Firefox 4. Could not find compatible GRE between version 2.0 and 2.0.

When run firefox it output to stdout "Could not find compatible GRE between version 2.0 and 2.0." and exit. What is this? I use xulrunner-system-cairo 1.9.2.15-1.
Last edited by veg (2011-03-24 17:56:41)

@veg just get rid of xulrunner-system-cairo and install xulrunner. Now our xulrunner is compiled with system cairo support

Similar Messages

  • Call of Duty Ghosts/ battlefield 4 Freeze; NVIDIA 331.65 driver: this driver could not find compatible graphics hardware

    I'm using imac 27 inch mid 2011
    I've bought Call of duty Ghosts.. it require 6 GB ram, so i upgraded mine from 4 GB to 8 GB. Now i can run the game, after 2 sec, it freezes. So i tried to download NVIDIA 331.65 which says to be the solution. And then it says"this driver could not find compatible graphics hardware". So i couldnt download NVIDIA 331.65 ....
    Any idea?
    This might be the problem for Battlefield 4 gamers too

    There's an important distinction you need to make on NVIDIA's web site to get the "right" driver.
    NVIDIA's driver finder has separate categories for the desktop and mobile variants.
    You don't specify the computer model in question, so I'm going to throw in a guess that you have a notebook.  If this is so, or you have one of the iMacs or Mac minis with the 9400 MCP, then it's really a 9400M (the M standing for mobile), in which case you need the GeForce 9M drivers.
    If installing these yields the same error, then the drivers can be modified so that they will install properly.  Google "nvidia mobile driver modder" if you wish to try.  I cannot, however, guarantee the results of such hacks even as I know they exist.
    Nate

  • Could not find the SAP Livecache version 7.6.04   BUILD 015 in SMP

    Hi,
    Could not find the SAP Livecache version 7.6.04   BUILD 015 in SMP.
    Do anybody have idea on this ?
    Thanks a lot in advance!
    Omkar

    Hello Omkar,
    you can find it following note #875662:  Importing liveCache version 7.6
    Also, please refer to note #753528: LCA builds on SAP Service Marketplace
         where
                 liveCache patch = LCA build
                 LCA build = set of LCA com routines + liveCache patch
    SAP liveCache technology
    Best regards,
    Tomas Black

  • I want to download face time on iPad 2 I could not find it a bought it from Dubai and am living in canada

    I want to download face time on iPad 2 I could not find it a bought it from Dubai and am living in canada

    You cannot get it ever.
    Your iPads serial number is blocked because you bought it in a country that does not allow FaceTime.
    No matter where you go, you can not get it.

  • Any time I click on a new link, Firefox responds with "Oops! Firefox could not find..." - I click refresh and it loads. Is there a fix for this issue?

    This has been happening for a few weeks. I have recently upgraded Firefox to 4.0 hoping that would rectify the problem, but I am still encountering it.

    Do you actually mean FastMail? operamail.com simply redirects to fastmail.fm.
    The steps for adding a new mailto handler are described in the FastMail wiki:
    * http://fastmail.wikia.com/wiki/Firefox_3_default_mailto
    If you actually meant mail.opera.com, that's a separate service. In that case, the correct step 5 should be
    <pre><nowiki>javascript:window.navigator.registerProtocolHandler("mailto","https://mail.opera.com/m/mail/compose:to=%s","My Opera Mail")</nowiki></pre>
    Once you've added the new handler, make sure it's selected as the action for ''mailto'' under Options - Applications.
    * [[Set how Firefox handles different types of files]]

  • How do I remove Bing from my toolbar at the top of the page. I have already tried both of the suggestions given in the help section; I could not find Bing in my control panel "add and remove programs," and there was one other suggestion which I also tried

    ''locking due the age of this thread - asked and answered''
    I have tried all of the suggestions given by FF in order to remove Bing from my computer but nothing seems to work. I would appreciate some advise. For instance when I go to add and remove programs I can't even find Bing listed. Looking forward to your suggestions. Thanks.
    == This happened ==
    Every time Firefox opened
    == I first installed Firefox

    Right click "Tools". Uncheck "Search Toolbars".

  • Could not find schema information for the attribute 'filename'

    Can anyone help me.
    I download the VB.NET sample source and try to run the application and got this error.
    "Could not find schema information for the attribute 'filename'"
    and
    "Could not find schema information for the attribute 'url'"
    and
    "Custom tool warning:Schema validation warning:Schema item 'element' named 'AccountWS_AccountUpate_Input' from namespace 'urn:crmondemand/ws/account/' is invalid. Namespace 'urn:/crmondemand/xml/account' is not available to be referenced in this schema"
    Thanks
    Pitiporn

    Are these errors or warnings? If warnings, you should be able to just ignore them.

  • Error "Could not find -Xrun library: libjdwp.so" when starting WL 6.1 in debug mode

    Hello,
    I installed WL 6.1 SP4 on Solaris (trial version). The installation went well
    and we were able to start the server and run our application. I then added the
    debug options in the start script :
    $JAVACMD $JAVA_OPTIONS -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=7212,suspend=n
    When I then try to start the server I get the following error :
    Error occurred during initialization of VM
    Could not find -Xrun library: libjdwp.so
    I looked and the library is installed in our sdk :
    /products/java/j2sdk1_3_1_07/lib/sparc/libsjwp.so
    What did we do wrong?
    Thanks for your help,
    Roland

    Hi Wayne,
    I took the instructions from our WL 5.1 installation. I hope the options are still
    the same (if not can you tell me where to find the correct ones?).
    You were right about the LD_LIBRARY_PATH. I added the line :
    LD_LIBRARY_PATH=$JAVA_HOME/lib/sparc:$LD_LIBRARY_PATH
    and now I can start the application without any errors.
    Thanks!
    Roland
    "Wayne W. Scott" <[email protected]> wrote:
    >
    Where did you get the instructions for adding the debug options?
    Since libsjwp.so is a shared object, what does your LD_LIBRARY_PATH look
    like?
    Is /products/java/j2sdk1_3_1_07/lib/sparc in it?
    Wayne Scott
    Roland Pennings wrote:
    Hello,
    I installed WL 6.1 SP4 on Solaris (trial version). The installationwent well
    and we were able to start the server and run our application. I thenadded the
    debug options in the start script :
    $JAVACMD $JAVA_OPTIONS -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=7212,suspend=n
    When I then try to start the server I get the following error :
    Error occurred during initialization of VM
    Could not find -Xrun library: libjdwp.so
    I looked and the library is installed in our sdk :
    /products/java/j2sdk1_3_1_07/lib/sparc/libsjwp.so
    What did we do wrong?
    Thanks for your help,
    Roland

  • "console: Could not find image 'BackArrow' " Does somebody know what it means ???, "console: Could not find image 'BackArrow' " Does somebody know what it means ???

    Hi All. In my console appeared message  "console: Could not find image 'BackArrow' ".  Does somebody know what it means ???
    BR

    I believe this to be a bug in Console.app and that it started with 10.7.3 or 10.7.4. The message is generated by Console.app (Console: Could not…). On my system it is always these 2 messages and they are triggered by launching Console.app.
    03.06.12 21:33:54,927 Console: Could not find image named 'BackArrow'.
    03.06.12 21:33:54,927 Console: Could not find image named 'ForwardArrow'.
    Try opening and closing Console.app a few times and you’ll see. I suppose this is just a bug where the app is trying to locate some of its resources which might just be icon images for back/forward that are (maybe) no longer used but still referenced.

  • Adobe premiere could not find any valid editing modes error

    Hi, I am installing adobe premiere 8 and the update patch and when I click New Project I get the error message Adobe premiere could not find any valid editing modes, please reinstall and start again.  I have reinstalled, installed patch, checked for the vidc.draw in registry and none of these have resolved.
    Have XP service pack 3, with valid HD space etc...  Any suggestions greatly appreciated.

    Hello, Kelzb,
    Premiere Elements has its own forum, which is here:
    http://forums.adobe.com/community/premiere/premiere_elements
    and you'll probably get better, faster replies to video questions there. Good luck!

  • The system could not find the finished material in the stock.

    The system could not find the finished material in the stock and gives the following error:
    Only 0 YD of material 9000345 A-PIECE01 available.
    I received the batch managed material from production with T-code=mb1c and mov type=521.
    The received material is transferred into material with T-code=mb1b and mov type=309.
    And finally the material is packed and thus the handling unit is created.
                                     whenever i comes to make the delivery order in vl01n,the system could not find the stock packed in handling units and gives the error(Only 0 YD of material 9000345 A-PIECE01 available)
    Regards:Vijay

    Hi Vijay,
    I have a question that have you define the UoM properly in the material master.
    Also check the stock is showing or not in the system for your material.
    Regards,
    MT

  • Finder can not complete the operasjonen because some information in «Firefox.app» could not be read or be written (malfunction code -36)

    Upon downloading firefox 3.6.16 it suddenly stop loading and provides this explanation:
    Finder can not complete the operasjonen because some information in «Firefox.app» could not be read or be written (malfunction code -36)
    What do I have to to come around this ?
    brgds
    J.Bakke

    Aint you quick to jump to conslusions? So becasue one thing isn't working of the hundreds of things I donwloaded doesnt work, my drivers are broken?
    Ok then, let me download some other things to make sure
    Minecraft: it worked ✓
    Firefox: it worked✓
    Synthesia: it worked✓
    iExplorer: it worked✓
    Pencil: it worked✓
    Flash: it worked✓
    Synfig was made in 2006, so it's not unlikely that it might not work for some people. By 'some people', I mean me. I was just asking if it was something on my side, but if that's all you got, I think it's highly unlikely that it's my fault. I don't even want it anymore, I got Flash Professional. I was just wondering. I could have sworn you used to write more detailed answers before jumping striaght to conclusions. 'Did this happen to you on anything else?' or maybe even 'Why don't you complain to them?' would have been fine.

  • When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

    When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • I keep getting error msg "Oops! Firefox could not find..." a lot!

    On websites that I visit often, I have started to receive "Oops! Firefox could not find xlforum.net", etc. This is happening a lot. I've already done a virus/malware scan and the problem still exists. Any idea what's going on?
    == URL of affected sites ==
    http://

    My problem has not gone away. I've even done a system restore and it hasn't gone away. I've disabled all my add-ons as someone suggested, but that didn't help, so I put them all back in, one at a time, which is a real pain in the *ss, having to restart Firefox each time, but that didn't help. I know when I tried to load the newest version of Firefox I would keep getting a proxy not recognized error message over and over, so I went back to the last version.

  • SFTP Seeburger adapter - Could not find channel for report handling between

    Hello Friends ,
    We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
    Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
    Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
    Could experts help me ...
    Thanks for your time .
    Regards,
    Laxman Nayak .

    Hi,
    I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
    I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
    Any help would be greatly appreciated.
    Thanks,
    Alan

Maybe you are looking for

  • To Everyone with Random Shutdowns! (Solved! REALLY!)

    Hey all, I had posted about a week back about my Macbook (Core duo white, late 2006), it was having the same symptoms as some of the others with the known random shutdown syndrome (RSS). Like many others I had thought it was the end of my macbook and

  • To display chinese characters with SQL Developer

    I have created one table on the Oracle Express Database. In this table ther is one field Nchar tipe. The NLS_CHARACTERSET of the d.b. is WE8MSWIN1252, the NLS_NCHAR_CHARACTERSET is AL16UTF16. I have done an insert on the table and in this field i hav

  • Not assigned set type to category

    Hi, GURU! I want to assign set type COMM_PR_MAT to my category in transactional COMM_HIERARCHY, but i don't see this set type in the list. I find this set type (COMM_PR_MAT) in transaction COMM_ATTRSET (Search for predefined set types). How to assign

  • Adobe Premiere Elements 2

    I have not been able to discover the serial number of the software that accompanied my Nokia N93 hence making it impossible for me to instal the software. How do I find the serial number? This is the problem I have for now. Can you, please, help imme

  • Can not delete cube or measure using AWM10.1.0.4

    Hi all, I can not delete a cube using AWM10.1.0.4 when the database is 10.1.0.4. But when the database is 10.1.0.3 with latest OLAP patch, there's no problem with deleting cubes. The following is the error I got when trying to delete a cube(any cube)