Firefox 4.o seems to hang when loading some websites while waiting for an application called static-cdn.mozilla....

the application seems to be : static-cdn.addons.mozilla.net

From the menu bar, select
 ▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses?

Similar Messages

Firefox version 3.6.10 hangs when loading a link in a new tab

My settings are to open links in a new tab. The Tab will show
'Loading... '
This requires exiting Firefox and reloading. Upon reloading the following message will appear
'Firefox is already running... '
It is then necessary to run the Task Manager and kill the process to reload
This is a constant problem after installing version 3.6.10. Does anyone have a clue what is going on. It is really getting annoying.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

The browers (FireFox, IE) too slow and hang when load Spanish language many

Hello There,
I am using the STRUTS Framework 1.1 for developing web application.
My objects:
Buyer{
String scompanyName;
String scompanyAddress;
Supplier{
String ssupplierName;
String ssupplierAddress;
I created 2 ArrayList Buyer and Supplier and put them to the ComBox. One Buyer has many Supplier when you select any Buyer....
If you select Supplier then the sub info of this Supplier will be displayed in below. As this action, I have selected many many Supplier for see sub info (Address, Employee...) many time.
When the action submit to Server then I see the Buyer info also change when display because Company Name and Company Address are the Spanish language.
Origin info:
Name : ABC Espa�a S.A.
Address: Carretera de LHospitalet, n� 11, Nave 1, 08940 Cornell� de Llobregat (Barcelona)
First time:+
Buyer:
Name : ABC Espa��a S.A.
Address: Carretera de LHospitalet, n�� 11, Nave 1, 08940 Cornell�� de Llobregat (Barcelona)
Second Time:
Name : ABC Espa���a S.A.S.A.
Address: Carretera de LHospitalet, n��� 11, Nave 1, 08940 Cornell��� de Llobregat (Barcelona)
We have 2 string very long in results when I select many many time and browser too slow and hang if the are to long. That problem only happen with the Spanish language, in other languages are not, It works good.
Please help me to solve these above problems, I have tried to add code in JSP page
<meta http-equiv="Content-Type" content="text/html; charset =ISO-8859-1"> or <meta http-equiv="Content-Type" content="text/html; charset =UTF-8">
But it also hang the browser.
Thanks a lot,
Vu Nguyen

Well... Are you sure that the problem is within the browser? If both browser hang, then check if your OS supports the language the right way. Also, your browsers my have plugins/addons for supporting other languages. Try to look for them or/and post your systems-names here to help others helping you =).
X--spYro--X

I have Kaspersky anti-virus for mac. The extension Kaspersky URL Advison 8.0.6 causes Firefox to hang when visiting secure websites, especially when the secure site redirects to another site.

Kaspersky URL Advisor 8.0.6 causes Firefox 9.0.1 to hang when visiting secure websites and will not allow a redirect to another site. banking sites, facebook, auctionsniper, all these are affected.

Please also contact Kaspersky Tech support and Forum and let them know the issue, if its really a bug, they will fix it through patch via database update
* https://my.kaspersky.com/en/support/helpdesk
* http://forum.kaspersky.com/index.php?showforum=117

Slight hang when loading Firefox 27.0.1 on Windows 8.1 Pro

I just upgraded from Windows 8 Pro to 8.1 and installed Firefox 27.0.1. Now Firefox has a fairly substantial delay when loading. When I say "fairly substantial" I mean about 6 seconds, every other program including IE is instantaneous and even Photoshop loads in about 3 seconds. I've tried everything I can think of, uninstall and re-install (including removing registry entries), turned windows firewall off, disabled add-ons, reset Firefox, etc, etc. Nothing has worked. Any suggestions?

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
if not work, try installing Ccleaner and clean all the options available to Firefox
Thank you.

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
Symptom:
FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
notices that the "status circle" spins around endlessly.
Actvity Monitor.app shows "Final Cut Pro (Not Responding)
and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
History: Upgraded FCPX from V10.0.6 to V10.0.07.
"FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
WORKAROUND:
FORCEd QUIT FCPX V10.0.7
RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
Let FCPX V10.0.7 settle….
select the project you just added above and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
wait until ALL the rendering as stopped.
QUIT FCPX V10.0.7
(now if FCPX locks up, just force it out and start again as above).
repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
I have managed to restore ALL my "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
Other issues:
use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's volume table that represented objects in "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
HTH
warwick
Hong Kong

Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
Your/Apples suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
Lastly I have noticed that:
impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
I'll monitor this thread.
Thanks for your comments lads!

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7. I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?

I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it. Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message. Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
I've also done a factory restore followed by a restore from backup and have the same problem.

Firefox freezes when loading some web pages then the computer locks up

Sometimes, when loading a website, the browser freezes. Then the computer locks up and I have to use the power button to turn it off. There seems to be no pattern to this problem. I'm also not sure whether or not the problem begins within Firefox, but a web page was loading every time it happened. It has only started happening this week.

I seem to be having a very similar, if not exactly the same issue. I'm using the latest production FF 11.0 release on Win7 64 and as with this not only does FF freeze, but I can't task switch, or anything. The one thing I've noticed is that when the lockup happens, it always appears to be loading some custom font from a CDN, if I breathe deeply and slowly and allow the request to complete everything seems to eventually unfreeze and I can continue, so maybe something to do with implementation of custom font loading?

IPhoto 11 and 10.8.2 Hangs when loading library

Ok.. I have just done my 4th clean install of Mountain Lion in the last 3 months. Due to issues I've manually restored my iPhoto, iTunes, iMovie and Garageband content back to my new clean system and then opened the above mentioned programs.
The problem is that iPhoto will not get past the opening after I choose the iPhoto library.
My test account will open a blank iPhoto library. But the main user account just hangs when loading the library.
So far I've done the following.
Launched with Command and Option and rebuilt the library and used the iphoto library 3rd party tool to rebuild the library.
I've cleaned disk permissions.
I've run Onyx and cleaned the entire system.
I've trashed iPhoto and reinstalled iPhoto from the iPhoto 11 disk and then updated through the App store.
What else can I try? My iPhoto library is 54 Gigs and is all my digital photos of my kids since they were born 10 years ago.

One simple thing you can try is Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

My 64Bit Adobe CS6 hangs when loading a file

My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Firefox is displaying unreadable characters when visiting some websites like digg. The sites work fine in all other browsers. I've tried all encoding options in firefox.

Firefox is displaying unreadable characters when visiting some websites like digg. The sites work fine in all other browsers. I've tried all encoding options in firefox.

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
See also [/tiki-view_forum_thread.php?forumId=1&comments_parentId=566006]

Fire fox loads some websites and not others. Clearing cache and history doesn't help.

Fire fox loads some websites and not others. Pages that don't load in Firefox do load in other browsers. Clearing cache and history doesn't help.
One of the websites that doesn't load is google.com! It loads some of the page, just some menu items at the top of the page. Then, it hangs and remains in the Loading state (with the spinning wheel and "Loading" in the tab) indefinitely.
The problem started after 3.6.11 was installed. I'm on Mac OS 10.6.4.
I would be happy if you just showed me where I can download 3.6.10. Also, is there anything special I have to do if installing an older version?

I ended up going into the clear history settings and setting it to clear history when Firefox closes and chosing it to clear history and cooking and browsing history when Firefox closes. Now the links work fine and the last page I was looking at before I closed Firefox is no longer there when it opens again. Problem solved!

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Hi headshot, <br /> Sorry you are having problems.
Are you seeing any error message or notification ? <br />If so what ?
If the page fails to load try clearing Reloading with the Ctrl F5 shortcut to force loading without the old new cached files. If that does not help try cache and clearing cookies for that site.
* Also see [[Websites don't load - troubleshoot and fix error messages]]
* [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

System hangs mounting encrypted lvm, doesn't wait for password

I have a system with two hard drives, each that has a separate encrypted lvm. The drive with my / parition mounts fine, using the grub command line cryptdevice paramater.
But the second encrypted partition on the second hard drive, defined in crypttab, causes the system to hang during boot. I get a message: "a start job is running for cryptography setup" and a little moving asterick while the system waits. At the same time there is a second similar message with moving asterick: "a start job is running for" and the name of the lvm device to be started. And if I define all the volumes on the lvm to be mounted in fstab, I get yet more "a start job is running" messages and hangs for them, all simultaneously.
It seems like the system is not stopping and waiting for the password, before trying to start the lvm and then hanging. I've found that I actually can type in the password while the system is stuck like this (though the screen doesn't really register that I'm typing a password) and then the system will continue and start the lvm and mount volumes properly as defined in fstab.
I don't really know much about how all this stuff works, but gather from reading around that perhaps systemd is not waiting for the password, before tying to automatically start the lvm? And tha'ts causing the hang. (I have LMDE installed with a separate /boot parition on the same number 1 drive and it boots as expected, I'm assuming this is because it's not using systemd.)
The only post that I could find that remotely seemed similar to my problem is this: https://bbs.archlinux.org/viewtopic.php?id=153811
But I don't really follow what's being said in that thread or the solution, regard the .service file. Where is is? What would I edit in it? Is that what I want to do?
Thanks to anyone for any help on this.

Well I just figured out that I put the wrong UUID in /etc/fstab. /dev/sdb1 (the disk being unlocked) != /dev/mapper/crypt2 (the unlocked partition). Now everything works as it should.
Last edited by houron102 (2012-09-14 01:19:47)

MacBook Air won't load some websites

Hi,
I've been having this issue with my new MacBook Air since I bought it a month ago and I still don't know what to do.
I'm using Safari as the main browser and I connect to the Wi-Fi network at home. It's strange, but it happens very often that I simply can't access websites like Facebook, Google, YouTube etc. on it or any other browser (I tried Mozilla, Chrome), while for example my sister with her Windows (w/Google Chrome) notebook loads these websites perfectly when we're in the same room. It is also strange because when I simply turn the wifi off on my mac and leave the browser open, the page will load itself immediately. (Of course I can't use it because I'm no longer connected to the internet...)
Can you help me with this? I believe this is a software glitch since all other (Windows) computers in my family can load the websites while using the same browser and the same network at home.
Any help is appreciated.
Thank you very much,
J.

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
They will be help you to resolve the issue.
Best.

Firefox 4.o seems to hang when loading some websites while waiting for an application called static-cdn.mozilla....

Similar Messages

Maybe you are looking for