Firefox 7 installed, can`t get online help in any Office 2007 application.

When I press F1 in Word, Excel etc, a window displays asking run, save or cancel Transition.htm a firefox document.

So am I screwed here guys or what?  I found a temporary solution by hardwiring into the modem, but my landlord needs to use the Airport Express, which doesn't have an ethernet port for plugging into.
Should I buy an Airport Card to put in the Mac Pro?  Or an Airport Extreme base with hard wire ports to plug into?
Please help!  Tony

Similar Messages

  • Where can i get online Help on DBMS_OUTPUT.ENABLE????

    Plz do help me in getting to online help documentation of
    DBMS_OUTPUT package...
    Very urgent!!
    I've to enable/disable SERVEROUTPUT dynamically
    Plz send me any suggestions if any regarding this...
    Regards

    This can only be done in SQL-SESSION.
    Refer --> pkg dbms_output.enable(size of buffer) -> to enable
    pkg dbms_output.disable -> to disable.
    good luck
    =dimple

  • Where can i get online help!?

    can anyone tell me?!
    thxxxxxxxxxxx!=]
    512Mb    

    Here, of course.
    Or here:
    iPod Troubleshooting
    As a couple of suggestions.
    Good luck
    srb

  • Can't get online- even with strong signal- HELP PLEASE!!!

    I have an ibook G4 with an Airport Extreme Card. For the past few months I have been able to go online at home, with absolutely no problems. My desktop at home is a PC with high-speed modem and a wireless router connected. I also travel to school on a regular basis and can connect wirelessly there as well. My problem is, that for the past few days, I can't get online at home. I have a strong signal with the airport card, but both Safari and Firefox say "not connected to the internet" and tell me to refer to Network Diagnostics. I can't figure out why I can't get online. I have been at school during this time with the same laptop and have gone online with no problems at all. Not only that, but both my desktop at home, along with another laptop with wireless capabilities can also go online with no difficulties. I am new to Mac's so I don't have alot of knowledge. I am not sure if maybe my Network settings are wrong?? Any advice anyone could give would be sooo helpful. I have been pulling my hair out for days over this!

    Try the following:
    Delete Preferred Network(s)
    - System Preferences > Network > AirPort > Configure
    - In the "By default, join:" pull-down menu, select "Preferred networks"
    - Delete the network(s) you regularly use from the list
    Delete AirPort Keychain Entries
    - Launch the "Keychain Access" application located in Applications/Utilties.
    - Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    - Restart, or log out then back in.
    Add Preferred Network(s)
    - System Preferences > Network > AirPort > Configure
    - In the "By default, join:" pull-down menu, select "Preferred networks"
    - Add the preferred network(s) using the "+" button.
    - Restart or log out then back in.

  • I tried to update iTunes witht he latest version and I got a message saying that - MSVCR80.dll was not installed. I think I successfully installed that through an online help website but I now get R6034 - C\Program Files(x86)\iTunes\iTunes.exe

    I tried to update iTunes with the latest version and I got a message saying that - MSVCR80.dll was not installed. I think I successfully installed that through an online help website but I now get R6034 - C\Program Files(x86)\iTunes\iTunes.exe

    Hello Bignige52,
    The following article provides steps and information that can help get iTunes updated and working.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • I have been trying to install firefox but when l get to the setup type, firefox tells me to close firefox to proceed with installation, when l do it ask me if l want to cancel, l want firefox but l can't get it. tell me what to do next.

    I am trying to install firefox and l can't get pass setup type on the type of setup whih is standard and then it tells me to close firefox so it can proceed with installation, when l do, it ask me do l want to cancel installation, if l say no then it tells me again to close firefox.

    I want to make sure you're using the auto-update system, because that's the safest most reliable way to go, and it shouldn't appear in the download manager, so I lets make sure you're doing it right. <br/>
    This is a screencast I made a couple of years ago. It refers to 3.5 and 3.6, but the steps are still the same: http://ilias.ca/screencasts/ISUHD45.mov
    If that doesn't work, then maybe your Snow Leopard account doesn't have permission to update applications?

  • Since I installed Lion, I can't get online with ichat - shows ichat as offline or disconnected when I open the app.

    Since I installed Lion, I can't get online with ichat - shows ichat as offline or disconnected when I open the app.

    Hi,
    Also try turning Off Face Time
    Open Face Time
    Go to the Preferences
    Set it to Off.
    Also make sure your router has the Time and Date/Time Zone set as this upsets Face Time which in turn upsets IChat
    9:28 PM      Tuesday; August 16, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Just installed Firefox 5 and can't get in due to message the+procedure+entry+point+sqlite3_db_status+could+not+be+located+n+the+dynamic+link+library+mozsglite3.dll

    Just installed the latest version of Mozilla Firefox and now can't get into Firefox due to the following error message, The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsglite3.dll.

    Just installed the latest version of Mozilla Firefox and now can't get into Firefox due to the following error message, The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsglite3.dll.

  • How can I get technical help with phone. can i do it online

    I tried phoning EE technical help from landline, after an eternity a computerised voice said sorry you have problem try again later. Can i get tech help for problem with my phone online, thank you

    Yes, try DEVICE HELP

  • Trying to activate newly installed Acrobat 11 but can't access internet thru program - can otherwise get online with no probs

    trying to activate newly installed Acrobat 11 but can't access internet thru program - can otherwise get online with no probs. any suggestions?

    Hey Marina Hannwacker,
    I would recommend you to Refer this link - Offline Activation and let me know if it works for you.
    Regards,
    Rahul Tyagi

  • How to get online help when creat new filter files in EDS?

    I want to creat some my own filter files in order to get Event report from network management station when some special situations appear.
    I have run /opt/CSCOpx/bineds -filter,and the Named Filter window appears,I select new a file,later select "add Generic events",during this course I tried to get online help with Help Icon, but the messages:"could not run netscape to display help netscape:not found."appears.
    But I have install the netscape in the directory /opt/netscape, why it can't be found?I want to know whether there is some conf file in some place that has named a path name for the netscape diffrent from /opt/netscape.Is ther any such files?Thanks very much!

    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
    If anyone else in the forum has some advice, please reply to this thread.
    Thank you for posting.

  • Mozilla didn't work, I deleted it thinking I could download a better version. Since I can't get online, I can't do that. Now what do I do?

    Mozilla didn't work so I deleted it thinking I could download a newer version. Since I can't get online, I can't do that. Now what do I do?

    Are you trying to reinstall Firefox? If you open up Internet Explorer on your computer, can you get online? If you can't get online there then you likely have some sort of connection issue.
    If you Can get online with Internet Explorer, simply go to [http://www.getfirefox.com www.getfirefox.com], and press the Download Now button. Click "Run" then install Firefox on your machine. If you still have troubles after installing Firefox, please let me know and we can fix those.
    [[Installing Firefox on Windows|Installing Firefox on Windows]] has detailed installation information if you would like to read it.

  • Can't get online after switching from a Dell

    Can anyone help me?
    I just switched to a PowerBook G4 from using a Dell, and now I can't get online. I'm using a cable modem, but apparently my Apple won't recognize it. I talked to Apple tech support for over an hour, and they sent me to the Apple store who, of course, couldn't duplicate my problem. The guy at the store said this happens a lot when you switch from a Windows machine to a Mac because the modem "knows" which computer it should be trying to connect to. My Apple won't receive an IP address from the modem, and neither Apple nor my cable company can fix it. I've never used an Apple before and I'm getting really frustrated!
    PowerBook G4   Mac OS X (10.4.6)  

    You're welcome.
    Copied from the link I provided.
    The Apple Hardware Test was originally distributed on a separate Apple Hardware Test CD. The latest Macs distribute the Apple Hardware Test on a special volume on the Software Restore and Install DVD. Each Apple Hardware Test is specific to the type and model of Mac with which it was distributed.
    Since the Apple Hardware Test is included on the Software Restore and Install DVD that shipped with your Mac when purchased, Apple won't just send you another one.
    Your employer needs to give you the OS X install package that shipped with this Mac when purchased to keep handy. Although there is an alternative, to run Disk First Aid repair on the hard drive to check for any hard drive directory problems requires booting the computer from the OS X install disc #1 that shipped with this Mac when purchased.
    Check Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures with instructions for running Disk First Aid repair on the hard drive.
    This is also recommended before installing a major OS X update such as 10.4.6 or 10.4.7 which is expected to be released soon.
    See Installing software updates for future reference.
    Since you are new to Macs and OS X, check Maintaining Mac OS X for recommended maintenance for OS X which isn't much but also good info to know for future reference.

  • I reset my WRT54G and now I can't get online.

    I did a factory reset of my WRT54G v.2 last night after I was unable to access the router's setting to set up a WEP password (couldn't remember login/pass and the default login wasn't working) and now I can not connect to the internet through my router.
    -I have no problem getting online when I run directly through my DSL modem.
    -I called my ISP to see what they recommended- someone told me perhaps a modem reset would help. I'm on a DSL modem, which they had me configure to PPOE. I set up the router for PPOE under the basic settings tab, adding my user name and password. I changed no other settings. Basically my ISP said everything was normal on their end.
    -I've Downloaded the firmware and updated that through the router
    -When the router is fully connected there are no light anomalies that I know of (WLAN light and 1 & 2 ports are solid, internet light blinks once every 5 seconds or so).
    -I've tried powering down, unplugging, and waiting- all the usual tips.
    -My wireless computers acknowledge the router's existence, but like the wired computers, are unable to connect to the internet.
    -On my network's properties the number of packets sent and received climbs at a very small rate, but they do increase (I'm told that activity is a good sign).
    -One of the oddest things is, when I attempt to run the installation software, when connected to the internet directly through my modem, as suggested by the installation wizard, the first step that attempts to check for an internet connection says it can't find a connection even though I can browse the web perfectly fine.
    EDIT: I think this might be caused by my ethernet cable/network running through a secondary port in the back of my PC. The start up disk is looking for a signal from the default/1st port and therefore getting no connection, even though my computer is online. Will have to check this later.
    -When connected to my modem, I run cmd then ipconfig, my IP address is
    192.168.1.13, is there something I need to do with this in the router set up?
    Does anyone have any idea what I could be doing differently? I've reset my router before and never been this stuck. I called customer support but they basically wanted $40 to troubleshoot my router as the warranty has expired and I'd almost rather just buy a new one.
    Message Edited by Writersbloc on 09-24-2008 08:46 PM
    Message Edited by Writersbloc on 09-25-2008 08:22 AM

    "You have to change your router's IP address to be able to access it. It will not give you the internet."
    I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
    "Log on to your router and change two settings.
    Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
    Click on Advance Routing and change the setting from Gateway to Router then click on save."
    I did this and still same results as far as I can tell. Can't get online through the router.
    "Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
    If getting IP in public range .... try going online ...."
    I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
    I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
    Here's what my basic setup looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
    Here's what the advanced tab looks like now:
    http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
    Modem setup looks the same
    Message Edited by Writersbloc on 09-25-2008 07:05 PM

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

Maybe you are looking for

  • Add-On Deployment Error 'System.NotSupportedException'

    Created setup files to install the Add-ons. I used the Professional Installer method using .Net2.0. I could successfully create the installer and created the ard file. Registered successfully in SAP B1. During the installation i am getting the follow

  • Access database issue in SQL Plus

    Hi Friends, I download a oracle 10g to install sql Plus without create database. (I download client and does not find SQL Plus) I can ping database server from client PC and also set up a TNS. However I got a error ORA 12504 --TNS:listener was not st

  • Iweb hates me! Can't publish at all to Godaddy

    I have a username, password, domain name, and hosting account through godaddy. All I want is to publish my iWeb site to my registered domain name. All I get are error messages that a connection could not be determined to my domain. I have changed my

  • Converting a .numbers file to an image?

    I have a spreadsheet that I will be updating every so often that I want to present to a group of people on a message board as an image. Is there a way to convert a .numbers file to an image, or can I convert to an image once I convert the .numbers to

  • Getting slower speeds if using Apple Time Capsule?...

    Hi. Have had Infinity2 for a couple of weeks and am happy with the sevice - much faster than my old Virgin cable. When the engineer came he installed the white modem box and connected it to a Home Hub 4. With Virgin I used the Superhub in "modem" mod