Firefox 7 is very slow in opening webpages as compared o firefox6

As compared to firefox6, this version, ff ver # 7.0.1 is very slow in opening the webpages. It takes a long time to show the webpage. I have tried to disable add ons and did everything i could,but there seems to be a no solution.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
See also:
*http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Similar Messages

  • Firefox 12 is very slow to load pages and if two tabs are opening it lags.

    Firefox 12 is very slow to load pages and if two tabs are opening it lags. I've tried everything (e.g virus, defrag, I've created a new profile in "run", etc). I've had my router/line etc all checked and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help as it's driving me nuts.

    I have the exact same problem.
    Not only does it load pages very slowly, sometimes the page will stop for a good 45 seconds and stop loading, only to finish it much later.
    Something is wrong with Firefox 12, it shouldn't be this slow.
    How is that each version is progressively worse than the one before it?.
    Stop releasing so many versions Mozilla, release one that works and build from there.

  • After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?

    After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?
      Model Name: MacBook Air
      Model Identifier: MacBookAir6,1
      Processor Name: Intel Core i5
      Processor Speed: 1.3 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 3 MB
      Memory: 4 GB

    Hi ..
    Better to troubleshoot Yosemite.
    Not enough free storage space can slow your Mac down.
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.   OS X Tips Where did my Disk Space go?
    As for Safari, might be a cookies, cache, extensions, or plug-ins issue.
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • Very slow to open new window

    How to fix very slow opening window. I have vista 64. Since the last foxfire update it is very slow to open new windows. It can take some windows opening over a minute to open. (yes minutes not seconds)
    Once a window is open I can open in new tab with no problem, but not with new window. (I like to have many windows open at a time)
    When l click to open a new window either from a link or new window, it seems that nothing is happening. Then clicking to open another one which seems to open faster. Then all of a sudden the first window decides to open after about a minute or so. Sometime it seems to hang longer than other times.

    I did try the safe mode and didn't work. I did make iexplorer my default and then back again to foxfire and it somewhat worked. It was work not bad (but not as good as before) until I rebooted and it seemed the more I used it the better it became. Go figure :)
    Well I just did another firefox update to 4 and it works perfect and maybe even better than before. (or I got use to how slow it was :) )
    Thank You for you quick reply and I'm very happy for the new update... So far so good.

  • The first time I start Firefox it is very slow coming up but after it is up and I want another window it fast again. What do I need to do to clean out whatever is clogging it up.

    Question
    The first time I start Firefox it is very slow coming up but after it is up and I want another window it fast again. What do I need to do to clean out whatever is clogging it up. edit

    * The first time you start up any application after turning on your computer is called a cold start, which is why Firefox takes a while to load right away. (I've noticed that future versions of Firefox start up faster on a cold start then Firefox 5.0.1.) Also, a lower amount of RAM could be slowing its start-up down since Firefox is kind of memory hungry.
    * As for the second part of your question, press ctrl,Alt, and the delete keys on your keyboard. The Windows Task Manager should start. Go to the processes tab and look for 'firefox.exe'. Right click on the firefox.exe and click 'End Process'. Hit Yes and wait for a minute.
    * Then opening Firefox again.
    Hopefully this helped somewhat!

  • AW6 is very very slow at opening PICT Docs

    I have noticed that AppleWorks 6 is very very slow at opening Apple PICT Documents. The memory of AW6 jumps up tp over 1GB and it takes several minutes (if at all) to open these files. Which happen to open fine in OS 9.
    Any idea what has happened to cause these files to not open or be very very slow? The original file is only 22KB.
    I have noticed some of my drawing programs (Canvas x) fails to open these as well. However, Canvas 5 (OS 9) works fine.
    I have a G4 with OS 10.4.9 and 986MB.
    Thanks
    Don

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Have FF 3.1.6...less cumbersom. Lately it's been freezing up and is VERY slow to open. What's up with that?

    Have FireFox 3.1.6...less cumbersome. Lately it's been freezing up (can't close page without using Ctrl, Alt, Delete) and it is VERY slow to open. What's up with that?
    Have made no system changes. Have Avast for antivirus,. which updates itself regularly.
    Run Sys Defrag a few times a week. Don't know what else to do other than uninstall and reinstall.
    OS = XP Home

    MacAficionadodel90 wrote:
    ... Is there a way I can go back to 5.11?
    Sorry downgrading is not supported by Apple.
    MacAficionadodel90 wrote:
    ... Now my iPad starts up  slower...runs slower...
    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “... either from Backup or as New...
    http://support.apple.com/kb/HT1414
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

  • Satellite Pro U300 very slow at opening programmes

    Dear all,
    I bought a Satellite Pro U300 in Feb 2008 and I have only used it 3-4 times since then... It is very slow at opening programmes (I have only a statistical programme installed) and webpages , and creates problems when I try to download other programmes that have a different version than Windows Vista.
    I really have regretted buying this laptop and I am looking for someone to sell it.
    Before I do so, I was wondering whether I could uninstall Windows Vista and install Windows XP for example, or do something else that would make my laptop pleasant to use.
    Anna

    Hi
    The preinstalled OS could run slowly because many different applications are running in the background.
    My notebook was slow too until some background applications have been disabled.
    You can disable it in MSCONFIG.
    Type in RUN window msconfig and check the tab called startup.
    There you can find the software which could slow down the OS.
    Regarding the Win XP installation;
    Yes, you can also install Win XP. Using the Win XP the notebook should be little bit faster because Win XP doesnt need many hardware resources.
    Greets

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

  • Open and Save Dialogs Very Slow to Open and Populate

    In all of my apps, the Open and Save dialogs have become +very slow+ to open and populate since installing Snow Leapoard.
    This only happens on one of my machines, and not others. (I've unmounted all connected drives, just to eliminate that possibility.)
    Any thoughts on what this could be. The delay is significant (and feels like the old days of Windows, which I thought I'd left behind).

    The problem now appears to have gone away. The only change I've made is that I replaced an external drive that had recently died with a new one and gave it the same name as the failed drive.
    Could a the dead drive have left something behind (or failed to leave something behind) that is stumbled over (or looked for and not found) each time the file system was accessed, and that got cleaned up (or re-created) when the new drive was connected and renamed?

  • Since installing OS X 10.8.2 Safari is very slow to open sites

    Since installing OS X 10.8.2 Safari is very slow to open sites

    Do you get a notice that Safari has quit unexpectedly? If so, please do the following.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Photoshop CC very slow to open after Win 8.1 upgrade

    Hi guys. 
    I was wondering can you help me. I have tried extensive google searches with no real conclusive answer. I recently upgraded from Win 8 to 8.1. Since the upgrade Photoshop CC is very slow to open. It can take 1-2 minutes to boot up fully. Lightroom 5.2 & bridge open fine. I have a pretty fast system with i7 3.4Ghz Processor & 32Gb of Ram with the OS running on a 256Gb SSD Hard Drive. PS CC booted up fine on Win 8 but not anymore since the upgrade. The only plug-in I run is OnOne Photosuite 8. I have even tried disabling loading extenions at start up from the preferences menu but it makes no difference as it can stil take 1-2 minutes to open. Any help appreciated??

    There was a Photoshop update that corrected a problem Adobe had accidentally introduced with a link that went to a network resource that is not available for anyone outside Adobe.  But that was a while ago.  See:  Re: Photoshop CC startup slow (much harddisk access)
    I've had Win 8.1 all along and never had an update cause a slowdown.
    Unfortunately problems that go away on their own often return on their own.  I hope that's not the case for you and that it continues to work properly.
    -Noel

  • Safari was very slow in opening up Google sites.  I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section.  That seems to work well.  Are there any risks?

    Safari was very slow in opening up Google sites.  I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section.  That seems to work well.  Are there any risks to leaving the Configure IPv6 setting to Off?

    Nope. You can always reverse that if you choose.

  • I want to buy MBA 11'' which model is good.  i.e.  i need speed.  I am using Lenovo netbook s-10. Is very slow in opening web pages an also in operating other apps.

    I want to buy MBA 11'' which model is good.  i.e.  i need speed.  I am using Lenovo netbook s-10. Is very slow in opening web pages an also in operating other apps.

    Put your first emphasis on memory. Don't even consider 2 GB.
    Second, maximize your SSD size according to the ability of your wallet. Lastly is your processor.
    For what you describe the MBA is plenty fast.

Maybe you are looking for

  • 50mm Macro Life Size Adapter/Converter

    I own the 50mm f:2.5 macro lens.  This lens will focus to 1/2 life size but to get to life size Canon states that I need to buy their unique adapter which costs an arm and a leg.  What is the advantage of using the Canon adapter/converter instead of

  • Lsmw test flag

    Hi I have created partner profile as recommended in the sap documentation. So lsmw works correctly. But if i set test flag in the partner profile then in the Start IDoc Generation step error message is returned with text: Entry in inbound table not f

  • Urgent DSL Help Needed!

    I am sure this is probably not an Airport problem, but I didn't know where else to post. My Stuff - iMac G4 1.25 GHz, Airport Extreme Base/Card 10.4.5,Firefox, Thunderbird & iChat used extensively. - G3 MT 500MHz, 9.2.2 hardwired to Airport Base. - W

  • JCo RFC stop/hang

    Hi, I have a JCo RFC setup in my J2EE Administrator. Lately i found out the service will hang/stop by itself as my program unable to call it and when i test connection in SM59 (TCP/IP) it will say timeout. Once i restart the service then only it can

  • Servlet file uploading code need.

    Hello Can somebody give me a sourcecode of working servlet program that do file uploading on the server? thnks