Firefox 7.1 does not save the tab groups

i have windows 10 and firefox 7.1

'''azizy.aris'''.....I have done EXACTLY what you have said and perhaps it has helped others but it has NOT helped me. Could you perhaps think of anything else that may be causing this??? I was saving them for awhile but all of a sudden it stopped. Do you think it's because I have the Firefox v. 4 Optimized for Yahoo!? I don't remember if it worked prior to me updating to the version for Yahoo or not. Any help you can give me would be GREATLY appreciated!!!
Thank you in advance for all your and anyone else's help.
Christine ♥

Similar Messages

Firefox 4.0 does not SAVE my tabs on Exit : (

I just upgraded to Firefox 4.0 on my Windows 7 desktop. I had to close Firefox for an add-on to install and it wiped out ALL of my tabs I had open!! NOT Happy : (
I have searched thru the options, Help menu (all it says it may be a problems with the setting but doesn't tell me how to fix it) and I looked thru the forum. I have not been able to find a way to set it so it will SAVE my TABS on EXIT.
I am running 4.0 on my laptop and it always saves my tabs on exit.
Please let me know what I need to do to fix this problem. As I already said...I am NOT Happy : (
Thank you.

I had the same problem do this
http://www.raymond.cc/blog/archives/2011/03/23/enable-save-tabs-on-exit-for-firefox-4/
I do what this guy said and it is allright again

Firefox does not save my tabs and windows from last time when I start it although i have already set it so (on Macbook)

Firefox does not save my tabs and windows from last time, although i have already set it so (on a Macbook) (newest version)

If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Recording does not save the file

We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!

Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick

Why the "Actions" does not save the Overprint Black

Hi!
Ai CC 17.0.0
Why the "Actions" does not save the Overprint Black?
I can not create an action that will automate this time a very common activity?
Why?
Best Regards!

I was just able to. I am in Illustrator 6 on a Mac OS 10.6. I started a new action and went through the menu just like your screen shot, chose my options and clicked ok, then stopped recording the action.
I found to use the action I had to have something selected.
I see that you are in Illustrator CC, perhaps there is a difference there. But for the record, on my system, it worked.

Firefox does not save my tabs or sessions when I shut down my computer

To be more clear:
Yes, I have set my options to "show windows and tabs from last time".
No, I did not check "clear memory on shut down" or "start private session"
Also, it saves my tabs when I restart the browser, but when I shut down my computer and start up again, Firefox does not show my tabs from last time. The same thing happens with sites I've logged onto before; it logs me out after I shut down my computer.

Did you check the "Clear Recent History" settings to be sure cthat you do not clear the Browser history and the cookies?
See [[Clear Recent History]]

Clinking on the X does not close the Tab

Recently I had to run the Loaris Trojan remover to get rid of something that hijacked my home page and search engine. I also had to reset the Firefox defaults. Somewhere in there I lost the ability to close a Tab by clicking on the X. The X is there but it does no close the Tab when I click on it. The only way I can close Tabs is to completely Exit Firefox and relaunch.
How do I restore closing Tabs?

Did you try the '''safe mode''' option ?
Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Thank you.

TS1398 ipod touch does not save the password of the wifi

my ipod touch 4g does not save my home wifi password but in my bussines it does please help

Two things to try:
If your router is set to hide its SSID (network name) then go into the router's administration and change this setting. For some reason, this can cause problems with iOS devices remembering the network password. There's really no need to hide your network name, there are (or were) apps that could show you any and all Wi-Fi networks within range, even if they're hidden.
If you're using WEP encryption, try using WPA2. It is much more secure and seems to play nicer with iOS devices.

Read It Later plugin does not save the tags for web sites all the time

Read It Later does not preserve the tags assigned to websites in some cases. Sometimes I go through the list, assign tags, close the browser hoping it would write all the changes to the internal database (readItLater.sqlite) and after reopening the browser, some sites have the tags and some don't.

@Swarnava. Thank you, but for now I would disregard your response, since I'm not planning to upgrade and I've seen posts where people have the same issues with the latest version of 8.0.1

Not liking the Tab Group option. Would just like a second row of tabs.

Previous suggestion was to use Tab Groups. (Oh and I did upgrade Firefox)
After playing with the Tab Group option features, it's just not what I'm looking for, or something that would best suit my desires and needs.
Would just like to create a second line of tabs after the first line exceeds the regular window size. Similar to just like adding a tool bar at the top of the page.
Wouldn't think doing such a thing would be a big issue. I'm sure Tab Group windows works great for some, but just not for me.
Wouldn't want to 'squeeze' each tab down so they will all fit across the window, like what happens in the lower taskbar as more and more windows are opened either. It would get to a point to where you couldn't read what the tabs are for.
I think an option for a second line of tabs would be ideal when one needs to have more than 6 tabs opened.
Does this option even exist in Firefox? If so, how can I set it up? If not, how does one suggest a feature like this to Firefox?

You need an extension the get support for a multi-row tab bar.
See:
*Tab Utilities: https://addons.mozilla.org/firefox/addon/tab-utilities/
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

Firefox 4 crashes all the time in addition it does not save my tabs when it says it will restore them

So I am surfing the net or watching something online then all of a sudden firefox 4 crashes it says its suppose to restore my tabs but it never does. please i want this fixed it is so annoying in addition my tabs do not save any more like they used to. like when you hit exist it suppose to ask if you want to save well it dosen't. Yes I have gone to your support page and literally done everything it said to do but none of it worked. so please help me on that too if possible.

I've had it crash on me about 10 times today. This is ridiculous. I've used firefox for years and never had as many issues with it as I have had with the latest updates. It's really disgusting how bad it is. I stopped using shittysoft internet exploder because it was so bad, but I may go back to it. I won't keep using shittyfox if they can't get it to work smoothly. This is pathetic.

I was using Firefox 4, which had the google toolbar and I accidentally updated to firefox 5, which does not have the toolbar and without the toolbar, I feel handicapped using the browser. Is there any way I can go back to Firefox 4??...Pls urgent...

I am a medical transcriptionist. I was using Firefox 4 and without knowing that Firefox 5 does not support Google Toolbar I updated it. Searching in google is a integral part of my job and without the Toolbar I feel handicapped using Firefox 5. You can say that there is no need for toolbar in firefox 5 as the address bar doubles as toolbar, but I find it very difficult using it. I uninstalled Firefox 5 and try installing Firefox 4 version, but I am not able to. So, I have uninstalled Firefox 4 completely. So, pls advise if there is a way for me to get back my Firefox 4. Tx in advance for your help.

-> Uninstalling Firefox on Windows
* http://kb.mozillazine.org/Uninstalling_Firefox
-> Starting with the release of Firefox 5, the previous version of Firefox (Firefox 4 in this case) will no longer be maintained with security and stability updates. Firefox 3.6 is the last previous Firefox version that is still being maintained. To downgrade to Firefox 3.6, download and run its installer from:
* http://www.mozilla.com/en-US/firefox/all-older.html
'''Warning: Firefox 3.6 will only be maintained with security and stability updates for a short period of time.'''
-> Installing Firefox on Windows
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

Two issues, firefox crashes and does not close the process

I am a web developer, so I am contently messing about with websites,
I start firefox and open up wordpress for example and also have filezilla open and notepad++ on my computer as well as firefox all at the same time.
I edit something and refresh firefox, it hangs, but it does not stop hanging so I have to restart firefox, but the process is still running so I have to stop the process from task manager in order to restart firefox again.
This should not happen, not only does it happen regularly but it happens after refreshing pages after an edit
of course I have tried switching off plugins and even my internet security but its still doing it. I have taken to using opera instead of firefox when developing websites but I much prefer firefox layout..
I need all these programs open by the way in order to achieve my work.
any ideas ?.. thanks

I am a web developer, so I am contently messing about with websites,
I start firefox and open up wordpress for example and also have filezilla open and notepad++ on my computer as well as firefox all at the same time.
I edit something and refresh firefox, it hangs, but it does not stop hanging so I have to restart firefox, but the process is still running so I have to stop the process from task manager in order to restart firefox again.
This should not happen, not only does it happen regularly but it happens after refreshing pages after an edit
of course I have tried switching off plugins and even my internet security but its still doing it. I have taken to using opera instead of firefox when developing websites but I much prefer firefox layout..
I need all these programs open by the way in order to achieve my work.
any ideas ?.. thanks

Exchange 2013 enable forwarding option does not save the recipient address

Hi,
I am having issue on Exchange 2013 that unable to save forwarding recipient address in mail flow option. While browsing on Forward address and select recipient address it shows the blank and do not show the address.
Can anyone suggest how to save the recipient address in mail flow.
Thanks

Hello Nithyanandham,
I solved the issue that it is IE browser issue. I logged in with FireFox and access the mail flow and entered the recipient forwarding address it saved and email now
sending to the forwarding address.
Thanks for your kind support and help

Firefox 7.1 does not save the tab groups

Similar Messages

Maybe you are looking for