Firefox 5 crashes to grey screen when opening from sleep mode on computer.

system... Win7 64bit
ATI 4300 video
AMD 445 cpu
Gigabyte GA870a-ud3 motherboard.
System OK with windows 4, with windows 5 when system woken from sleep mode, Firefox crashes when I try to run it. Crashes to grey screen. From cold boot it works fine. All other programs work fine. Solution?

Have you tried re-booting? Shut down the iPad completely and then restart it. It has helped me with my iPad 1.

Similar Messages

  • T60 Type 2623 Blue Screen on Resume from Sleep Mode problem solved - XP Pro

    I hope that this post ends some frustrations for some people.
    I hope that IBM deals with this issue by getting ATI to fix the video driver issue.
    After three months of tracking down blue screens when resuming from Sleep Mode and some lockups while working, I have identified the problem on my T60 Type 2623 running Windows XP-Pro and all service packs and updates.  The Sleep Mode resume issues were intermittant and it would be fine for a day or two and then reboot on Resume or reboot every time I used Resume for a while.  For months the Blue Screen would reboot and attempt to send the message to Microsoft using the logs, but the logs were always corrupted.  I disabled every driver that I could and the problem continued for months.
    The problem solution came about when I decided to try my Rhapsody Music account after many months of not using it.  I kept getting a message about DRM (Digital Right Management) being disabled and Rhapsody software could not self-fix this.  So I finally called Rhapsody and they spent over an hour with me trying to get Rhapsody to work.  The support person asked me about my computer and I noted that it was an IBM T60.  He then asked about my Video Card and I responded that it was an ATI Mobility Radeon X1300.  After a few minutes on hold he asked about my driver version which was 8.442.3-080103a1-057754C the set from January 31, 2008.  He noted that there is a known problem wit the 8.4 driver and it interferes with DRM.  He had me go to control panel Settings and Hardware and then roll-back the driver to the prior version.
    After a reboot, the DRM issue was solved and I soon discovered that my resume from Sleep mode no longer crashed.  In fact it has been fine and crash free for over a month now.  I have noted that the older driver can sometimes resize my screen to something like 600 X 800 if I close the lid under certain circumstances, but that is just a function key reset to get my normal desktop resolution back.  At least it is not a blue screen reboot with a corrupted log file.
    Message Edited by retro74 on 07-05-2008 08:50 AM
    Solved!
    Go to Solution.

    Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
    Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
    John

  • Firefox crashes windows 7 when recovering from sleep mode

    Similar to the following:
    http://support.mozilla.com/pl/forum/1/627872?s=window+7+crash&as=s
    but not sure whether it depends on pages that are currently opened.
    Sometimes, when recovering from sleep mode on win7 (with only Firefox and VS2008 running), win7 crashes. What's important - It doesn't happen always, but still, it's annoying (Firefox starts with startpage only).
    I've been noticing this issue on different Firefox versions from Firefox 3.5 to 3.6.6.

    Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.

  • Grey Screen when opening a old or new project in CS 5.1

    Grey Screen when opening a old or new project in CS 5.1....I can then click on the outside of the screen and see the project screen but as soon as I release the mouse button it goes grey again.  Any ideas?

    Does turning off OpenGL in the Performance Preferences and restarting Photoshop have any bearing on the issue?

  • Macmini 2011 on lion, goes to a blue screen om monitor when awakening from sleep mode, last 3 or 4 seconds, can anyone help? Thanks

    Macmini 2011 on lion, goes to a blue screen on monitor when awakening from sleep mode, last 3 or 4 seconds, before desktop appears, can anyone help? Thanks

    Depending on the system configuration, this may not
    be unusual.  The Mini that I use for my home theater,
    which is connected to a receiver then to a TV, all via
    HDMI usually takes a couple seconds to come up just
    the way yours does.  Same happens when I switch sources
    on the receiver.  Actually, it starts with the blue screen and
    will sometimes flash before the desktop comes up.
    It seems that when HDMI goes dormant, there is handshaking
    that needs to be re-established, at least thats my SWAG on it.
    On the other hand, the Mac Mini Server that I use as a work
    station and is connected to a Thunderbolt Display, wakes to desktop
    in a second, maybe two.  On this combo, it just comes up to
    the desk top.
    It also probably depends on what processes were active when
    the Mini was put to sleep.  So it may take some time for it to get around
    to reloading the desktop.

  • My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

    My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

    Okay, I seem to have solved the problem I posted about earlier.  I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French.  When I switched it back to American English, my password worked when waking the computer from sleep mode.  I have no idea why changing the language preference would affect the way the password works but that seems to have been the case.  I'll post again if I experience more problems.

  • Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

    Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue.  The Ext Drive worked perfectly until the upgrade..

    Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK.  I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
    I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

  • Kernel Panic when waking from sleep mode., Kernel Panic when waking from sleep mode.

    Hi,
    I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
    Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
    I am not very computer savy - I.e. I use a computer but don't know programming etc.
    The computer then asks me to shut down and restart.
    Any help would be much appreciated as this is driving me crazy.
    An example of the latest kernel panic log as as follows:
    Fri Jan  6 21:25:02 2012
    panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
    RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
    RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
    R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
    RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS:  0x0000000000000008, SS:  0x0000000000000000
    CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff808073b1e0 : 0xffffff8000220702
    0xffffff808073b260 : 0xffffff80002c266d
    0xffffff808073b400 : 0xffffff80002d7a1d
    0xffffff808073b420 : 0xffffff80002936b3
    0xffffff808073b540 : 0xffffff800029383b
    0xffffff808073b560 : 0xffffff800029485b
    0xffffff808073b590 : 0xffffff800027e44b
    0xffffff808073b5f0 : 0xffffff7f811a44dd
    0xffffff808073b630 : 0xffffff7f811a36c4
    0xffffff808073b760 : 0xffffff8000328517
    0xffffff808073b7b0 : 0xffffff80002e823b
    0xffffff808073b8a0 : 0xffffff80003170ce
    0xffffff808073b8d0 : 0xffffff80002ec664
    0xffffff808073b9e0 : 0xffffff80002f0229
    0xffffff808073ba50 : 0xffffff80002f0265
    0xffffff808073ba80 : 0xffffff80004e6833
    0xffffff808073bb50 : 0xffffff8000316ca3
    0xffffff808073bba0 : 0xffffff80005a6e29
    0xffffff808073bc30 : 0xffffff8000265675
    0xffffff808073bc80 : 0xffffff80002651f3
    0xffffff808073bcc0 : 0xffffff800026a62f
    0xffffff808073bdc0 : 0xffffff800026cdb4
    0xffffff808073bf40 : 0xffffff80002c1f0b
    0xffffff808073bfb0 : 0xffffff80002d7941
          Kernel Extensions in backtrace:
             com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
    BSD process name corresponding to current thread: corestoraged
    Boot args: 0x0
    Mac OS version:
    11C74
    Kernel version:
    Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
    System model name: iMac8,1 (Mac-F227BEC8)
    System uptime in nanoseconds: 46767492658
    last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver          1.0.2d2 (addr 0xffffff7f81930000, size 45056)
    loaded kexts:
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleHDA          2.1.3f7
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMCCSControl          1.0.26
    com.apple.kext.ATIFramebuffer          7.1.2
    com.apple.driver.AppleMuxControl          3.0.16
    com.apple.driver.AppleBacklight          170.1.9
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.ATIRadeonX2000          7.1.2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.1
    com.apple.driver.AppleLPC          1.5.3
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
    com.apple.driver.CoreStorageFsck          182.10
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.0.1
    com.apple.iokit.IOAHCIBlockStorage          2.0.1
    com.apple.driver.AppleFWOHCI          4.8.9
    com.apple.iokit.AppleYukon2          3.2.2b1
    com.apple.driver.AppleUSBHub          4.5.0
    com.apple.driver.AppleEFINVRAM          1.5.0
    com.apple.driver.AppleRTC          1.4
    com.apple.driver.AppleAHCIPort          2.2.0
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBEHCI          4.5.0
    com.apple.driver.AirPortBrcm43224          500.36.11
    com.apple.driver.AppleUSBUHCI          4.4.5
    com.apple.driver.AppleHPET          1.6
    com.apple.driver.AppleACPIButtons          1.4
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.4
    com.apple.driver.AppleAPIC          1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1
    com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
    com.apple.driver.AppleAVBAudio          1.0.0d11
    com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
    com.apple.driver.DspFuncLib          2.1.3f7
    com.apple.driver.AppleBacklightExpert          1.0.3
    com.apple.iokit.IOSurface          80.0
    com.apple.iokit.IOFireWireIP          2.2.4
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleHDAController          2.1.3f7
    com.apple.iokit.IOHDAFamily          2.1.3f7
    com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAVBFamily          1.0.0d22
    com.apple.iokit.IOEthernetAVBController          1.0.0d5
    com.apple.iokit.IOAudioFamily          1.8.3fc11
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.ApplePolicyControl          3.0.16
    com.apple.driver.AppleGraphicsControl          3.0.16
    com.apple.iokit.IONDRVSupport          2.3.2
    com.apple.kext.ATI2600Controller          7.1.2
    com.apple.kext.ATISupport          7.1.2
    com.apple.iokit.IOGraphicsFamily          2.3.2
    com.apple.driver.AppleSMC          3.1.1d8
    com.apple.driver.IOPlatformPluginFamily          4.7.5d4
    com.apple.driver.AppleFileSystemDriver          13
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
    com.apple.iokit.IOBluetoothFamily          4.0.1f4
    com.apple.driver.CoreStorage          182.10
    com.apple.iokit.IOUSBHIDDriver          4.4.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
    com.apple.iokit.IOUSBMassStorageClass          3.0.0
    com.apple.driver.AppleUSBMergeNub          4.5.3
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.7
    com.apple.iokit.IOCDStorageFamily          1.7
    com.apple.driver.XsanFilter          403
    com.apple.iokit.IOATAPIProtocolTransport          3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
    com.apple.iokit.IOFireWireFamily          4.4.5
    com.apple.iokit.IOUSBUserClient          4.5.3
    com.apple.iokit.IOAHCIFamily          2.0.7
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IO80211Family          411.1
    com.apple.iokit.IONetworkingFamily          2.0
    com.apple.iokit.IOUSBFamily          4.5.3
    com.apple.driver.AppleEFIRuntime          1.5.0
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          165.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          331
    com.apple.iokit.IOStorageFamily          1.7
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.4
    com.apple.iokit.IOPCIFamily          2.6.7
    com.apple.iokit.IOACPIFamily          1.4
    This is all double dutch to me.
    Would anyone be able to help please???
    Thank you very much !!
    Dave

    Hi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
    Dave

  • Wifi disconnects when waking from sleep mode; running Mountain Lion

    Had this same issue with Lion as well,, wifi disconnects when waking from sleep mode,,,any ideas how to fix this pesky issue?

    Hi Sky,
    This has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Screen flickers when resuming from sleep mode

    I have a newly brought T430 laptop with the Nvdia graphics card. Sometimes when I resume from sleep mode, the screen flickers before entering into the desktop view.
    Is this a problem or normal? I hope nothing is wrong with my gpu. Is there a way to check?
    Thanks!

    etresoft wrote:
    It is definitely not a Leopard bug because it has been happening on every portable Mac I've ever had.
    I don't agree. I had no problems at all with my MacBook Pro running Tiger. I initially did an upgrade from Tiger to Leopard and when the problems started I assumed it was a problem with the upgrade. I then completely erased and did a clean install of Leopard. The problem has actually gotten worse since I did the clean re-install.
    etresoft wrote:
    Just close the screen, wait for it to go back to sleep, then open it again. It will probably be fine.
    As I mentioned in my opening post, I've gone through that song and dance more times than I can count. I've closed it, waited for as much as an hour, opened it back up...same problem. I've hard powered it down, closed it, disconnected the AC adapter, removed the battery, opened it, held down the power button for 15 seconds, re-installed the battery, reconnected the AC adapter, pushed the power button, and the display will still be dark. It's sometimes taken as many as 5 or 6 iterations of that process before it will finally reset whatever problem it was having and boot normally with a functioning display.

  • Why is my Macbook Pro running so slow when returning from sleep mode?

    I got my new Macbook this past Christmas so it is about two months old. I have the 13" Macbook with the standard 4GB of RAM (not sure if that matters), but when I got my mac I downloaded a bunch of games and such which may have slowed it down initially, though I have downloaded OnyX and Appzapper to uninstall apps and clean my computer. Also I have deleted EVERYTHING from "Login Items" which I thought might help. Basically whenever I am done using my computer I just shut the screen, I don't shut it down or actually click "Sleep Mode" so I'm not sure if shutting the screen puts it in "Sleep Mode," but whenever I open my computer back up I get that spinning loading icon when I click on anything on my desktop and it usually takes 5-10 minutes of this super slow loading before I can actually use my computer. Not sure what the deal is but it is clearly super annoying and I'm hoping to find out how to get around this. I have six 2GB sticks of RAM that I am hoping to trade for two 4GB sticks of RAM to speed up my computer but I am not sure if that would even fix my problem. This is my first Macbook, besides my mothers Mac desktop that I have been using for years throughout High School, but I am a windows guy. I consider myself pretty good with computers, not an expert but I can fix 95% of the problems I encounter, but this one has been stumping me! Thanks a million in advance!

    Hello Linc -
    I hope you don't mind but I have a similar issue. Might I be able to enlist your assistance with this issue? I've done as you said, and I have copied the approximate range of messages during my most recent incident. What I'm noticing is that my Mac is staying busy even while asleep. I'm concerned about this behavior, hoping you might be able to help debug the situation and set me on a good path to resolution.
    Here's my data (I don't know for certain that I grabbed the proper amount or range of data, but hoping this will help):
    6/4/14 10:06:06.287 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    6/4/14 10:06:06.519 PM soagent[231]: [Warning] Services all disappeared, removing all dependent devices
    6/4/14 10:06:06.881 PM HyperDock Helper[275]: couldn't get dock children!
    6/4/14 10:06:08.414 PM syncdefaultsd[264]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
    6/4/14 10:06:09.178 PM com.apple.internetaccounts[290]: [Warning] Services all disappeared, removing all dependent devices
    6/4/14 10:06:12.882 PM HyperDock Helper[275]: couldn't get dock children!
    6/4/14 10:06:12.882 PM HyperDock Helper[275]: empty dock rect!
    6/4/14 10:06:13.091 PM com.apple.SecurityServer[27]: Session 100014 created
    6/4/14 10:06:15.150 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/4/14 10:06:17.089 PM com.apple.NotesMigratorService[318]: Joined Aqua audit session
    6/4/14 10:06:24.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=330[ksadmin] final status 0x0, allowing (remove VALID) page
    6/4/14 10:06:25.057 PM com.apple.SecurityServer[27]: Session 100003 created
    6/4/14 10:06:26.712 PM com.apple.IconServicesAgent[293]: main Failed to composit image for binding VariantBinding [0x143] flags: 0x8 binding: FileInfoBinding [0x351] - extension: log, UTI: com.apple.log, fileType: ????.
    6/4/14 10:06:26.712 PM quicklookd[307]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: log, UTI: com.apple.log, fileType: ???? request size:128 scale: 1
    6/4/14 10:06:27.190 PM com.apple.IconServicesAgent[293]: main Failed to composit image for binding VariantBinding [0x24b] flags: 0x8 binding: FileInfoBinding [0x353] - extension: jpg, UTI: public.jpeg, fileType: ????.
    6/4/14 10:06:27.191 PM quicklookd[307]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xc03] flags: 0x8 binding: FileInfoBinding [0xb03] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:128 scale: 1
    6/4/14 10:06:27.594 PM HyperDock Helper[275]: dockRunloop exited!
    6/4/14 10:06:27.687 PM WindowServer[103]: disable_update_timeout: UI updates were forcibly disabled by application "Dropbox" for over 1.00 seconds. Server has re-enabled them.
    6/4/14 10:06:28.666 PM AddressBookManager[316]: Validate metadata timed out, cancelling
    6/4/14 10:06:30.082 PM WindowServer[103]: common_reenable_update: UI updates were finally reenabled by application "Dropbox" after 3.40 seconds (server forcibly re-enabled them after 1.00 seconds)
    6/4/14 10:06:39.079 PM Dropbox[274]: PyObjCPointer created: at 0xcc3fc88 of type {OpaqueJSContext=}
    6/4/14 10:06:47.000 PM kernel[0]: fsevents: watcher dbfseventsd (pid: 347) - Using /dev/fsevents directly is unsupported.  Migrate to FSEventsFramework
    6/4/14 10:06:58.966 PM Dropbox[274]: ICARegisterForEventNotification-Has been deprecated since 10.5.  Calls to this function in the future may crash this application.  Please move to ImageCaptureCore
    6/4/14 10:07:07.421 PM Creative Cloud[252]: objc[252]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
    6/4/14 10:07:07.421 PM Creative Cloud[252]: objc[252]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
    6/4/14 10:07:13.408 PM Creative Cloud[252]: file path : file:///Applications/Utilities/Adobe Creative Cloud/ACC/resource/SelfUpdate/html/selfUpdateScreen.html?locale=en_US
    6/4/14 10:07:13.479 PM Creative Cloud[252]: size: 440.000000, 664.000000
    6/4/14 10:07:14.280 PM apsd[63]: Failed to send activation record to service com.apple.ManagedClient.enroll
    6/4/14 10:07:16.843 PM Adobe CEF Helper[359]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
    6/4/14 10:07:26.859 PM Adobe CEF Helper[359]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
    6/4/14 10:07:28.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=364[ksadmin] final status 0x0, allowing (remove VALID) page
    6/4/14 10:07:29.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=365[ksadmin] final status 0x0, allowing (remove VALID) page
    6/4/14 10:07:29.000 PM kernel[0]: nspace-handler-unblock: did not find token 1531
    6/4/14 10:07:29.821 PM com.apple.mtmd[37]: handler unblock failed. (status=-1/errno=2/token=1531/fd=4)
    6/4/14 10:07:31.773 PM System Events[363]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
    6/4/14 10:07:31.773 PM System Events[363]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
    6/4/14 10:08:10.728 PM WindowServer[103]: disable_update_timeout: UI updates were forcibly disabled by application "Google Chrome" for over 1.00 seconds. Server has re-enabled them.
    6/4/14 10:08:13.572 PM WindowServer[103]: common_reenable_update: UI updates were finally reenabled by application "Google Chrome" after 3.85 seconds (server forcibly re-enabled them after 1.00 seconds)
    6/4/14 10:08:24.544 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/4/14 10:08:33.130 PM VDCAssistant[370]: AVF encoder error: fail to create accelerator instance
    6/4/14 10:08:33.432 PM VDCAssistant[370]: AVF encoder error: fail to create accelerator instance
    6/4/14 10:08:42.340 PM ntpd[131]: ntpd: time set +0.479444 s
    6/4/14 10:08:42.372 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/4/14 10:08:42.375 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    6/4/14 10:09:04.258 PM mds[38]: (Normal) Volume: volume:0x7fc5fc894000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.is9q0A
    6/4/14 10:09:55.988 PM fontd[212]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
    6/4/14 10:10:00.000 PM kernel[0]: process Creative Cloud[252] caught causing excessive wakeups. Observed wakeups rate (per sec): 175; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45095
    6/4/14 10:10:00.943 PM ReportCrash[380]: Invoking spindump for pid=252 wakeups_rate=175 duration=258 because of excessive wakeups
    6/4/14 10:12:07.846 PM ntpd[131]: FREQ state ignoring +0.080428 s
    6/4/14 10:12:45.031 PM mds_stores[89]: (Error) SecureStore: Access token 7 changed uid from -1 to 501
    6/4/14 10:13:16.989 PM ntpd[131]: FREQ state ignoring +0.109128 s
    6/4/14 10:14:53.101 PM ntpd[131]: FREQ state ignoring +0.148578 s
    6/4/14 10:17:30.190 PM ntpd[131]: FREQ state ignoring +0.207557 s
    6/4/14 10:20:22.536 PM configd[57]: network changed: v4(en1-:192.168.1.159) v6(en1:2602:306:ce95:48a0:1240:f3ff:fea1:8e1e) DNS! Proxy SMB
    6/4/14 10:20:22.541 PM netbiosd[184]: network_reachability_changed : network is not reachable, netbiosd is shutting down
    6/4/14 10:20:25.616 PM configd[57]: network changed: v4(en1+:192.168.1.159) v6(en1:2602:306:ce95:48a0:1240:f3ff:fea1:8e1e) DNS! Proxy SMB
    6/4/14 10:20:29.454 PM apsd[63]: Unrecognized leaf certificate
    6/4/14 10:20:32.011 PM com.apple.launchd.peruser.501[201]: (com.google.Chrome.31536[278]) Job appears to have crashed: Bus error: 10
    6/4/14 10:20:34.500 PM ReportCrash[410]: Saved crash report for Google Chrome[278] version 35.0.1916.114 (1916.114) to /Users/colton/Library/Logs/DiagnosticReports/Google Chrome_2014-06-04-222034_Coltons-MacBook-Pro-2.crash

  • Thin vertical lines appearing on screen, since wakeup from sleep mode.

    My Mac G5, 2GHz, DVD-R, 1GB DDR RAM, OSX 10.4.10, ATI RADEON X800 XT has recently developed a display issue. On start-up the screen shows vertical lines across the entire screen. The colors of theses lines is varying from green to black, depending of the background color. The lines are appearing from the grey loading screen and when a profile is logged in.
    Shutting down and restarting doesn't cure the problem, nor does staring in safe mode nor starting up from an install CD. I also tried re-installing the operating system, but I get the same result. I tried another monitor but I also get the lines on screen. I verified all the cables and that the graphic card is well in place in the pci slot.
    If I change the resolution, I also get thoses lines but they change place on screen. Also, if I set the colors level to 256 colors, I get very little single lines but If I set the color level to the highest (36,7 Millions), the lines appears in group of 5+ and are all over the screen.
    I tried taking a screenshot using the shortcut cmd-shift-3 and I can see the line in the pictures. Also, if I take a screenshot of a window that is behind the window in the front ( using cmd-shift-4-space ), I dont see the line on the screen shot.
    I started to have this problem when my mac was woke up from sleep mode and the problem has persisted since then.
    I guess my problem is the graphic card but I would like an external opinion before I got buy another one.
    Thanks

    Any new results?
    I'm having the same issue. Looks like this, but at a slight angle and different RGB colors (almost like JPG artifacting).
    Started this evening after a cold boot. I just put my X800 XT Mac G5 edition in 2 weeks ago. No real heavy use either, as I've been gone for a week.
    Looks to me like bad VRAM (according to TechTool Deluxe). I'm running the AHT now and will hopefully come to a final conclusion soon. I did test my 20" Apple monitor (DVI) with my laptop and there was no problem...so it is definitely the video card. Not sure if the aforementioned ATI ROM extender will fix it or not.
    Much luck to all of us who are having this problem.

  • Error in AJAX call when resume from Sleep mode?

    We have developed a HTML5 web app and added it to home screen the app is working fine. But the AJAX call is not working when we resume the app from SLEEP MODE. If the app keep opened.
    THIS ISSUE COMES ONLY IN iOS8.
    Please give the solution for the above issue.
    Thanks
    Harish S

    Sounds like maybe the eject mecinisim is stuck..? Try inserting a CD or DVD and then Eject it to see if that makes a difference.
    If not, try reseting both the SMC and PRAM
    as per > Resetting the System Management Controller
    and > Resetting your Mac's PRAM
    Then if it is still acting up, contact Apple or your local AASP
    at > Apple - Support - iMac - Service FAQ

  • Black screen after waking from sleep mode - Compaq Presario CQ5110F

    My mother's computer has been having the problem listed in the subject -- after waking from sleep mode, the monitor just stays black, and won't come back. After trying everything I could find online, I eventually found the bios update which claims to fix the exact issue. The problem is that I guess my mother had opted to upgrade to Windows 7, while the bios update seems to only work for Windows Vista, as I get the following error message: "Your system does not meet the minimum requirements for this update. Update has been canceleld. (9998)." I've tried running the update in Vista compatibility mode, with no luck. I've tried using a different monitor, I've updated all the drivers, Windows Updates are all current, I've cleared CMOS. Any idea on how to fix this? It's very recent; only for about the past 2 weeks has this been happening, while we've had the computer for over 3 years. It's quite a waste of energy to keep it on all day.

    Hello liltwix,
    When taking your computer out of safe mode the screen just remains black, is that correct? I will try to help you with this issue.
    I understand you upgraded from Vista to 7, was that when the issue started or has the computer had windows 7 installed for some time before this problem started?
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • BT Keyboard Loses Connection When Waking from Sleep Mode

    I'm running Windows 7 on a late 2009 27" iMac and my Bluetooth keyboard keeps loses connection when I wake my computer from sleep mode. Usually the only way I can get it back is my resetting. Anyone know of a way to fix this? Any help would be great appreciated.

    If the MBP doesn't wake when you open the lid but does when you press any key afterward, do this:
    Applications > Utilities > Terminal
    Copy and paste the following text in the Terminal window:
    *sudo pmset lidwake 1*
    You'll be asked for your admin password. Type that in (Note: the password will not be displayed as you do so). Press Return, and quit the Terminal. Close the MBP, wait for it to sleep, and open it again. Does it wake now?
    If you want to change it back so the system doesn't wake when you open the lid, repeat the procedure, but this time type or paste:
    *sudo pmset lidwake 0*

Maybe you are looking for

  • Discount problem in Pricing procedure

    Hi experts,           Vendor offers % discount on Basic price, however tax is calculated on BASIC price (not considering discount).           I am facing following problems 1.    I tried to configure pricing procedure , but discount gets deducted whi

  • Two Transformations

    For a Testing purpose I had the following scenario Block 1 1) Receive step (Empno, Empname) Test_MI 2) Transformation ( Simple Transformation [Empno Concat Empno into Empno, Empname to Empname (Result)] END Block 1 Block 2 3) Transformation (Result f

  • Filtering Users in Who Does What Report

    Hello! I'm using a shared resource pool, and we list out every staff member in the company. When I assign specific people from the pool to my project, and run the "Who Does What" report, I end up with people who are not allocated to my project (they

  • Freezing When Opening a V.5 Project in 7.0.2

    Need to return to an old project, about 4 years old (version 5). As to not mess up my original file, I've made a copy. When I click "yes" to updating the project file, the wheel spins and the program freezes. I know there must be an easy solution to

  • HT4623 ive tried to update my iphone 16gb but it freezers on the instalment why?

    my mum got given a iphone 3gs 16gb for christmas and it needed updating to 6.1.0 so we updated it  but it just freezers when installing it all the screen is just the apple sign with a loading bar and stops half way thru can you help??