Firefox Black screen with see-through search area/pannel

Firefox has suddenly encountered a problem where, when I open a new window it is black with the search area see-through.
Here is a screenshot of what it looks like:
http://i.imgur.com/JDexobz.png
I've tried resetting and re-installing Firefox to no avail.
Thanks in advance for help and suggestions.

Hello proteinsheikh, to '''solve''' your issue see [https://support.mozilla.org/en-US/questions/1026093#answer-641865 philipp's Chosen Solution].
thank you

Similar Messages

Using Firefox to access facebook chat Button or online friiend chat button generates a Black screen with CANNOT LOAD IMAGES and no chat window opens.

This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.

Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.]

Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP

Hey all.
So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
Thanks!

Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all.

When I use camwow, and I take a picture, then i tap the the little thingy that lets you see it. The picture doesnt show. It just shows a black screen with the camwow retro logo in the bottom right corner....PLEASE HELP IMA CRY.

Please help. Like I said when I go to see the picture it just shows a black screen with the little camwow logo in the bottom right corner. I already tried turning it off and turning it back on, and I already tryed reseting it. PLEASE HELP PLEASEEEEEEEEEEEEEE imma cry.

I've tried that.. twice. It didn't work for me - any other suggestions?

HT1551 what does it mean when I see a black screen with the Apple logo but it wont do anything but that. I have re booted 4 times same outcome. Help!

I just hooked up my Apple TV. I see a black screen with Apple logo. Nothing else happens. Remote functions as I see the white light respond. Have rebooted 4 times but same thing occurs. What should I try.
Thanks.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

We are experiencing a black screen with the Apple symbol and a flashing light. We have tried to reset, unplugged without success

We are experiencing a problem with our Apple TV, it shows a black screen with the Apple symbol and a flashing light. We have tried to reset it by unplugging and pressing the main button on the devise. Please help!

Try a restore.
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

My i pod touch was erased in the find my ipod app this has set my i pod where i cant do a thing but see a black screen with a rotating circle in the middle of the screen. i tryed to restore and itdosent download actual file to the i touch

my i pod touch was erased in the find my ipod app this has set my i pod where i cant do a thing but see a black screen with a rotating circle in the middle of the screen. i tryed to restore and itdosent download actual file to the i touch and i cant do a thing with it please help me fix this and if thereis a way with out lossing my data would be great but however it can be done please let me know asap thank u.

Take it to an Apple Store and they may take care of it for you.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut off to black screen with apple logo. Any ideas what to do?

Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo. Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back. Any ideas what to do?

At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
Regards.

My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!

My TV show purchases don't play correctly. When I click on them, a black screen with no audio plays. The timecode for the show runs, but I don't see or hear anything besides that black screen. Help!

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Xorg-server 1.6 - black screen with mouse cursor

Hi
First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
I added a new test user to my system without compiz and get the same.
I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
I googled this problem and was searching similar things in this froum, but I wasn't able to find something
Here are some files
xorg.conf (i know there are some bullshit things in it, but it was workig )
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Eizo"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "GeForce4"
# Driver "nv"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce4"
Monitor "Eizo"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Eizo"
(**) | |-->Device "GeForce4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
(--) NVIDIA(0): EIZO L578 (DFP-0)
(--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
(**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
(**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
(II) saa7134 IR (LifeView FlyVIDEO30: Found keys
(II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
(II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by MueLLe (2009-04-15 21:35:42)

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

Black Screen with Cursor (Tried most solutions)

To save your time and mine, I’ve tried all options in “press f8” and “recovery disk”. Over the past 3 days, I read almost all threads, videos, articles, and official MS help containing any mention of this problem. I also applied many commands, created few
“SystemRescue CDs” and “Kaspersky Rescue 10” on a usb drive. I follow instructions very well, and have never been stumped by a windows problem like this before. If someone solves this, you are a wizard!
Nothing has worked so far, but I really want to figure this out and not ‘reinstall’. It appears to be a simple and popular problem: “Right after Win 7 boot Logo, I get black screen with white mouse cursor,
no matter if I boot in safe mode, last good configuration, or normal startup”, but all the solutions that worked for most people are not working for me.
TL;DR: (answers to any of the 7 questions in the end will help me out)
Custom System: Win 7 64 bit (updated consistently), 4gb ram, Quad Core 2.66, 64GB SSD (Crucial M4) and 4 hard other drives. Only windows installations/updates have been installed onto the SSD, no other programs. Only 1 OS has ever been installed
on this computer. Never dual booted.
Mobo: Asus Maximus Formula. GPU: AMD HD7870LE
2014-04-19
I haven’t installed or downloaded any programs in the past 3 weeks, and did not notice anything unusual up until this incident.
In the morning the computer went into hibernation because I was away, it couldn’t wake up (usually happens), so I turned off the power supply. Turned it back on, and computer resumed, I was concerned as it may have run out of hard drive space on my 64GB
SSD (4GB free), but it booted fine.
Later during the day, I decided to restart the computer, and as it booted up again, it went into “start up repair”. I let it run and restart, and it arrived at the dreaded Black screen with mouse cursor, of death, right before logon screen.
Symptoms while on this black screen.
Ctrl alt del doesn’t work, power off doesn’t work, cursor can move, pressing ‘shift’ many times doesn’t bring up the ‘sticky key’. No task manager.
Hard drive is not loading anything, just idle.
Computer falls asleep after 15 minutes or so, and can wake up back to this black screen, so it remembers my power settings
Safe mode loads the drivers fine, but also gets stuck on the same ‘black screen with cursor’ forever
I tried every option in the ‘advanced boot’, including ‘safe with command prompt, safe with networking, last known configuration, etc’
Last known configuration, and all of the above, all boots to ‘black screen with cursor’, this means windows believed it booted fine the last time, so it remembered this configuration. That’s because all the drivers loaded without issue. While loading
Safe Mode, I can see windows loading all the drivers ok.
No restore or backups (I know, I do not deserve to live, lesson learned)
I tried all applicable functions from the ‘recovery cd command prompt’, bcdedit, bootrec, diskpart, and still couldn’t get it to boot.
Commands applied in Elevated Command Prompt from Installation DVD: (very careful with backups and overwriting)
Diskpart -> list volume, tells me that 100mb is system reserved, the other 59GB has no label, and is a different partition
Bootrec -> scanos, tells me that I have 0 windows installations, used fixboot, /fixmbr, /rebuildmbr, all successful. Mounting the drive later on RescueDisk’s TestDisk shows no problems with either partition.
BCDedit: shows both boot manager and winloader to be on the same drive, and I referenced it with a typical BCDedit enum output, and nothing is out of place.
I went into Regedit by typing “regedit” in command prompt in Win7 recovery cd, and confimed that ‘Shell=explorer.exe’ under:
HKEY_local machine/software/microsoft/WindowsNT/Currentversion/winlogon.
Sfc /scannow couldn’t run due to “Pending repairs/restart”
So I used: SFC.EXE /scannow /offbootdir=c:\ /offwindir=c:\windows
Which ran and repaired some errors the first time. I ran it more just to make sure, with restarts in between, it gave me
Win resource protection did not find any integrity violations.
So the system files appears to be fine and not corrupted.
Bootrec /scanos does not detect any windows installations. “0 Windows installations identified”, yet “Diskpart -> Detail Disk” and bcdedit both detects the windows directory.
From windows recovery disk:
Startup Repair diagnosis: (Show Details)
All tests completed successfully
Boot status indicates that the OS booted successfully
It seems that the system and the OS boots successfully, and windows believes it boots successfully (that’s why last know good configuration gives me the black screen also, and Win Startup Diagnosis all says it booted successfully”
It’s the second before it enters into the logon screen, the black screen and movable cursor appears, and hangs here forever. What programs load during this step, and how can I find out this info? Is there a diagnosis tool that allows me to see the programs
as they load during windows start up?
Other attempts:
Then I read it could be windows using “winresume.exe” instead of winloader.exe, since I have “hiberfil.sys” in C:\windows, so I backed it up and deleted it using SystemRescue.
Another thread said “winevt” bad logs, in C:\windows\system32\winevt were causing this black screen, so I backed it up and deleted that also, and it still won’t boot.
I plugged in the devices that were attached (just 1 ext hard drive, through a 10 port usb hub) that was connected while it went into hibernation on April 19th, and it didn’t help.
The files on that disk and the file system is not corrupt; I tested it by taking it out and docking it on a usb Blax Duet, and my laptop did a scan disc, and it’s fine. The Sfc Scan also shows that it is ok.
I also unplugged all the other sata drives, switched the SSD sata cable around to other sata ports to no prevail.
So far I know:
Very unlikely that it’s a virus problem, I haven’t installed or downloaded anything this month, scans from Kaspersky 10 rescue disk shows nothing, Farbar scan shows nothing. I also never install anything suspicious, like toolbars or junk. I scan regularily.
Not a driver problem, since I haven’t changed or updated anything. I unplugged all devices, and starting in 640x480 mode also gives the black screen with cursor. Drivers all loaded fine while starting windows and safe mode
Boot files are intact, windows system files are in the right place since windows actually boots into a shell? Both bootloader and boot manager show up in bcdedit enum scans
Not due to system file corruption, since file integrity are confirmed ok by above CMD commands, and windows diagnostic tool, and testdisk.
My questions:
What could be the cause of this? I didn’t make any changes to BIOS, windows settings, perform any updates, suspicious activities, installations, or crashes, before this. The files on that disk and the file system are not corrupt either, I tested it by
taking it out and docking it on a usb Blax Duet, and my laptop did a scan disc, and it’s fine.
Which program (classpnp.sys? explorer.exe? winlogon.exe?) is being loaded right before “windows logon screen” that would cause it to hang with a black background and cursor?
How can I find out this information? Is there a tool that can record all programs that are being loaded by windows at boot?
I only have access to regedit, elevated command prompt, and I can change files through SystemRescue or Kaspersky recue, how can I get the computer to boot past that black screen with a mouse cursor? The answer seems so close.
From the Rescue Disks, what could I really do to get past the black screen?
Those who are computer technicians could tell me: If I take it to a computer shop or technician, what could they do in a situation like this aside from all of the above? Do they have some ‘next level’ access tools or are they just going to waste my time
and tell me I have to reinstall?
At the very worst, I will obviously reintall. On my 64gb SSD, I didn’t install any important softwares. All my important software installations are on a separate drive. However, will they still work if I did a ‘Inplace Upgrade’ install of windows? Does
registry get wiped?

Hi,
Have you tried to take startup repair when booting with the rescue disk?
Startup Repair
And we'd better bring the PC to the vendors, then take an examination of the hardware health.
How does the Bootrec /scanos show 0 installation identified? We may take a try with chkdsk from command line to check if there are any disk errors:
Run Check Disk from a Command Line to Check for and fix Disk Errors
Please also take a check if the system reserved partition is stay in health:
Understand (and Get Rid of) the Mysterious Small Partition
Another shoot, please try to rebuild BCD:
Use Bootrec.exe in the Windows RE to troubleshoot startup issues
Regarding the repair install, detailed information please take a check with the article below:
How to do a repair install to fix Windows 7
Hope this may help
Best regards
Michael Shao
TechNet Community Support
Did you read his post at all as it does not look like it.
As to take it to a vendor "Custom System:"" Win 7 64 bit (updated consistently), 4gb ram, Quad Core 2.66, 64GB SSD (Crucial M4) and 4 hard other drives. Only windows installations/updates have been installed onto the SSD,
no other programs. Only 1 OS has ever been installed on this computer. Never dual booted."
As to your other suggestions he has tried them all as have thousands of us out here , all you have to do is search the internet and you see millions of hits about this.
And glad to see a moderator can mark a non answer as an answer.

Black Screen with Apple Logo randomly appears.

HELP! When I'm using my 60 gig 5th gen. ipod...I listen to a song, or watch a movie and after 2-5 the song/movie stops, and the black screen with apple logo appears. It almost seems like the ipod is just reseting itself or something. I don't understand the problem.
eMac Mac OS X (10.4.3)

Hello!! I had the same issue. (with the 30 Gig) Eventually, my iPod went berserk, and kept reseting over and over until the battery died.
I did fix it. It's pretty simple, in fact. Warning: ALthough i hate to say it, you need to update to iPod software 1.1. There are several bugs with this update, see the thread with all the replys. However, it seems to be more annoyance than real issue, and 1.1 completely, utterly stoped the apple logo screen. The saving of my battery, and prevention of the resets, to me, outweighs the minor annoyances of glitches with the update.
Glitches i've noticed: holding the menu button no longer turns on/off the back light. Some videos no longer copy to the iPod, despite the fact that iTunes can play them, and the used to copy, and are within iPod's capabilities. They are generally converted with a program other than QuickTime. There are others people hae noticed, but that's all that i've seen so far.
Since you have Mac 10, simply do a software-update, and download all the neccessary software. Update the iPod.
Some videos are not likely going to copy to the iPod. This is due to the update. You need to re-encode them. If you don't want to pay for QT Pro, there's a free utility to covert nearly any video to iPod format. It's called iSquint. (do a search on versiontracker.com) I've used it a lot in the last few days, and it's great! The videos it converts seem perfectly suited to iPod, despite the update! Unfortunately, there seems to be no way around the error iTunes gives you about not-copying videos due to iPods's inability to play a video without a re-encode.
Hopefully, this will help you out!
-Dan
Powerbook G4 Mac OS X (10.4.4) iPod 5G, 30Gig, system 1.1

Black Screen with Blinking Courser

I shut down my server last night to install some new network hardware and a UPS for the entire rack. When I went to boot up my main windows server 2012 R2 Datacenter server it would go through BIOS just fine but once it got to the part where it is supposed
to boot windows it would just sit at a black screen with a blinking line at the bottom of the screen. I tried restarting the server, did not fix anything. I tried using an install disk to repair it but it does not want to do anything with the install disk.
I have ran out of any ideas on how to fix it. Any help will be much appreciated.

Hi,
As new hardware devices are installed, your first step should be removing all these new devices and boot the computer to see the result. Sometimes new hardware devices could cause similar issue due to compatibility issue.
If still failed, please keep pressing F8 during your reboot and see if it will bring the boot menu. Test to boot into Safe Mode to see if it will work. If so, a quick solution is to do a system recovery if available.
Note: You may lose new files created after the date of recovery point.
PS: As you mentioned a disk repair, you may not able to do this without a Windows Server 2012 R2 disk.

Black screen with underscore after updating ubuntu on Lenovo G560

hello everybody, I'm new here. I looked for this problem online during the past few days but I haven't found a solution. I have a Lenovo G560 and I divided my hard drive into two partition, I installed Ubuntu on C:\ and Windows on D:\ and I haven't had any problem, but after updating ubuntu to version 14 my computer couldn't boot anymore. the bios loads and I see the Lenovo icon but then I just get a black screen with an underscore (not a blinking underscore), I tried booting from a bootable USB stick but the same thing happened (I put it as the first device to boot from in BIOS settings). can anyone please tell me what are my other options ? what should I try now ? thanks in advance and have a good day !

Hi s, and welcome to Apple Discussions.
Try this:
Hold down the Option+Command (Apple)PR keys, boot/restart your MBP while continuing to hold down those four keys, and after you hear the startup chime for the second time, release the keys. That should reset your PRAM and resolve the issue.
If the issue persists, while you're booted into Open Firmware, just after the prompt, type in:
reset-nvram
then press return, then type in:
reset-all
and press return. This should restart your MBP and it should go back to starting normally.

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

Firefox Black screen with see-through search area/pannel

Similar Messages

Maybe you are looking for