Firefox 4 beta8 will only start in safemodus but not normaly

I use firefox 3.6.13 parallel to firefox 4 beta 8. Beta 8 will only start in safemodus, not in the normal form. In former time, beta 7 starts without any problem

I have firefox 3.6.13 and 4.0b8.
Beta is installed by default in a different location. I have also set it up with its own profile. I have not noticed problems. I am assuming the compatibility checker worked as it set itself up without firebug, as that was not compatible, I later installed a firebug alpha for the firefox beta.
To create additional profiles the easy way use [[Managing profiles|Profile Manager]]

Similar Messages

Why will only one site load but not display, yet links are available on the site? OS10.8.5, Safari 6.1.4

I am running OS 10.8.5 and Safari 6.1.4, When I go to sierratradingpost.com, the page appears to load, but the page is blank. When I pass the cursor over the page, it will change to the pointing finger indicating active links. Yet, when I click on the link the new page loads, but is also blank. This only happens on my Mac Air, it does not happen on my iTouch or iPad. I have looked through all my settings when the page is loaded but can find nothing. I have WOT, Ghostery and Ad bloc active. Even when I turn all those off I still have the same problem. Everything was fine yesterday morning, but when I went to the site in the afternoon, the problem arose. Any ideas?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Have just installed FireFox and it only starts in 'Safe Mode' ???

I was having problems uploading photos to Photobox... 'They' suggested installing FireFox
I haven't yet put a short cut on the tool bar, so when I click 'start' Firefox is highlighted as a new perog, but it states that it will only start in '(Safe Mode)'

Those disk permissions results are harmless and are irrelevant here.
All external hardware is disconnected when you try this?
Do you have Xcode installed?

My iPod Classic (the older version) will only start up, what to do?

My iPod Classic (older version) will only start up but as soon as it starts up it turns itself off again and it makes quite a loud clicking sound when it turns itself off, I have had it plugged in for quite a while and in the first 30 minutes of having it plugged in it said very low battery but then turned itself off, I have tried resetting it with the menu and the middle button and I can't connect it the computer that it has been synced with either, I really need my iPod and I really don't know what to do to fix it, is it the battery or the cable or something small like that? I'm not sure whether it is charging from the wall socket either.

- After being connected tot a charging source for half an hour, reset the iPod.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Connect the iPod to your computer and and if it shows in iTunes restore the iPOd.
- Next see if placing the iPod in recovery mode will allow you to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Sorry I missed that you said you dried it in your first post.

I have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id

i have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id, can help me?

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

How to show ipad application in itunes, but will only be assessable to owners, not the general public.Using lock code/password protected on iTunes

How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes

So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
Thanks
Karen

Every time I update firefox it will only run updater.exe when I try to restart

every time I update firefox it will only run updater.exe when I select firefox to run. The only way around this that I have found so far is to do a fresh install of firefox.

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT1657 My rented movie will only start when I am using wifi?

My rented movie will only start when I am using wifi?

try connecting a headset and call it if it rings in the headset then its this hardware issue
read
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and more
iphone stuck in headphone mode

Lenovo G555 will only start 1 in 10 times

Good day all
I have a Lenovo G555 that will only start about 1 in every 10 attempts and is slowly getting worse.
When it does come on, it seems like I have to hold the power button for 15 seconds and when I release it - and if I'm lucky - it may start.
Does anyone have some ideas on what the cause might be? When it does turn on, are there some diagnostics that I can run to pin point the problem.

Hi Andrew,
I’m sorry to hear that the issue persists even after performing Flee-Power troubleshooting step in your G555, the only available option to check the issue is to turn ON the Laptop using AC Adapter only without the Battery connected and if the issue persists, performing OSRI (Operating System Re-Install) will confirm that the issue is Hardware related.
To perform OSRI click on OKR (One Key Recovery) button in the computer, below is the link to download the User Guide for the steps to perform OSRI and refer page no. 1 to locate the OKR button and page no. 22 for the steps to perform OKR.
NOTE: Please backup the data in the computer before performing OSRI, as the data will be completely erased.
Lenovo G555 User Guide
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can I set Firefox 8.0 to accept 3rd party cookies ONLY from selected sites but NOT from any other sites?

I do not like to accumulate 3rd party cookies and would simply not check the Accept 3rd Party Cookies box in Preferences. BUT in order to use my bank's web page I have to accept 3rd party cookies from a separate site that manages some of their transactions (like paying bills). This means I have to accept 3rd party cookies and then delete them by hand OR I have to check the accept box each time I use the bank's website and then uncheck it when I am done.

Thanks, but that is not what I was trying to do. I do not want to block cookies from a single site. I do not want to block all 3rd party cookies.
What I want to do is ACCEPT 3rd party cookies only from ONE site but NOT from any other site.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

My ical will synch to my iphone, but not the reverse. Whats up with that?, My ical will synch to my iphone, but not the reverse. Whats up with that?

My ical will synch to my iphone, but not the reverse. Whats up with that?

An iPod can only sync with one iTunes library. The iPod sees the rebuilt computer as a new iTunes library. To make this computer the syncing computer
- Transfer iTunes purchases:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
newer copy
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the iPod backup that iTunes makes does not include synced media like apps and music.

Permanent capture only 4 audio tracks but not 16?

everytime i capture ...the log n capture audio tracks will automatically make all 16 tracks on....i have to manually shift off rest 12 tracks...any solution to permanent capture only 4 audio tracks but not 16?

this is my picture showing...icant find the audio button...>.<....plz correct me if im wrong..
[URL=http://imageshack.us][IMG]http://img137.imageshack.us/img137/5505/picture1ye5.png[/IMG][/URL]

HP officejet Pro 8100 will print from an Iphone but not from my windows laptop

HP officejet Pro 8100 will print from an Iphone but not from my windows laptop. I get an error stating "unable to communicate with printer"

Hi Melatina66,
Welcome to the HP Support forums. I understand that when trying to print from your laptop that you get a communication error message.
To better assist you, would you please provide some further information:
1)       How is the printer connected (USB cable, ethernet or wireless)?
2)      When you installed the printer on your laptop did you set it up with a USB cable? If yes, did you switch the connection type on the laptop from USB cable to ethernet/wireless?
3)      What version of Windows operating system are you running on the laptop (Windows XP, Windows Vista, Windows 7, or Windows 8, etc)?
4)      When printing from your iPhone are you using Apple's AirPrint or HP's ePrint app?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Firefox 4 beta8 will only start in safemodus but not normaly

Similar Messages

Maybe you are looking for