it shows up as Windows in Windows 7-taskbar... If I hover the pointer over to, and place it above the Firefox Icon (or click it), a LOOOOOooonng list shows up with each tab.. But that wasn't the case when using v3.6 for example, instead, each window showed up, but the tabs didn't show until I opened the actual Firefox-window, and this is exactly how I would like it to be.. I have been searching with lights and without finding any answer/s, search the settings-tab and other locations where this feature might show up, but I can't seem to find it, Im completely out of ideas and I need your help.
Best regards // Martin Johansson, Sweden
== This happened ==
Every time Firefox opened
== When I updated from v3.6 to v4 Beta 1, and now also with beta 2

You need to change a hidden setting.
Type '''about:config''' into the location bar and press enter.
Accept the warning dialog that appears.
This brings up a list of preferences, in the filter box type '''taskbar'''
Double-click on the preference called '''browser.taskbar.previews.enable''' to change its value to '''false'''

My solution for No Audio -- Conexant drivers and Windows 7 x64

My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/ About half way down you will find the sub-directory with these files. Just right click each one and save to your desktop.
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C;/swsetup/ This is the directory where HP updates default to.
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file. It did not work the first time -- I missed a line in my cva file. However, I then manually installed the Conexant drivers as follows and voila I had sound, nice crisp clear sound.
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then" Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then Conexant, then "Have Disk" . Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
This question was solved.
View Solution.

I thought that I would recompile my answer and then mark this thread as solved since it was not a post about a problem but rather how I solved a very common problem that might be of benefit to others.
My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/sp35501-36000 About half way down you will find these files. Just right click each one and save to your desktop.(The 32 bit files are in a different subdirectory at ftp://ftp.hp.com/pub/softpaq/sp??????-??????)
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C:/swsetup/ (This is thedefault directory for HP updates.)
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file and voila I had sound, nice crisp clear sound.
The use of the cva file is to streamline the driver install and it is kind of cool if it works. If you cannot find it or you are not successful the first time or you do not want to bother with modding anything, do not worry, the manual install will work for sure.
Run sp35558.exe to extract everything and let it strike out. Then go to Device Manager and update the driver manually as follows:
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then "Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then "Conexant", then "Have Disk". Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
Hope this helps.

Lenovo X131e doesn't work with Prolific PL2303 based USB to Serial Adapter and Windows 7 x64

This is sort of a bug report. A Lenovo X131e with Windows 7 x64 and the PL2303 driver including 1.6, 1.61 and 1.7 will not successfully install the driver - Windows always reports "Driver Install Failed" on plug in to USB 3 or USB2 ports. However, putting a USB2.0 hub inbetween the USB to Serial Adapter and either USB port type makes the adapter work fine. This was not the case with the X130e. I'm not sure where to report this beyond this posting, but more of an FYI.

If the USB can be used for other equipment,
That may be compatibility issues for USB and Prolific PL2303.
Don't plug Serial Adapter when installing the driver,
Ofter installation, Connect serial adapter to see whether it is working normally.
I am a volunteer, don't work for Lenovo. I am a software engineer.
thinkpad x61t, os:win7 Awavo Software com port monitor serial port monitor

CS2 and Windows 7 x64 Pro -- some PS1 fonts don't appear in Photoshop.

Since purchasing a new computer running Windows 7 x64 Pro, several of my fonts no longer appear in Photoshop CS2. They were functioning perfectly on my previous system running XP. The particular fonts that do not appear are Type 1 fonts, but other Type 1 fonts function normally. Adobe does not provide support for CS2 on Windows 7 systems. Since I use Photoshop daily, any help would be much appreciated. Thank you.

For Win7 64bit Pro or Ultimate (or Enterprise?) this is ONE example of using Virtual XP
http://forums.adobe.com/thread/702693?tstart=0

CA-42 cable drivers and Windows 8 (x64)

Hi,
Are the CA-42 cable drivers compatible with Windows 8 available?
The ones that I have on a CD worked with Windows XP, but I don't think they'll be good for Windows 8.

Abi99 wrote:
Mhm. That helps a lot actually.
In the Windows Control Panel » Software, what is the version of your Nokia Connectivity Cable Driver: 7.1.182?
In the Windows Device Manager, was a Modem generated for your Nokia 6610i?
This rules out PC Suite and Nokia Suite, and allows us to concentrate on the USB cable driver. If no modem was listed for your phone, please, attach your Nokia 6610i and have a look at the USB devices. Is there any yellow mark? Context-click on that and refresh its driver. If that does not help: Are you sure, you have an original Nokia CA-42?
I can't see a "Software" category in Control Panel in Windows 8, so I can't check the version of my Nokia Connectivity Cable Driver.
Do you mean "Uninstall or change a program" in Control Panel?
No modem in Device Manager after connecting the phone. Does it need to be created? As far as I remember from Windows XP, no modem was created and the connection was initiated and worked OK.
No USB devices with a yellow mark, either.
The cable is, in fact, DKU-5, but it worked fine with this 6610i on Windows XP.
I read on other forums that you have to install virtual COM port emulation drivers for this cable.
I have the drivers on the original CD that came with the cable, and they were installed on Windows XP (x32) a few years ago and worked OK, but I don't think they will be compatible with Windows 8 (x64). Am I right?
Please note that I don't need a connection with a PC to use internet. I just need to transfer data (mainly text messages) from the phone to a PC

All Firefox tabs and windows lock up when a single tab can't download a file (video, pdf, etc.)

If I am trying to load a webpage that contains a video, pdf file, or other large file, sometimes the webpage locks up, and then ALL other Firefox windows and tabs lock up as well (the entire program is frozen). This doesn't happen with IE or Chrome (in Internet Explorer, even though a tab may lock up from loading a large file, the other tabs and windows are still useable). Is there some kind of pluggin I can install to prevent this from happening?

Hi - yes I can! I hadn't noticed that little arrow before, thanks.
However I would really like to stop it hiding the first tab all the time.... Even when I navigate to the first tab using that "list all tabs" arrow, it still remains 'hidden' (i.e. I can't see a tab up the top, even when that tab is active. And when I navigate away from it to another tab, it is invisible again).
Any ideas?
Thanks

IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
If there is anything I left out, please let me know; and I thank you in advance!

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

Is there any documentation concerning Contribute and Windows 2008 x64

I have the impression that it may not be posssible to use
Contribute on Windows 2008 x64 Enterprise server.
Has anyone had any luck?
thanks

Hi PREM,
If I understand correctly, you want to use SQL Server Authentication log to SQL Server Integration Services.
Based on my research, only Microsoft Windows Authentication is available for SSIS. So we cannot use SQL Server Authentication log to SQL Server Integration Services. Besides, we can only add OS users in the DCOM Config permission area.
Reference:
Connect to Server (Integration Services)
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problem with new firefox tabs and window focus

Here's a problem that I've had for ages - sometimes it annoys me, other times I can live with it. Right now it's really p***ing me off. :x
I have selected 'a new tab in the most recent window' under FF's Preferences->Tabs->Open links from other applications in:, so as an example, if I click on a URL in a mail in Thunderbird, Firefox opens it in a new tab. However, window focus stays on Thunderbird. I run both of them full screen, so although I'm looking at the web page in Firefox, anything I do on the keyboards affects Thunderbird. It affects URLs opened from other apps too e.g. if I open a terminal and do
firefox www.archlinux.org
focus stays on the terminal window. The only exception is when firefox is not already running - in that case, firefox launches with focus.
DE is xfce4, and the system is completely up to date.
I've done some googling, and AFAICS, nobody else seems to have this problem. Any ideas, anyone?
TIA.

Thanks MAC!EK - definitely a useful add-on, but it still doesn't solve my problem. In Tab Mix Plus Options, I have the following selected:
Links -> Open links from other applications in: New tab
Events-> Tab Focus -> Focus/Select tabs that open from: <all>
However, the behaviour is as before i.e. I click a URL in Thunderbird, it opens in a new tab in Firefox, but window focus stays on Thunderbird. Within Firefox, the newly-opened tab is selected or focussed, but Firefox itself is not.
Anyway, thanks again. I think I need to keep looking.

Problems with my touchscreen and windows 8 x64

I've installed Windows 8 Enterprise x64 and the only thing that doesn't work is the touchscreen, i've re-installed the software (Lenovo Touch Screen 3.3.3202) but doesn't enum the hardware. I'll appreciate any help. That's all folks

hi hstar,
can you share the model of your lenovo first?

Firefox 4 and Windows 7 x64 Ultimate

Similar Messages

Maybe you are looking for