Firefox and all beta versions have stopped updating

All vrsions of Firefox, including Aurora and the Nightly have stopped updating.

Hi,
Please also try deleting the '''updates.xml''' files and the '''updates''' folders in the [http://kb.mozillazine.org/Installation_directory installation directories.] Please note that updates usually occur between 24hrs or less, and if an update is missed a new full installation program may have to be downloaded.

Similar Messages

I am using Firefox 22.0 beta version.After the update everything is zoomed in.How do i revert this?

I have been using firefox beta versions mainly and before ver 22.0 pages displayed zoomed out as default with small text the resolution was that of my desktop at 1920X1080 it seems.After the update the text pages open zoomed in and dialog boxes bigger.Im very uncomfortable with this.Is there way to set all pages to open in a zoomed out format by default.

That is caused by code for HiDPI that landed.
You can modify the layout.css.devPixelsPerPx and increase or decrease the value in 0.1 or 0.05 steps to adjust the size of fonts and other elements in Firefox.
* The layout.css.devPixelsPerPx pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely (resolution 0.1 or 0.05).
* You can use values between 0.05 and 1.0 to reduce elements in size or use values greater than 1.0 to magnify and make elements larger (percentage divided by DPI, % / DPI).
If the web pages needs to be adjusted after changing this pref then you can look at Default FullZoom Level or NoSquint.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
See also this MozillaZine forum thread.
Does Fx 22 nightly look too large?:
*http://forums.mozillazine.org/viewtopic.php?f=23&t=2678897

MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
The latest supported version for your os is '''3.6.27''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
1. Download a 3.6.27 copy of the Firefox from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27)
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen.

Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

Thank you for your response.
After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

I have OS X I think. In any case I installed an updated firefox and my OS itself isn't updated enought to run it. So can I either somehow downgrade to the old firefox or at least somehow access and export my bookmarks?

I have OS X I think. In any case I installed an updated firefox and my OS itself isn't updated enought to run it. So can I either somehow downgrade to the old firefox or at least somehow access and export my bookmarks?

Swarnava, the OP is using a Mac, not Windows.
@Jubjub, based on your More system details... on right of your post you have a Intel Mac OS X 10.4.11
The last version that will work on your OS version is Firefox 3.6.* as the current 3.6.24 can be found at http://www.mozilla.org/en-US/firefox/all-older.html

I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? Help - thank you

I have a php module which runs fine in Firefox and all other browsers but not Safari. It always run twice - I see a small ? in upper right corner which is causing it to run twice but NO idea why? I read it MAY have something to do with am image it cannot load but I see them all loaded. Help - thank you

Could you share a link to the page?
Seeing it in context and in our browsers is much easier to debug.
If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

Help! I have downloaded Firefox 4 on my Mac which is running OS 10.4.11 and it will not open. It has displaced my previous Firefox 3 . How can I recover previous Firefox (and all my tabs)?

I have downloaded Firefox 4 on my Mac which is running OS 10.4.11 and it will not open. It has displaced my previous Firefox 3. How can I recover my previous Firefox (and all my tabs?)

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I have just updated to the new iOS 6, and all my contacts have disappeared? Is there a possible solution to get them back?

I've just updated to the new iOS 6 and all my contacts have dissappeared, is there a possible solution to bring them back, I really need them back. Thanks in advance.

You tried clicking on "phone" then "groups" and "Show All Contacts"

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
== This happened ==
Every time Firefox opened
== Since I downloaded Firefox

same here my AV is ESET, i already unblock it but no use can't connect to the internet..

All ZCM Policies Have Stopped Applying

Hey Guys,
We're having some serious problems over here.
Issue:
All ZCM policies have stopped applying.
This includes group policy settings, ZENworks Explorer Configuration Policies, and iPrint Printer Policies.
We've got a single primary server, 1300+ devices, and are currently using the built-in sybase database.
The first thing on our plate is to address the database. We're migrating to Oracle very soon, since we have out-grown the 1000-device limit of the built-in database, however do you feel that the limitations of the built-in database could be causing the policy issues? This all started perhaps a few weeks ago, and before that point everything was just fine.
Server OS:
SLES 11, 64-bit
ZCM Version 10.3.0.0
Clients are Windows 7 32-bit and 64-bit
pitcherj

Shaun,
I've not changed the way they're associated.
The iPrint policies are (and have been) associated to folders full of workstations.
The group policy setting(s) are (and have been) associated at the root of "Workstations" since it's a campus-wide policy.
Prior to our email discussion, I did create a test policy which was pointed at a different iPrint server with no success.
I also cycled enable/disable enforcement of the policy, incremented the version several times, performed a zac cc and a zac ref on the client, as well as attempted to associate the policy to a user which I logged into the workstation with no success.

RSS Feeds have stopped updating

Recently my RSS feeds have stopped updating.
Maybe post 10.4.5 Combo update (have run twice)
Once feeds have been read they do not update. Tried deleting safari prefs, syndication folder.
This cures for the first initial update then all feed stop again.
Anyone have any ideas ???
Cheers
-s

Simon,
There is a lot of information on this problem in this thread: http://discussions.apple.com/thread.jspa?messageID=1498326&#1498326
It has been around since 10.4.4. For many of us (me included) the problem seems to be having .Mac bookmark synching turned on. If you have bookmark synching turned on, try turning it off and seeing what happens. Also, some people are reporting that changing the sync frequency from "automatic" to "every hour" (or presumably the other settings would work, too) corrects the problem as of 10.4.5. It would be nice, of course, if Apple would just correct the problem altogether.
Mark

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

I just downloaded Yosemite and all my iPhotos have disappeared! I tried importing them from the photo library but it said there wasn't enough space on my hard drive which is rubbish, because they were there before. How do I get them back to iPhoto?

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Firefox and all beta versions have stopped updating

Similar Messages

Maybe you are looking for