Firefox continues to warn me that the web site I am using does not have a valid certificate, even after I have repeatedly created an exception for this website

The site is an https secure site that I normally visit with IE, however parts have become inaccessible to me on one particular computer that I use for an unknown reason...( Vista sp2)
I decided to try Firefox and it works well, except for the annoying reminder every time I try and log in to the website that its security certificate is invalid...

I would suggest running the network via a pc for the day.. pick either your Mac or win7 pc.. you will need to do a bit of fiddling.. even better would be to just borrow a router. Or buy one on a 7day return .. !! Beg borrow.. don't steal. Just get a router other than TC. it won't take long to determine if the TC is the issue.
IMO at 18months you are suffering failure of the TC power supply. early days but it is showing signs of delinquency. And will get worse. But another router will show it up.. if the PC has dual ethernet cards you can run ICS.. or same sort of thing on the imac to the wireless .. ie the PC or Mac becomes the router with direct connection to the cable modem. Then share internet from there.
Once you do that for a day or two, you will quickly be able to track down if the issue is cable service/modem or the TC as router.

Similar Messages

When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until 10/2014.

When I attempt to access my IRA account on line, I get a message saying that the web site requires a client certificate. The certificates listed in the drop down dialog box don't get accepted, even though one is indicated as valid and good until October 2014. I contacted the IRA account managment company and they sais it's an Apple issue. Any ideas?

Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP.

Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
Ed

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

MDT 0xc0000098 The windows boot configuration data file does not contain a valid OS entry

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help

hello,
i installed WDS+MDT for OS deployment. all was working fine.
Now i need our branch office to be able to deploy OS as well.
I installed a new Win 2008R2 server, and installed the WDS service on it.
When reading about this on the internet i saw i need, on the MDT at our main office, to make a link, under "Advanced Configuration" - "Linked Deployment Shares" to the new WDS server (I used this: http://www.balm.se/?p=115")
when doing so i entered the UNC path to the new server and then, on the created link, i right click and choose "Replicate now".
after doing so, i tried booting a laptop just to see if there is any impact, and now, I'm getting this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your windows installation disk and restart your computer
2. choose your language, and then click "Next"
3. Click "Repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows Boot Configuration Data file does not contain a valid OS entry.
I know that usually when I'm getting this message, it means that a previous MDT installation was started and did not finished correctly, and the are some [stuff] on the HD, so i do a partition erase and start over and all working fine.
Now it's not working. I tried several computer, even new ones, and NADA.
someone know the cause?
I know I read something, i don't remember where or how to find it, that when doing the steps I did, it alter\change some ini or xml, or something like this. is that true? any one know on what file do i need to look and see if something is misconfigured?
thanks a lot for your help
For a branch solution I would use DFS(R) rather than linked deploymentshares.
If there is infrastructure at the remote sites you could use the MDT environment at your main site, and then at each other site use an existing server or build a new server (VM is available). Create a Deploymentshare on each sever
and copy the contents of the MDT environment from the first site into this share. Next you will have to add the WDS service to each site's server. For WDS add the boot image. Of course as Keith noted ensure that you
have the same versions of MDT and the WAIK/ADK on all systems
You can use DFS to replicate to all of the other sites, but you will still have to create a deploymentshare, and install WDS at each site. So each site talks to its own WDS server you can use the DefaultGateway parameter instead -
[Settings]
Priority=Default, DefaultGateway
[Default]
SkipBDDWelcome=YES
[DefaultGateway]
192.168.10.1=Bergen
192.168.20.1=Oslo
[Bergen]
DeployRoot=\\MDT-Bergen\DeploymentShare$
[Oslo]
DeployRoot=\\MDT-Oslo\DeploymentShare$
If this post is helpful please click "Mark for answer", thanks! Kind regards

Using ios8.1 on iphone 6. icloud is enabled. when I add a contact on the phone it does not appear in icloud contacts even after backup. Pl help

using ios 8.1 on iphone 6. when I add a contact on the phone it does not appear in icloud contacts even after backup. pl resolve

Hello feroziem,
The article linked below can help get iCloud and your iPhone to synchronize your contacts.
Get help using iCloud Contacts
http://support.apple.com/en-us/TS3998
Cheers,
Allen

Firefox version 4 does not work with Mac OS 10.4.11. Is there a fix for this? Alternatively, how do I download an older version of Firefox that will work?

I have a an older IMAC as a second computer. I replaced an older version of Firefox with the new update. I had to do this because Firefox gave me a message that the older version would no longer work. The new version 4.0 will not open even after it is put in the applications folder. I get a message that says this version is not compatible with my Operating system. I don't want to change the OS at the moment.
Can anyone help? I'd like to just download an older version of Firefox if that is the only way to make this work, but I can't find an older version on the website.
Thanks very much.

http://www.mozilla.com/en-US/firefox/3.6.13/releasenotes/
Had the same problem; would have been nice if they had told s that we need an intel processor on our older Macs! I am up and running again.

I get a message that says "Safari browserversionyou are currently using does not support the community toolbar

I get an annoying message everytime I open Safari. It reads - "Safari browser version you are currenty using does not support the commuinty toolbar" How do I get rid of this

victoria Hamlin wrote:
it didn't... but at least I know where to find the Library- any other ideas?
Instead of being installed as a standard plug-in, the Community Toolbar uses the system loader "launchd" to load the plugin on-demand whenever Safari is opened. You will need to remove three components that are installed, starting with the binary files.
The binary file is the actual toolbar application, and is located in the /Library/InputManagers/CTLoader/ folder. Removing the entire CTLoader folder will remove the application and other files that are installed along with the toolbar. If you just care to quickly stop the toolbar from loading, doing this will be enough to keep it from loading.
With the binary file removed, the toolbar will no longer launch; however, the system will still try to load it when Safari is opened because the system launcher instructions file is still installed. While having these instructions present will not cause a decrease in performance, removing them will prevent the system from outputting errors and warnings in the system log files.
Removing only this instructions file is another way to stop the toolbar from loading; however, it will require either the use of the following command in the Terminal (done before removing the file) or a restart of the system after removing the file to unload the instructions from the system loader and prevent the toolbar from launching.
sudo launchctl unload /Library/LaunchAgents/com.conduit.loader.agent.plist
The final components to the toolbar are some resources that it uses, which are relatively benign and will become unused "orphaned" files when the other components of the toolbar are removed. These files are all located in the /Macintosh HD/Library/Application Support/ folder in a directory called Conduit. Remove this directory and the toolbar in its entirety will be removed.

Firefox claims that my e-mail in-box is full & cannot download any more messages, even after I have cleared the majority of the files from in-box, out-box & deleted box.

When I returned from holiday there were hundreds of messages waiting for me, but Firefox would only open the first few. Some that I tried to open just showed a balnk page, others showed a page of hundreds of lines of letters & digits. Every time that I open Firefox I receive the message that the IN-box is full.
I appear to be able to send messages, but not receive them.
I have spoken to Virgin Media who say that all messages can be accessed via another server(?) - e.g. Outlook Express, so it must be a Firefox problem!

Firefox doesn't do emails.
If your question is about the Thunderbird program then a good place to ask is at the MozillaZine Thunderbird Support forum.
That forum is better suited for questions about Thunderbird, this forum is aimed at support for Firefox.
See http://forums.mozillazine.org/viewforum.php?f=39

I just downloaded Firefox 5 but found out that 1passport which is my password program does not support 5 unless I upgrade to Snowleopard. What I need to do is go back to Firefox 4 so I can use 1passport.

Need to go back to Firefox 4 so I can use my 1password security program.

MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

My i phone 4s will let me download free apps but when i try to buy an app it asks for my billing imformation and tells me that the. Imformation i typed in does not mach my bank records. Ive also tried using my wifes. Any ideas

When i try to buy an app from the app store it ask for my billing imformation and when i type everything in it tells me the imformation does not match my bank records. Ive also tried using my wifes card to buy apps and it says the same thing. Any ideas?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Are you putting in the address where the bank sends the monthly statement?
Apple's servers are very picky about the format of the address. If you live in the USA, then the server is expecting the style that the US Postal Service uses. One way to do this is to use the USPS ZIP Code lookup service;
https://tools.usps.com/go/ZipLookupAction!input.action
Enter the address to look up the ZIP code and then copy the exact USPS output into your iTunes account information.

My iPhone seemes to think that the headphones are connected egen they are not. So to talk to someone I have to put it On speaker or put in some headphones. I can't hear music and there is no sound egen i Get an sms or og I try to change the sound for sms!

Why does it Think so and is there something I can do to fix it or do I have to send it in for fixing.?? tried to reset it..

The same thing happened to me on my old iPhone 3G. My guess was that water entered the headphone jack, and somehow made some short inside it making the iPhone believe that the headphone was plugged in. Pluggin and unpluggin the headset many times proved that sometimes it worked ok for a while, so what I did to solve the problem was spraying some good quality contact cleaner inside the jack, and voilá, still works fine after one year of the problem. Make sure you use a good quality contact cleaner WITHOUT LUBE, ( WD40 IS NOT GOOD FOR THIS PURPOSE) otherwise the lube will remain in the inside of your screen without a chance of cleaning it unless you dissasemble the iphone. A good quality contact cleanner should displace water and grease,and leave no residue after it evaporates ( IPA Iso Prophyl Alcohol, Hexane, or Heptane based products are ok)
The other possibility is taking it to the repair shop, and have it looked by an expert. Good luck!

How has moving the Home button and the refresh button improved Firefox? Peo grow accustomed to the location of features, moving them does not improve the browser.

Moving the location of features such as the Home button and the sometimes refresh button does not improve the function of the browser. It simply forces users to re-learn the location of these features and put up with the associated inconvenience. Why, what have you gained?

what a ridiculous reply. moving the home button is a pain when it has been on he left for many years now. why the change? are you trying to mimic ie? i hope not.
it doesn't create more space on the toolbar - in fact he default setting for firefox 4 removes space. by moving the home buttons and other buttons back it increases the space back to where it was before.
also why did the history button change to be a button on its own rather thn attached to the forward / back buttons?
to say it's not worth changing it for one person is a nonsense answer. i know loads of people who say it sucks so have had to customize it to change it back to how it was.

When I try to send photos over the internet now, it says it does not recognize my account or pssword. I have never had this problem before, so what can I do to fix it?

When I try to email photos from iphoto, I get a message that says it does not recognize my account or user name. I have not had a problem with this before, so why now? How do I fix this?

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

Firefox continues to warn me that the web site I am using does not have a valid certificate, even after I have repeatedly created an exception for this website

Similar Messages

Maybe you are looking for