Firefox 7 not working in Win7 Pro, also duplicating itself on task bar

Firefox 7 automatically installed itself on my Win7 Pro system on Sunday, 9/25. Since then it is taking a minute or more to access any website, or other pages within the same website. Frequently, it just hangs and I have to exit out and restart. Never had this problem with any previous version. Also, it is creating a duplicate of itself on my Win7 taskbar, all the way at then end, which makes it a pain to switch between browser windows.

Hi,
net config server /autodisconnect:number
where number is the number of minutes that you want the server to wait before it disconnects a mapped network drive. The maximum value for this command is 65535. Please attempt to reduce the minutes the server waits.
Also, the client-side session is automatically disconnected when the idling time lasts more than the duration that is set in KeepConn. So, please try shortening time in KeepConn.
Locate and then click the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service\lanmanworkstation\parameters
Value: KeepConn
Data type : REG_DWORD
Range : 1 to 65535 (sec)
Default value: 600 sec = 10 mins
Andy Altmann
TechNet Community Support

Similar Messages

Firefox not working in area kw1 5bj

firefox not working in kw1 area of scotland
== This happened ==
Every time Firefox opened
== 11-6-2110

Is there any solution you can suggest ?
The following are also not working.
http://bhashaindia.com/ilit/Bengali.aspx
http://bhashaindia.com/ilit/Gujarati.aspx
http://bhashaindia.com/ilit/Kannada.aspx
http://bhashaindia.com/ilit/Marathi.aspx
http://bhashaindia.com/ilit/Oriya.aspx
http://bhashaindia.com/ilit/Punjabi.aspx
http://bhashaindia.com/ilit/Tamil.aspx
http://bhashaindia.com/ilit/Telugu.aspx
Thank you for the support.

Adobe Reader XI does not run using Win7 Pro

Trying to run Adobe Reader XI on a PC running Win7 Pro, but it starts, gives gray screen, then shuts down. However, I can read pdf docs within Google Chrome.
I was running Reader version 10 with no problem, went to upgrade to 11, and now no versions work, as I've tried to uninstall and reinstall ver 9,10,11 but none work. Help!

I ran the script but does not fix issue.
When I run Adobe Reader or click on a .pdf file on my drive, the Adobe reader program starts, but gives a gray screen while my hard drive spins, then program closes.
any ideas?
Thanks,
Ken
Pat Willener <[email protected]> wrote:
=============
Pat Willener http://forums.adobe.com/people/pwillener created the discussion
"Re: Adobe Reader XI does not run using Win7 Pro"
To view the discussion, visit: http://forums.adobe.com/message/5211526#5211526

IMessage and FaceTime not working on Mac Pro and message stating to contact Support came on

iMessage and FaceTime not working on Mac Pro and a message stating to contact Support came on with a verification code. It was working on 8/29 but stopped on 8/30. When I called support to even speak with anyone they wanted $19. I don't want to pay $19 for an Apple problem. I cleared my key chain, also reset my apple ID password but still not working. Works fine on my iPhone.

There is no official public documentation of that error message as far as I know, but according to reports, it can mean (at least sometimes) that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a free service.
Otherwise, do what the error message tells you to do. According to reports, you won't be charged for the call if you select "Apple ID" as the product you need support for, and cite the customer code in the alert as the "validation code" to the support representative.

Youtube videos not working on macbook pro

youtube videos not working on macbook pro?

I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I updated my mac's OS to Yosemite and now my eye drop tool will NOT work inside premiere pro. Can anyone help me fix this issue?

The eyedropper tool for selecting colors to key out or to fill text will not work inside premiere pro, this error started when I updated my mac os to yosemite.

Hi Transportation,
Does the error occur in OS X 10.9? If not, why not remain at OS X 10.9? Is it necessary to run OS X 10.10?
The general rule of thumb is that when you are running software that is no longer tested or supported on a new operating system, you have to prepare for anomalies like this. You may want to install a separate bootable hard drive with OS X 10.9 on it so you can continue running that software more reliably.
Hope that helps,
Kevin

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.

Hello...
It seems I got it fixed!! I had been trying the Fixit tool from
http://support.microsoft.com/kb/306759 while typing up there :))))
This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
Hope it helps someone.

Quick time does not work on win7. What do I do?

quick time does not work on win7. What do I do?

Mine works fine with both my iPad and my iPod Touch. Been using it for two years. I recently replaced it with an Apple TV.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Why does Firefox not work here in China anymore, since January of 2015?

I have used Firefox for years, as the fastest and most reliable browser for me, esp in China... not anymore! Last month (unknown to me) a hijacker called Vosteran took over my Firefox browser. I finally realized it and got it cleaned up using Malwarebytes anti-malware, and downloaded a new Firefox... now SAME problem exists, even with Vosteran removed!
Firefox will not allow me into ANY normal sites, saying they don't have the proper security code. This includes my Yahoo front page, email account, ESPN and other common sites that are certainly NOT dangerous. So, WHY does Firefox not work anymore? It is useless to me here in China the way it works now.

hello rickinchina, first please make sure that the '''date, time & timezone''' are set correctly on your system and that firefox is set to directly connect to the internet (that's the "'''no proxy'''" setting in the firefox ''menu ≡ > options > advanced > network > connection - settings...'').
if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page (but don't do it for real) and inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
please report back with those two pieces of information. thank you!

7.1.2 update failed. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up.

Thunderbolt display not working on Macbook Pro - previously the display did work

Thunderbolt display not working on Macbook Pro - previously the display did work

I have upgraded ML but when the MBP tries to restart with the upgrade the MBP does not restart so I susapect the ML upgrade is not complete ? When you refer to 10.8.5 supplemental is this a separate upgrade ? When I connect the Thunderbolt to the MBP the Thunderbolt charges my MBP & I can play music from iTunes via the Thunderbolt. It is only the display that is not working on the Thunderbolt

Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

Ahmed
Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
Pattie

Firefox 7 not working in Win7 Pro, also duplicating itself on task bar

Similar Messages

Maybe you are looking for