Firefox auto starts after start-up

Everytime I re-boot Firefox opens on my home page.....Checked for virus...Non found....Firefox not in "start-up" folder.....

Hi Lefky, if you have the patience for an experiment, could you try this? The idea is to save a copy of your Firefox settings folder so that you can compare the pre-shutdown folder contents with the post-startup folder contents.
To do the comparison, I suggest a program like Winmerge: http://winmerge.org/
Before shutting down Firefox for the day, open your currently active Firefox settings folder (your profile folder) using:
Help > Troubleshooting Information > ''(in the first table)'' "Show Folder" button
Leave this folder open, then switch back to Firefox and Exit
Pause 10 seconds while Firefox finishes its cleanup, then in the address bar above the file list, click Profiles. There you should see your active profile folder, although you might also see others.
Right-click > Copy your profile folder and paste it somewhere far away, like your Documents or Downloads folder, or an external drive.
You might want to copy the paths of the two folders and paste them into a Notepad or Word document for future pasting, as that will speed the process of running the folder comparison.
After restarting Windows,* you can use Winmerge to compare the contents of the two folders to see what might be changing when Windows starts up.
Anything interesting happening?
''* Before starting Firefox''

Similar Messages

  • Bing is taking over Firefox - auto starts on start, or grabs the home page if I start it - how do I stop this? Go to Safari?

    Every few months, Bing takes control of Firefox:
    When I start the computer, Bing autostarts FF and then makes itself the home page.
    If I quickly close FF - I am really upset about this Bing thing and will never use it, so I shut down the autostart FF - and then open FF myself, Bing will open as the home page.
    When I check options Gmail is set as the home page. When I check bookmarks, there is nothing for Bing.
    This is a pretty egregious MS malware program.
    How do I stop this, and keep it from re-occurring? Note that I've already tried the resetting of FF, which means I must reinstall all extensions. That works but only for a few weeks. The Bing malware is back. How do I get rid of this, once and for all? Or could Mozilla have a legal chat with MS, since they are "grabbing" your software in the worst malware fashion.
    I use an ASUS F502c. It came with Windows 8; I've upgraded that to 8.1
    Thanks,
    DMS

    Hello,
    You can check for malware and/ or reset Firefox to solve this issue:
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Embedded SWF files auto starting in IE but set to not auto play - Chrome, Firefox, Safari work ok

    One of the web masters at my school has embedded several Captivate 5 swf files in a web page.  I had re-exported all of them to not auto start after we realized that the originals were set to auto play upon loading (someone else made the orginials...).  Caches have been cleared on IE9, but yet, when that page loads, all of the no auto-play swfs start playing.  On Chrome, Firefox and Safari, none of them start playing when the page is loaded.  Does anyone have a clue why IE9 might be doing this and how to fix it?
    Thanks,
    Sue

    Am I correct in assuming that when your web developer set these SWFs up on the same page that he did not use the default HTM page that Captivate creates?  Did he just embed them into the web page using standard Dreamweaver code for SWFs?
    Do the same Captivate SWFs start automatically if you upload them to your web server individually with the HTM and JS files that Captivate creates?  If not, then your web developer might be better off embedding the content in his web page using individual iframes pointing at the HTM file rather than the method he previously chose.

  • After an automatic update, Firefox will start but immediately terminate. How can I fix this problem? I am sick and tired of manually un-installing Firefox!!

    Since Firefox version 12, after Firefox automatically applies an update, Firefox will launch and immediately terminate.
    The only solution is to manually un-install Firefox, completely clean the registry of Firefox entries, and manually re-install a previous version of Fiirefox that will work -- I use version 4.0. And then manually update that version to the current version.
    I DO NOT install the new automatic update option -- that is, the automatic maintenance option.
    BUT never the less, EVERY TIME I check for the latest version of Firefox using HELP --> About
    Firefox, the UPDATE is AUTOMATICALLY RUN and FIREFOX WILL NOT WORK AGAIN.
    I have put with this none sense for 18 versions of Firefox - MAKE IT STOP!!!!!!!
    Thanks, David Breed

    You can use one of these to start Firefox in <u>[[Safe Mode|Safe Mode]]</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    Can you bring up the Profile Manager to create a new profile (possibly when starting in Safe Mode by holding down Shift)?
    Create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How to stop the auto-start of log reader agent (replication) right after my database is restored?

    I have the scenario where the SQL server is restored (after migration).
    This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
    Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
    Thanks in advance - Jebah

    Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
    any other way to disable the jobs?
    Steps I followed
    Started with a Working publication and subscription
    Disabled the jobs (log reader and distribution agents)
    Backed up publisher, subscriber, distribution and msdb
    Deleted the publication, subscription, publisher and subscriber
    Restored the publisher, subscriber, distribution and msdb
    Enabled the jobs and executed sp_replrestart
    Observations/Issues
    Replication does not work
    Replication monitor does not show any error
    Jobs are shows as enabled but not started in job monitor
    Not able to start/stop the log reader and synchronization manually.
    I am not sure if I have missed something while restoring the db.
    Thanks in advance

  • Is there any app for phone auto start after swithced off??

    Is there any app for phone auto start after swithced off??

    Are you looking for an app which will startup the Z10 at a specified time?
    I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

    I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

    -> [[Firefox is already running but is not responding]]
    -> Profile in use
    * http://kb.mozillazine.org/Profile_in_use
    Check and tell if its working.

  • Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5

    Every time I click on Firefox a box pops up asking me if I will allow changes to my computer from firefox This started happening after I installed firefox 5 e

    Check that you do not run Firefox as Administrator.<br />
    Right-click the Firefox desktop shortcut and choose "Properties".<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />
    * Privilege Level: "Run this program as Administrator" should not be selected<br />
    * "Run this program in compatibility mode for:" should not be selected<br />
    Also check the Properties of the firefox.exe program in the Firefox program directory.<br />

  • Why does window media player auto starts in firefox browser

    why does window media play auto starts in firefox browser
    == This happened ==
    Every time Firefox opened
    == I put a code in for a radio station on the net i listen to on my site

    Your More system details list show the WMP plugin (np-mswmp), so that should be working.
    See:
    * http://kb.mozillazine.org/Testing_plugins
    * http://www.vdat.com/techsupport/windowstest.asp

  • Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • How to remove auto start of firefox plug in page

    1) how to remove auto start of firefox plug in page. we do not want this site to open when openning firefox.
    2) we proceeded with a few updates as requested, but firefox did not show the update once complete-still said need to update.

    First of all your Flash plugin is out of date: Use Adobe's own page to test your version of the plug-in and to update it www.adobe.com/software/flash/about/ -- evidently the same information is not getting to the Mozilla plug-ins test. That might fix your problem if your home page uses Flash such as a news site.
    Find updates for installed plugins at www.mozilla.com/plugincheck/mozilla.com/plugincheck
    plugin page keeps coming up: see https://support.mozilla.com/en-US/questions/832793 particularly the replies near the end (different replies for different users).

  • Auto-start OC4J process after Linux reboot

    Oracle 11gR2, OC4J 10g (10.1.3.5.0), RHEL5 64 bit
    Hi All,
    I am trying to figure out how to get my oc4j process start at boot time. I already have a dbora script setup. I tried adding the following line to my dbora/dbstart script but it did not do anything:
    #!/bin/sh
    # chkconfig: 345 99 10
    description: Oracle auto start-stop script.
    ORACLE_OC4J_HOME=/u02/oc4j
    JAVA_HOME=/usr/java/jdk1.6.0_21/
    su - $ORACLE_OWNER -c "$ORACLE_OC4J_HOME/bin/oc4j -start"
    I read somewhere that I may need to put the entire path like:
    /usr/bin/java -jar /path/to/oc4j.jar &
    Just not sure where and how to put that path in the file.
    Thanks for your help all.
    JrOraDBA

    Hi,
    To run oc4j in the background, on Linux
    Execute the following command:
    nohup ./oc4j -start &
    to run oc4j in the background. The 'nohup' command ignores the hangup signal (closing the terminal window) and enables oc4j to continue running in the background.
    In rare cases, oc4j will not shutdown cleanly with the standard command:
    ./oc4j -shutdown -port 23791 -oc4jadmin <admin_pwd>
    In those cases, try the following command:
    java -jar admin_client.jar deployer:oc4j:localhost oc4jadmin <admin_pwd> -shutdown
    to stop the oc4j service.
    Thanks,
    Sharmela

  • Can't get Firefox to start after performing OS security updates

    Just did the most recent updates on OS-X 10.6.8, and now I can't get Firefox to start. It comes up and says that it is having problems (the "embarassing" window) and that I should try closing tabs. However, it's not responding at all, so finally I have to resort to force quit. I've try cold starting the computer with no effect.

    Let's try this. You said you are trying to start Firefox 8 on the problem machine? Can you try downloading Firefox 11 from [http://www.getfirefox.com www.getfirefox.com], install that, restart your computer, then see if it still acts up?
    If it does, try running Firefox in [[Safe mode|Safe mode]].

  • After mozbackup restores "certificates" firefox cannot start, other items restore OK

    I use Mozbackup to synchronise Firefox from my desktop to my laptop. My laptop's Firefox would not start and displayed a crash reporting dialog.
    I completely uninstalled and made a fresh, new install with Beta 19.0.2. I then restored my Mozbackup from my desktop, item by item. When the "Certificates" item was restored, Firefox would not start and display the crash repoting dialog. So now I know that the certificates item is the culprit.
    Why does this allow Firefox to start on my desktop but refuses to do so on my laptop?
    Thanks a lot! [email protected]

    I used the Mozbackup file from my desktop, which does not seem to have this probem, to restore all my Firefox settings. I restored the settings category by category until I found the culprit by process of elimination. The "Certificates" item from the backup is the one that prevented Firefox from starting. My question is, why this happens?

  • Why will Firefox not start on my windows laptop but it says it is open in background

    since last update, firefox will not start even after repeated attempts. It is apparently open as i cannot delete it from the laptop untill I restart laptop.
    I am running Windows 7 and i run Thunderbird successfully on my machine. I am forced to use IE to get onto the internet.

    Does Firefox not start in Safe Mode?
    * Click the Windows logo orb on the taskbar to bring up the Start Menu.
    * In the search box, type firefox.exe -safe-mode and press Enter.
    * If the little Firefox Safe Mode window pops up, click the Start in Safe Mode button.
    * For more details, see [[Troubleshoot Firefox issues using Safe Mode]]
    If Firefox doesn't start in Safe Mode, does the profile manager start? If yes, create a new profile and try starting Firefox in that profile.
    [[Use the Profile Manager to create and remove Firefox profiles]]

Maybe you are looking for

  • APPCRASH   iTunes.exe 12.0.1.26 Windows STOP

    Hi When I run Itunes, the application stops running, I cannot even navigate on the app, this is the version 64-bits ... my PC does not work with 32-bits version Problem Event Name: APPCRASH   Application Name: iTunes.exe   Application Version: 12.0.1

  • Semiweekly Time Series Creation for DP

    Hi, I want to create a semiweekly (twice a week) time series for DP. And this would be spread for 2 years (i.e. 1 year for the past and 1 year for the future). So a total of 208 entries need to be made for this time series. My understanding of the me

  • Report in MM-FI???

    Hi experts Can anybody tel me some idea , how to  go about this .. In FBL3N, in the assignment field the PO Number is captured, similarly we want the PO Number to be captured in MIR5 Thanks SAP-MM

  • Error #572 when connecting to smtp mail server

    Hello everybody! I think there are a lot of possible problems may appear when using the UTL_SMTP package in different ways. Could anybody tell me whether the error message "ORA-29279: 572 a domain name must be specified" has ever been seen and correc

  • Why servlet is use a contoller in mvc pattern

    hi in j2ee technology we have use servlet as a controller. if i have use jsp as a controller what happen