Firefox and Safari won't open

I updated my mac a couple days ago and now nothing works.  Safari and Firefox the wheel just spins.  Chrome shows me the page then freezes and saids unresponsive.  Mail works.  Can not open system preferences.  Have rebooted 5 or 6 times.    Was wondering if I should try and download mountain lion,  but not sure I could.

Upgrading to a newer OS X in most instances won't fix a browser issue, combined with the fact you can't open System Preferences, that's an indication that the startup disk needs repairng.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click:  Verify Disk  (not Verify Disk Permissions)
If DU reports errors, start up from your Mac install disc to make repairs.
Instructions here >  Mac OS X 10.6: Reinstalling Mac OS X
If the startup disk appears to be ok, restore OS X from the instructions at that link.
Backup all important data before restoring OS X.

Similar Messages

  • I installed Firefox and it won't open any web pages at all, why?

    No matter what web address I type in nothing comes up. Even have tried clickig on the 'Getting Started' button and it won't open either.

    Hi robertoberlin,
    Could you give me some extra information and I'll try to help.
    * Does safari work/load pages?
    * What error do you get?
    * What kind of connection are you on? Wifi? At home? At a school / university?

  • New MacBook Air backed up from my Time Capsule.  Now Mail and Safari won't open, I just bought a new MacBook Air and backed up from my Time Capsule.  Now Mail and Safari won't open

    I just bought a new MacBook Air after my old one suffered a drink being spilled on it and died.  I used migration assistant to back up from my time capsule but now it won't open Mail or Safari and iTunes can't find all my music.  Any ideas how to fix this? I have downloaded software updates.

    Thanks for that advice however now I have a duplicate of all my documents on my hard drive but the Mail and Safari will not open.  I have been able to open iTunes. I have tried to download software updates for Mail and Safari and this tells me that the download was unsuccessful ( after taking some time to download).  Can I reinstall the system?  Would that help?

  • Upgraded to Lion and Safari won't open.  I have completed all available software upgrades, reset the macbook several times, no luck.  Any suggestions?

    I'm using a 2008 macbook 10.7.4 operating system.
    I had purchased lion a while ago but had to wait for a fast internet connection to download and install.
    I did that today and now safari won't open.
    I have reported the issue as it does automatically.
    But obviously I would love to have a solution to the problem.
    I do have time machine and completed a back-up just before upgrading to Lion - so if I have to I can reverse back to snow leopard, but that's a last resort.
    Any solutions or work-arounds for this?  I can't seem to find any other solutions from the blogs.

    Before anything else...try...
    Quit Safari.
    Go to ~/Library/Preferences
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
    Relaunch Safari. If that helped, move the.plist file to the Trash. If not, move it back to the Preferences folder.
    ~ (Tilde) character represents the Home folder

  • Mail (and Safari) won't open after Security Update 2007-004

    I have a PowerBook G4 running 10.3.9. The machine was running fine (I was checking mail, browsing the web) when my weekly scheduled update opened. Per it's suggestion, I installed Security Update 2007-004.
    Upon restart, both Mail and Safari will NOT open. The icon for each on the dock simply "bounces" once when clicked then nothing else. Has anyone else experienced anything similar? Any thoughts on a fix?

    Installing a system update while you continue using the computer as if nothing was going on there is a really bad idea.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all the filesystem issues, if any, reinstall the Security Update, which may not have been installed properly. It may also be necessary to reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
    Mac OS X 10.3.9 Combo Update
    Take a look at the following articles for guidelines on how to properly install system updates:
    Troubleshooting installation and software updates
    Installing software updates
    Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

  • Itunes and safari won't open

    My itunes stopped working after I came back from vacation. I tried uninstalling everything and updating to 10.1 but it won't open. When I click it, it shows up in the task manager for a moment and then disappears with no error messages. Quicktime works fine but when I downloaded and installed safari it won't open either.
    Then I created another user account and tried it there and it doesn't work. It also looks like the plugin for adobe acrobat has stopped working as well. I have to right click and save as to view pdfs. I tried disabling the bonjour service and restarting the computer but it still doesn't work.
    Any ideas? I have windows 7 x64 professional
    Thanks

    Still having the same problem I'm getting a distnoted.exe *32 that pops up in the taskmanager for a short time after trying to open it. I did get this after creating another user account: Itunes has stopped working
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.0.1.22
    Application Timestamp: 4c9c64ce
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 00000000
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Message was edited by: baileyde

  • Firefox and Utilities Won't Open

    Suddenly, Firefox stopped opening. When I try opening Utilities like Activity Monitor to see what's up and Disk Utility to repair permissions, they refused to open too. Other programs - Word, Safari, etc., open no problem. I also noticed that my GPU, which had been running @ 77 centigrade, was up to 85. Other temps:
    CPU Core 1: 67
    CPU core 2: 67
    IStat shows User CPU at 100%, with Safari, my only open app, at 100.5. When I had Word open, it was at the same time also showing 97%. My computer thinks it's a high school football coach: "You gotta give two hundred percent!"
    I ran rebuild on Disk Warrior from the CD, which found one error, but it made no difference.
    Things I've changed recently are:
    4 days ago, old 22" Cinema Display went dead. I was running two, and the other was on its way out, so I replaced with a pair of 23" Samsungs. No problems with that initially, but when I see higher temps with the GPU, I wonder if there's a connection.
    This afternoon, I tried installing SafariStand, which first required installing SIMBL. When I started having problems, I backtracked and deleted SIMBL from the input managers, but it hasn't helped.
    Final difference is that Firefox installed an automatic update. With the Firefox problem, I tried trashing the plist - no help - then the app itself and downloaded a fresh copy - also no help.
    I've got my system and apps on one hard drive and my data on the other.
    Thanks for any thoughts.

    Try each step in order, checking as to whether the issue is fixed before moving on.
    1. Safe boot (hold shift at the chime until the spinning gear) and run your preferred housekeeping utility; Onyx, Cocktail or whatever.
    2. Delete plist files for affected apps.
    3. Reset PRAM. Hold Cmd-Alt-P-R at the chime until it chimes again. Keep holding it down for a total of 4 chimes.
    4. Reset NVRAM. Hold down Cmd-Alt-O-F at the chime until you get an open firmware prompt. Type:
    reset-nvram
    set-defaults
    reset-all
    It will reboot.

  • I just downloaded Firefox and it won't open, message "The procedure entry point ?js_NextActiveContent@@YAPAUJSContext@@PAUJSRuntime@@PAU1@@Z could not be located in the dynamic library js3250.dll. What is the problem?

    I was trying to update Firefox but could not. I went ahead and downloaded the latest version but it won't open. I tried deleting, and then reinstalling, same problem. I am running AVAST antivirus

    See:
    * http://kb.mozillazine.org/Browser_will_not_start_up#Procedure_entry_point_js_SaveRegExpStatics__error_in_js3250.dll_after_updating_Firefox

  • Upgrade failed, it corrupt my Firefox and now won't open at all???

    I just received a notice this a.m. to upgrade Firefox. I accept it and followed the defaults. Now, FF won't open at all.

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Uninstall your current Firefox version if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I downloaded firefox and it won't open

    Ookay I downloaded Firefox. The icon appears on my desk top. However, when i click on the icon it won't open.

    Try this?
    * https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start

  • Firefox and Minefield won't open articles in the Washington Post. Any suggestions?

    It opens the front page of the site, but not all articles.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I keep getting an alert when I launch Firefox and it won't open websites. Alert below

    Get this alert when I try to open new version Firefox I just downloaded. I trashed the old version and re-downloaded and installed new version. Alert meaage: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.

    See:
    *https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

  • Just installed new updates and Safari won't open due to TelevisionFanaticPlugin

    I just insalled all my new updates for my MacBook. Every time I open the Safari brower, it automatically closes.  The error message says it crashed and it is due to the TelevisionFanatic Plug in. What can I do to fix this?

    If it's not in the Internet Plug-Ins folder check the following.
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.
    The tilde (~) represents your Home folder.
    Another user found the same plugin in /Library/ScriptingAdditions >  https://discussions.apple.com/thread/3221294?start=0&tstart=0

  • Recently installed a new hard drive and safari won't open?

    How do I get safari to open afeter hard drive has been installed?

    What happens when you try to open it?

  • Mail and Safari stopped working/opening at all

    Hello,
    Mail and Safari won't open. The little black arrow appears under them in the dock, but nothing... The little pop-up menu that appears when I click and hold on the icons in the dock says "Application not responding" and offers me the option to force quit. I have checked my users folder and apparently the mailboxes are there, but I cannot open the program. I have always had several mailboxes and kept messages separate and under categories to avoid too many messages in one mailbox.
    I tried to repair permissions and I even safe-booted, but no help at all. I noticed in another posting...
    http://discussions.apple.com/thread.jspa?messageID=5884802#5884802
    that someone else is having a similar problem. Could it have been from a security update which I did recently?
    Please help!!!
    Thank you in advance
    Rob

    Hi Rob
    You could try reinstalling the update again, this time with all applications closed and not using your computer at all while the installation proceeds, especially during the optimization phase part of the process.
    If you chose 'Install and keep package' from the Software Update you will find it in
    HD/Library/Packages
    If you did not keep the package you will need to download it again.
    As you are not on the net, (unless you have Firefox which works) download the package, move it to HD/Library/Packages and double click on it to reinstall it.
    Security Update 2007-008 (10.3.9 Client)
    With a bit of luck doing this might rectify your network connections.
    regards roam

Maybe you are looking for

  • Weblogic 12c console doesn't update with datasources defined

    Hi Guys, I've observed this behaviour.. which seems to me as a bug somewhere.. Here is what happens.. 1. I define a datasource 2. Then I try to create JDBCStore for JMS messages.. I don't see my defined datasource in step-1 in the dropdown list.. 3.

  • How do I update a view with a join

    I have a module with database block based on a view with joins, so I am not able to perform insert, update & delete directly. Therefore I created an unbound item that can be changed. The relevant database record is searched and updated. So, with abov

  • Material Ledger not activated in both plants within the same company

    Hi Experts, I would like to ask what would be the impact if we activate ML only in one plant. The company code has 2 plants assigned to it. We are currently implementing transfer pricing but only to one plant. What is the impact of activating the PC

  • Can u rectify my mistakes ??

    well, i am very new to java programming, and have been into it for no more than 15 days ... i have a assignment, which i have worked as below. can anyone point my mistakes (how silly they might be) and if possible, tell me what is to be done to achie

  • In the disk utility my S.A.M.A.R.T is written in red

    in the disk utility my S.A.M.A.R.T is written in red