Firefox 4 locks up a lot when I visit Amazon. I can't use it and when I try to close it, it crashes.

A lot of the times when I visit Amazon FF 4 locks up on me to the point that I can't use it. The only option to get out of it being locked up is to right click, then select "close" at which point a dialogue pops up saying that the program has stopped responding and to either wait or force it to close. Waiting does not work so I have to force it closed.
When I restart FF it will at least give the option to recover the session but then it usually locks up again if I let it reopen the same Amazon page.
This problem doesn't occur every time I visit Amazon but quite often. I think it locks up on me probably 60 percent of the time I visit Amazon.

I have this same exact problem and for some reason it appears to be limited to Amazon. I have yet to hit another site that causes Firefox to freeze, but 80%+ of the times that I go to Amazon, Firefox freezes and I have to take the steps above that alvester states to close and restore (but I cannot restore with Amazon or it locks up again).
As it doesn't occur every single time, disabling my extensions hasn't proven anything to this point. I disable them and it works, but then when I enable them again, it works.... Until some future time when I go to Amazon and it hangs all over again.

Similar Messages

Firefox tells me it can harm my computer and when I accept it it says that maybe I don't have permissions to access it. It all started when I accidentaly installed "Babylon" search engine tool bar, when I removed it, the system started blocking Firefox

I accidentally installed the Babylone search engine tool bar while dowloading a program and when I realized that Firefox had been substituded I tried to get back and even ran a restore for the system. Since then, everytime I try to reisnstall Firefox, there is a message that says that Firefox can harm my system and when I ignore it, it says that maybe I don't have permits or licenses for it. I am frustrates as even the menu bar from my alternative search engine, Google Chrome, has disappeared.
Please write back and tell me what to do

You may also need to create a new profile in case more files were damaged by closing down Firefox that way.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

When I try to open it, it shows a little box that you can't maximize and if you try to close it it says ''the application is not responding'' help?

Hello, I really need your help. When I try to open firefox, nothing happens or it will open a really small and empty window in the top corner of my laptop. That window cannot be maximized and if I try to close it either nothing happens or it says that the program stopped working. I dezinstalled it and installed it again 3 times... I don't know what to do anymore. Any help would be appreciated!

Could you see whether Firefox will start in its Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
Here's how:
With Firefox closed, hold down the Shift key while starting Firefox.
A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Does that work?

When I play movies on MPlayerX the audio delays and when on VLC its pixilated?, When I play movies on MPlayerX the audio delays and when on VLC its pixilated?

When I play movies on MPlayerX the audio delays and when on VLC its pixilated?, When I play movies on MPlayerX the audio delays and when on VLC its pixilated?
My Macbook Pro is 15-inch, Early 2011
4 GB 1333 MHz DDR3
Intel HD Graphics 3000 384 MB
running on OS X 10.9.1
100GB free

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

I can't use my iPhone when charging.

I can't use my iPhone when charging.

markfromnewyork wrote:
From my experiences with the same problem, I can tell you that it seems to only happen when the transformer is running on a modified sine-wave.
What do you mean by that? A "dirty" source of power where there are a lot of transients on the AC line?

I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?

I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B.

When to use interface and when Abstract Class?

In a recent interview I was asked "When to use interface and when Abstract Class?" Explain with an example.
Also in what situations a class should be made final(real time example)

Interface is a pure contract with no implementation. Typically used to define a communication contract between two different sub-systems. Example EJB home interface. This also allows the design to change as long as the contract is met.
Abstract class is when there exists a lot of common functionality already known and can be coded. However, a few unknowns exists (typically about data) for which abstract methods need to be defined and implemented by the sub class.
Example: Consider a workflow engine. A great example for abstract class. The workflow process has lot of common code that is independent of the workflow type (vendor flow, contract flow, payment flow etc). However, certain decisions on the route to take will depend on value of data being submitted. So the base class will define a abstract Data getData() method and proceed assuming data will come. The implementing subclass will provide the actual logic for getting the data.
Also see the "Template" design pattern.
Note: To some extent the common code design drives the behavior of the abstract methods. So if the design changes then so "might" the behavior expected from the abstract methods.

Masterdata - when to use it and when not to use it

Hi!
I have had some discussion with my colleagues about the use of masterdata on Oracle databases. Some of them tells me that I should use it if the data don't change often (ofcourse.....). This should ALWAYS be done they say. But I don't agree on this..
Is it really necessary to make a lot of masterdata (and also views that has to be used) if the data is only to be loaded once a day, and the number of records is max 1000?
I can't see the effect on this...
Can someone give me a guideline for when to use masterdata, and when I don't need to use masterdata (if there are any article on this, please give it to me).
Best Regards
Helge

Hi
Answering this question usually requires a few books, so, I'm sorry, it's not really as simple as choosing between using a screwdriver vs. a hammer.
But, very short, inheritance should ideally only be used when there exist a strict 'is-a' relationship. However, sometimes it may be clever to inherit when you have a 'is-almost-a' relationship... And sometimes this is a stupid move. This depends on the context/circumstances.
Aggregation is normally considered a 'has-a' relationship, thereby differing clearly from inheritance. The old 'car' model says "a car is-a vehicle and has-some (at least) wheels."
The wheels are aggregated to the car class, that itself is inherited from vehicle.
However, this is just a good rule-of-thumb and there may be circumstantial reasons for not following these guidelines.

I am trying to use ichat and when I try to log in it says my account has been suspended bc of suspicious use...help

i am trying to use ichat and when I try to log in it says my account has been suspended bc of suspicious use...help

Hi,
I would guess this is an AIM valid Screen Name such as an Apple issued @mac.com account.
I would also guess you travel to other countries.
There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
Can you Log in here https://settings.aim.com/ ?
Is this where you saw the Suspended message ?
For AIM issued name the answer is to change your Password as this tends to prove you own the account.
This does not work for Apple IDs used as AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
More recently this has been a sticking point. It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
10:39 PM Saturday; October 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?

Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app, any help?

What does the error say?
A couple of thoughts: the file is corrupted or is password-protected. Corruption is more likely to cause Numbers to crash & Numbers cannot open password-protected Excel files. Try using one of the free Office clones & see what happens.

My itunes wont auto sync my iphone 4 after i connect it to itunes. But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day.

But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day and i was forced to use back a backup which i did in my old laptop 4 months ago. do i have to reinstall the itunes? will my backups be corrupted after i sync again? pls guide.
P.S/ its the latest version of the itunes whenever i did the backups.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

So i bought the 9.99 a month photoshop (with lightroom) and then installed CC when i went to the app tab both PS and LR said "try" instead of install is that how setup usually goes? or well it ask me later for serial numbers?

so i bought the 9.99 a month photoshop (with lightroom) and then installed CC when i went to the app tab both PS and LR said "try" instead of install is that how setup usually goes? or well it ask me later for serial numbers?

Oscarf16161909 for information on how to resolve the connection error preventing the active membership from authorizing please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed in the document you are welcome to update this discussion.

Firefox 4 locks up a lot when I visit Amazon. I can't use it and when I try to close it, it crashes.

Similar Messages

Maybe you are looking for