Firefox automatically sends some data to mozilla so that we can improve your experience.
i tried asking this in a similar topic and got no response and marked as answered so ill ask it again. i already had 'Enable Telemetry' and 'Enable Crash Reporter' disabled but i still got the popup. i'm not sure why firefox is saying it's automatically sending mozilla data when both options are disabled.
it used to say
will you help improve mozilla firefox by sending information about performance, hardware, usage and customizations to mozilla?
but that was changed to
firefox automatically sends some data to mozilla so that we can improve your experience.
this makes me think firefox is still sending data regardless. so as long as both of those options are disabled firefox is not sending ANY info about me? if that's the case mozilla really needs to update the message. privacy policies are usually so vague and shadily written by lawyers that they are just about useless.
Firefox 20 has a new message to prompt you to check your settings. This is in preparation for a future feature called health reporting, but currently the only categories are the same old ones: telemetry and crash data.
Similar Messages
-
Nike+ Sensor & Can't automatically send Workout Data
Hi,
On my old ipod touch I had it set up to automatically go to Nike and update my workouts. Now I'm using a new ipod touch and iTunes Help tells me to :
a) complete a workout -- check
b) connect my ipod to my computer -- check
c) when device appears in iTunes select it and click Nike + iPode button -- check
d) Select "Automatically send workout data to Nike+." -- NOT A CHOICE I CAN MAKE -- I CAN'T FIND THIS CHOICE !!
Has anyone else had this trouble and what's the solution?
I am using the latest software on both the computer & iPod and their is an unsynched workout on my ipod touch.
Any help would be great.
Thanks in advance.Hmmm, sounds weird. If someone else has experienced this maybe they will jump in here, but if not, you can always call Nike+. Surprisingly they answer their phone quite quickly.
Anyway, here's my shot at it:
I will assume you have downloaded the Nano updater ( http://www.apple.com/ipod/download/ ).
I would eject and disconnect the Nano (perhaps restarting my computer) and close iTunes, then reopen iTunes, reconnect and see if the box is available.
Also check this page: http://www.apple.com/support/nikeplus/ also this page http://docs.info.apple.com/article.html?artnum=303933#faq9 -
I am trying to backup some .m4a files from my MacBook Pro to an external hard drive and suddenly tonight I am getting "The Finder can’t complete the operation because some data in “1-04 Time.m4a” can’t be read or written. (Error code -36)". I have searched for fixes but none of them are working. I have backed up this folder many times before with no issues. Any help is greatly appreciated.
By the way, I have repaired disk permissions on main drive and repaired both the internal hard drive of my MacBook and the external drive. No luck.
-
Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.
Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. I have tried all the steps in the Firefox crashes article and I can't figure out what is wrong. How can I fix this?
please install latest version of Roboform 7.6.2 and try
* www.roboform.com/support/news -
I am using iphone 4 Geveya in which I have to dial 112 after re-insertion of Sim Card. When i connect my phn to I tunes I got message to update the version of iphone. Some one has informed me that I can not update this phn will stop workin after update.
Kindly update me on this whether I need to update this or not.Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Where can I send an email to iTunes so that they can resend me my purchased items? I just got a new laptop (switched from a PC to a Mac) help would be appreciated.
Email itunes support! Or you could just transfer your purchases. Either w/ external drive, or w/ you iphone/ipod/ipad!
-
RS-485: PC can send/receive data from PCI card, but LabVIEW can only send to card.
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
TimTim359 ha scritto:
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim
RS232 interface consist of 2 indipendent communication crossed lines between 2 devices (9DSub connector: Pin 2-RX Pin 3-TX pin 5-Gnd)
RS485 interfaceis a bus, shared between 2 or more devices. (like ethernet or CAN Bus)
This means that an incorrect use of the bus can lead to a "packet collision" if 2 or more devices try to send a message on the bus at the same time or at least their messages, partially "overlap"
About 10 years ago I have used a PCI 2 RS485 port: I remember that I have to change the status of RTS serial control line to switch between transmit and receive mode.
This can be done using the serial VISA property:
Serial Settings --> Modem Line Settings --> DTR State
or using the VI
<LabVIEW dir>\vi.lib\Instr\_sersup.llb\serial line ctrl.vi (LV 8.6.1)
The result was that the slave device connected, send me the response after few nanosec. causing the lost of the answer.
because LabVIEW use more than some nanosec. to change RTS property after sending message on the 485 bus calling a VISA Write.
So for me there was 2 possibilities:
- use 2 RS485 port (1 for transmit 1 for receive echo transmit included)
- use this converter
http://www.advantech.com/products/ADAM-4521/mod_2E78D425-8B08-43F6-81B0-1B924E53E075.aspx
this converter, after sending a message on the bus, electronically switchs back to receive mode without losing a byte.
But the question is :
what does it means
"RS-485 mode supports Auto Transceiver turn around (ATTA)"
of your card?
bye -
Question: I tried to backup my computer contents, cut coun't because "finder can't compelte the operation because some data in ........JPG (an iphoto image)
can't be read or written (error code -36) What is this error and how can I correct it?
Thanks,
betteypI am backing up on two different drives...one is on the time machine...the one I am having trouble with is a passport that I back up manually. I have not gotten a notice from the backup on the time machine that there is an error.
Before this error occured....the "event" that the photo was in emptied without me doing anything. This has happened before, when the total number of pictures that I have downloaded for the day, the events emptied overnight without me doing anything (????????)
Can you explain more what is happening.....
Thanks -
University tech support says their online course system prefers explorer to firefox, and something they and the java download site both say about allowing pop-ups and disabling the firewall make me thing that part of the problem is with firefox's compatibility. But honestly, I don't know. I just know that I'm following all the directions I can find and it doesn't seem to be working.
#Download and SAVE the Java installer to your hard drive,
#*SAVE the installer to your Desktop so that you can easily find it
#exit Firefox (Firefox button > Exit '''''OR''''' File > Exit if using the Menu Bar),
#click or double-click the Java installer that you downloaded to start it
#Using Java with Firefox and Download link: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]
#Test your Java after installation: https://www.java.com/en/download/testjava.jsp
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox] -
How to store data in hashmap so that it can be used by different methods.
Hello,
I have an ADF/JSF application and the database is DRM. The program gets data from DRM into this hashmap. Program needs this data frequently. Getting this HashMap is very resource intensive due to a lot of data it has.
I want to get the data in HashMap once ( I can do this - no problem). But where/how do I keep it so that different methods can just use this and not make individual trips to DRM? It may be a very basic java question but I seem to be stuck :)
I am not very concerned about the HashMap part, it can be any collection - the question is of storing it so that it can be used over and over.
Thanks,User,
If I understand you correctly, you have a JSF application that needs to store data in a HashMap such that it can be accessed over and over? You could put the hashmap into an appropriately-scoped managed bean and access it from there. I'm not sure what a "DRM" is (a digital rights management database, perhaps, in which case it's a "database"), so there is something special about a "DRM" that we need to know, please share.
John -
hi there the problem with my iphone is that there are at least two or more contact numbers that i cannot send sms although the rest are working perfectly well can anyone please help?
Tap Messages and make sure Send as SMS is turned on.
If that doesn't do it, maybe Apple's doc will help -> iOS: Troubleshooting Messages -
Open some folders - "Did you know that you can drag ..." locks access to list of emails
How do I stop a message appearing when I open a folder. I just want to see and read, manage, and change emails to a different folder. I cannot open the folder once this message appears.
It's probably giving you that warning because your Firefox is very out of date. Please read [http://www.getfirefox.com www.getfirefox.com] to see how to update to the latest version of Firefox (14.0.1 right now)
-
Another computer is running on Windows XP. I don't want to run Windows Explorer on it to search for Firefox so I can install it to use instead. How do I download the necessary files to a flash drive the current laptop where Firefox is the search engine?
Are you looking for a full version?
*[https://www.mozilla.org/en-US/firefox/all/ All versions] -
I can't open internet explorer on my computer for whatever reason and have given up trying various scans to figure out the problem. I'd like to download firefox as an alternate internet program, but obviously, can't get online to download it. Is there anyway to download it onto a zip drive from another computer, and then transfer it to my faulty laptop?
Yes. You can download the Firefox installer and copy the file to an USB stick or other medium and install Firefox from that drive.
You can find all Firefox versions here: http://www.mozilla.com/firefox/all.html
Maybe you are looking for
-
We are looking to add a newly aqcuired company to our Apps instance. What parameters MUST be shared across both companies? For example, we would not want to use all the same flexfield structures (stock locator, item catalog, item category, etc), sinc
-
How to validate the KFF segments on detail page
Hello ALL, I have a requirement where I need to filter only the segments for KFF basis on the Country at Master level. This form is not going to run from any country specific responsibility. So, while user will enter I need to display only those segm
-
When is Apple going to fix keyboard shortcuts?
iOS6 has been out for more than a year now. When is Apple going to get around to fixing the keyboard shortcuts. They worked perfectly on iOS5 but they only work about 10% of the time with iOS6. Will this issue be resolved with iOS7?
-
What is the scoop on using scenes for personal demo reels from Hollywood movies? Can I put it up on my site, or is that illegal? I'd want to use a clip from LOTR or soemthing similiar. Thanks! J
-
I cant drag and drop in Screen sharing
I have my 2 macs connected via ethernet cable and cant drag and drop or share files from my iMac G5 to my PM G4 QS- both are running 10.5.8-- any i dea why? i can share files with the other macs vie wirelesconnections on my network....