Firefox Aurora 6.0a2 not updating after June 10, 2011 - Windows 7 64-bit
Firefox Aurora 6.0a2 installed on my Windows 7 Ultimate 64-bit desktop last updated on June 10, 2011. When I click Help-About Aurora, it will say Aurora is up-to-date even though there are updates on June 11 and 12. My other Aurora installation on a XP SP3 PC is working fine and already updated for June 12, 2011.
I had both Aurora and Nightly stop getting updates as of 06-09 (no problem with Minefield) and both show they are up-to-date. I've seen that happen from time to time when using "nightly tester" versions.
Download the full version and replace your existing installation.
Similar Messages
-
Firefox 15 UI does not update after wake from sleep
On my Netbook running Windows XP 32-bit, if I leave Firefox open when I put the computer to sleep (by closing its lid), then when I wake it up from sleep, the user interface elements (like the tab bar) won't respond to mouse clicks. This does not happen 100% of the time; in particular it won't happen for a freshly restarted Firefox that is put to sleep, making the problem rather annoying to reproduce. As far as I can tell, I might have to visit some set of websites with Javascript or Flash or something.
Here are some more details about the user interface, because it is not as simple as non-responsiveness. When I wake it up, when I click on a tab to switch to it, the Windows title bar actually changes to display that tab's page title, but nothing else in the UI updates including the URL bar and the actual page displayed. Similarly for closing a tab; the tab remains, but the title bar shows the title of the tab that would receive focus next. After I "pseudo" close a tab and then restart Firefox, it does not remember that I closed the tab (I save sessions) and restarts with the same set of tabs before I tried to close one.
I get the problem even after disabling all extensions and resetting all toolbars to defaults. I have not tried to create a new profile because I have a lot invested in my current profile.I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it. -
Web Pages do not display after new installation on Windows 2008 64 bit
Hi All...
Environment: Window 2008 64 bit.
Installing: Latest WebTools compatible with 64 bit.
Installed: 2.0 asp.net
After installing webtools in this environment we attempt to register/request the license.
After clicking on the request - windows prompts you to open.
If you attempt to open, you are asked which program to open with...?
That seems odd.
At this point this is all I have and am stuck as the system is inaccessible.
Rob.Bryce...
This did help.
Also - I discovered that the webserver was not previously connected to the domain and was not inheriting permissions.
Steps Taken:
Uninstalled the IIS and ASP Roles from the web server as local server administrator.
Joined web server to domain.
Added the IIS and ASP Role.
Re-installed webtools.
Registration launched - no exceptions.
Gracias.
Rob -
Firefox says i am not updated after updating twice. why?
nothing to add
i suggest you to update firefox from scratched,
Download firefox from firefox.com
remove firefox completely from control panel
install firefox from fresh installer
check if problem is still persist or not -
PO item change is not updated after Delivery completion
Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
SujithHi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith -
Recent files list is not updating after 10.1.13
Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer. If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update. The recent files list updates only if I open the file from the same drive listed under Network.
Hi Bert ,
You might want to report for a possible bug.Please refer to the following link for the same.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards
Sukrit Dhingra -
Picked Quantity is not updated After delivery in Vl03n
After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
Is it any configurations needed or writng any code.
For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
But it is not stopping the Program.
Please give any possible solution.Hi Vinod,
Thank u For ur Answer.
Just my Fuctional Consultant given Procedure.
How to test the picking list. The problem is after Deliver the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
Output Type: EK00, Application: V4.
Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type. We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
Now the picked quantity is not updated after picking in VL03n. -
Node.length not updating after removeInstance
I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
For example, the form starts with 1 line item. (node.length = 2, index = 0)
I can successfully add a new line item (node.length = 3, index = 1)
I then can add another line item (node.length = 4, index = 2)
I can successfully delete the last line item (index = 2) using the following code:
var nodelength = form1.items.nodes.length;
//need to know which instance is being removed
if(nodelength>2){
items.item.instanceManager.removeInstance(nodelength-2);
else if(nodelength==2){
form1.items.items.Status.rawValue = "";
form1.items.items.guestName.rawValue = "";
form1.items.items.Payment.rawValue = "";
form1.items.items.Entree.rawValue = "";
At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
Chris
Adobe Enterprise Developer Support -
Thumbnails not updating after external editing.
I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
I did try restarting Aperture before the doing the "option - update preview" and that had no effect.Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
I am using 3.0.1 now and that is where I am seeing the issue. -
Ipad mini apps not updating after ios8.2 update
apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN
Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one). -
Database history growth not updating after EHP upgrade
Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MKHi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav -
Revision: 5489
Author: [email protected]
Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
Log Message:
i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
QE Notes: None
Doc Notes: None
Bugs: SDK-20148
Reviewer: Deepa
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20148
http://bugs.adobe.com/jira/browse/SDK-20148
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.asFYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989
-
Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnksAll I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}" -
Infostructure S502 not updated after certain date
There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23? -
Average Active Sessions graph not updated after restart
Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
ThanksThis is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric
Maybe you are looking for
-
My iPhone 3gs is not detected as a camera in FaceTime/photo booth
need help My iPhone 3gs is not detected as a camera in FaceTime/photobooth, I sync it everyday and also able to import pics, but can't use it for chat ;-( i went to store to ask this and guy told me to change preferences i came back home and cant eve
-
Hi, I have a shuttle. I am using its value in a query by using sql collection array. My requirement is that I need to hide that shuttle. But when I hide the shuttle, its value is not retrived by the query. Please give some idea how to get this functi
-
Hi We have set PWB preferences View Recommendations for (Days from Today) as 10days, But in supply/demand the datas are showing outside this time limit.For example if I saw today (04-Nov-days),only 10days from today suggested order dates order should
-
Delete a Row from a Nested Data Table
Hi... Good day... I have a dataTable nested within another DataTable. I want to delete a Row from the nested DataTable on clicking a remove Button at the Last column of the Nested DataTable, Jus in the browser. How to accomplish this using JavaScript
-
Airport Express signal fine but no internet connection
We have been using an Airport Express for wireless Internet access and recently are unable to connect to the Internet. We use a Comcast cable modem, through a Linksys router, to the Airport Express. We can connect by network cable to the router and a