Firefox crashes after Carbon Copy Cloner

I powered on the computer, and did not open anything other than Carbon Copy Cloner. I then copied one entire hard drive to another. Everything works, such as Thunderbird and Opera Next, except for Firefox! As it's my primary browser I have spent an hour or two trying to work out a few things. This was the second Carbon Copy Clone I did and it didn't state any errors during the copy process. Firefox was working flawlessly on the other hard drive.
If I open Firefox it goes straight to crash reporter - no Firefox window. If I try and open profile manager the same happens, and if I try and open in safe mode the same happens. I have tried repairing disk permissions. There is no sign of Firefox being open in Activity Monitor

please see this article and follow steps to send us the report of your crash
[[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]

Similar Messages

External Hard Drive Unreadable After Carbon Copy Cloner Backup

I am using a Maxtor OneTouch III Media external drive. I had formatted it to be read/writeable from Mac OS X 10.4 Tiger, and had been reading and writing files fine. Then I did a system backup to the external drive with Carbon Copy Cloner. Now when I plug the drive into the USB port, it says "the disk you inserted is not readable by this computer." I am guessing that Carbon Copy Cloner may have messed with the file system format. I had some pretty important files on there and would like to retrieve them, so I'd prefer not to reformat.
Disk Utility shows this information for the drive:
Name : Maxtor OneTouch III Media
Type : Disk
Disk Identifier : disk1
Media Name : Maxtor OneTouch III Media
Media Type : Generic
Connection Bus : USB
Connection Type : External
USB Serial Number : RA09E5XC
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 149.1 GB (160,041,885,696 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Also, Partition Scheme : Unformatted
I know that the drive had a name (besides the generic "Maxtor OneTouch III Media) before I did anything with Carbon Copy Cloner. Is my data already gone?
Message was edited by: theleez

Hi , and a warm welcome to the forums!
I think the problem is more the One-touch, they can't boot PPC Macs even via Firewire.
I think you'll have to Reformat it again... did you maybe use GUID Partition Scheme the first time?
See this, except for the GUID part...
http://carlbach.blogspot.com/2008/02/maxtor-one-touch-iii-and-formatting-on.html

Two problems after Carbon Copy Cloner use

After replacing a dead hard drive in my MacBook Pro. I used CCCloner to copy the hard drive from my iMac to the macbook. Everything is great with two exceptions.
1) I can no longer print to my shared printer over WiFi. The printer is hardwired to the iMac via USB.
2) When trying to download shareware, freeware or a purchased game (snood), the download window opens in a new tab and NEVER starts. Downloads from other sites i. e. ezShare, megaupload etc. work flawlessly.
Any help would be great.

After replacing a dead hard drive in my MacBook Pro. I used CCCloner to copy the hard drive from my iMac to the macbook.
You have 3 computers listed in your computer information, including a Macbook. So after replacing the hard drive in your MBP you used CCC to copy the iMac's drive to the Macbook, or the Macbook Pro?
Strictly speaking one shouldn't clone the system from one model computer to a different model because of possible incompatibilities, but I think most people get away with it.
Did you verify the hard drive with Disk Utility's first aid before doing the cloning? Did you repair permissions?
2) When trying to download shareware, freeware or a purchased game (snood), the download window opens in a new tab and NEVER starts. Downloads from other sites i. e. ezShare, megaupload etc. work flawlessly.
What are you using to download? From what site? It seems to work with some sites from what you say. Are you using any plugins?

New HDD getting restart message after carbon copy cloner

Hey folks,
Been a while since I asked for help, but always glad you are here.
My 160GB HDD was getting close to its limit and slowing down quite a bit, so I figured I'd upgrade to a 500GB Seagate 7200rpm HDD.
Used CCC to do a complete clone. Did the Clone with 500GB drive in a FW enclosure. Took roughly 2 hours and then rebooted from the new clone while it was still in the enclosure. Everything worked fine.
Installed new clone drive in macbook(I have done this before when I went from the original 60GB to 160GB drive and have all the correct tools)
Try to startup with new drive installed and get the greyish mini screen with message to hold start button until it shuts down and press start button again. Tried 5 times with same results.
Should I go ahead and re-clone or use my grey disks to run hardware test?
MB1,1 2006, 2gigs ram 10.6.7
Thanks for any and all help.
Adam

Okay. Ran hardware test. No problems found. Checked HDD connectors on both the MacBook and the new HDD. Look fine.
Tried reseating the new HDD to no avail.
Reinstalled old 160 GB HDD and MacBook is running fine as we speak.
Going to try re-cloning. If that doesn't work will try reformatting and doing a fresh install and migration assistant.
Adam
Anymore ideas before I go to far would be appreciated.

Mac Pro Boot slow after Leopard Update and Carbon Copy Cloner

I just purchased a 1TB Internal hard drive - Seagate Barracuda 7200rpm - and used Carbon Copy Cloner to clone my original hard drive (which is running Tiger). Everything seems to be normal, except the the long boot up process. The desktop appears, the dock appears, and then there is a long pause of 20 to 30 seconds before the drives mount and and the desktop folders appear. I have 10 gigs of RAM, I have rebuilt the Directory with Disk Warrior 4.1, and also repaired the disk permissions (although some of them state that they can't be repaired). When I reboot from my original 250 Gig hard drive, the boot is lightning fast. Any thoughts? I have many third party software programs installed and am trying to avoid a fresh Leopard Install. Thanks, this is my first post!

this may happen on the first boot on a cloned drive because the system has to rebuild various caches that are not cloned. it should be back to normal boot speed after that.

Finder crashes when backing up time machine or carbon copy cloner

I'm trying to create backups of my system, i did have time machine running to a secondary drive internally, but that stopped working at some point and i assumed it was a bad partition.
Everytime i try to create a backup through timemachine it would crash the finder (though it would never create a crash report, just hang) i'd have to hard crash my machine to get it running again.
I verified and repaired any permissions, dumped pref files but still no joy.
I've now bought 2 new drives for clone / backups, thinking the drive is perhaps corrupt.
My plan was to use carbon copy cloner and clone the main hdd as a safety,( incase it was a time machine issue) but its doing the same with CCC-
when i hit clone the finder window pops up asking for my admin password, but beachballs and wont let me type anything. i can select anything with the keyboard (i.e. Jump between programs, or force shutdown running apps) i can shutdown using the file menu but i can close any open windows.
I can copy files manually, but i want a bootable backup of the main hdd (i'm a video editor and reinstalling an entire suite is not good when on a job)
Can anyone suggest a workaround to cloning the main hdd (even if it does have a bug in it, i'd rather have something safe before i do a fresh install)
Cheers

That should read 'CAN'T select anything with the keyboard or finder'

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

Mountain Lion is missing, after installing an external hard drive and Carbon Copy Clone.

I have a mid-2007 desktop iMac Model MA877LL, 2.4 ghz/1gb/320gb, with 4 GB memory, upgraded to Mountain Lion 9/7/2012 at an Apple store (now 10.8.5). I just installed a new external hard drive Fantom Drive 1T G-Force Mega Disk Firewire 800, then installed Carbon Copy Clone successfully. However, I could not get the clone to boot from the backup volume. Mountain Lion showed in both Macintosh HD and External Hard Drive at that point. After working through many steps with CCC, trying to get it to boot, the final suggestion was to try installing Mountain Lion onto the backup disk via the Mac App Store Installer. As my Mountain Lion was installed at an Apple store, there's no record of it on line and I can't find an installer, although I've been doing updates as they're issued. Per article, "OS X: Installing OS X on an external volume", I erased and reformatted the storage device. Now, checking my Macintosh HD, Mountain Lion is gone. How do I get it back?

Woodswalker wrote:
...Per article, "OS X: Installing OS X on an external volume", I erased and reformatted the storage device. Now, checking my Macintosh HD, Mountain Lion is gone. How do I get it back?
Are you saying that your internal HD doesn't have an operating system on it either, meaning you can't boot your iMac at all? Or that the external was also named "Macintosh HD" in which case, having been erased and reformatted (hopefully with a GUID partition table), you'll need to clone your internal to it once again.

Can I continue using Carbon Copy Cloner after upgrading to Snow Leopard?

Hi the last time that I backed up my Mac Pro to my external hard drive using Carbon Copy was when I was on Leopard. I recently upgraded to Snow Leopard, can I continue using Carbon Copy Cloner on Snow Leopard or do i have to format the external Drive? Thanks

For compatibility make sure you have the latest version (3.3)
http://forums.bombich.com/viewtopic.php?t=14836

How can we disassociate an Apple ID from a set of computers formated from a single computer using Carbon Copy Cloner and a single image and then Migration Assistant to install their old profile? The original ID is the Apple ID for all the stores.

Here is a bit more detail.
We were replacing old teacher machines and wanted to do it as efficiently as possible. Therefore, we set up one computer, through the OS installation and ran all updates, and then made a disk image so that we can use Carbon Copy Cloner to image all the other computers without having to run all the other updates. Once they were set up to a base level and assigned to a teacher we used Migration Assistant to import all their old files and items. Everything has been fine until recently the computers became aware of needing an update for one or two apps. The machine asks for the original computer's Apple ID for all updates. We have logged out of the apple id and back in with another to test if running the updates will work with that Apple ID and even after a refresh it still asks for the other Apple ID. How can we disassociate the Apple ID from those other computers so that the individual who owns the original is not needed each time there is an update or has to give out their Apple ID password?

There are two parts to this:
1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

On a Mac mini OS X server 10.8.5 TimeMchine cannot copy 2.5 TB to a 6 TB Thunderbolt disk, runs out of space, Carbon Copy Cloner works perfectly

On a Mac mini OS X server 10.8.5 TimeMachine cannot copy 2.5 TB (from a Lacie 2big Thunderbolt data disk) to another 6 TB Thunderbolt disk, runs out of space, Carbon Copy Cloner works perfectly: claiming just 2.5 TB after the copy. Thunderbolt disk is
LaCie 2big Thunderbolt Series 6 TB

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

PS CS4 will not open after carbon copying drive to new SSD on MacPro

PS CS4 will not open after carbon copying drive to new SSD on MacPro. Pop-up windows inform me that the scratch disk is not available. I would appreciate any advice on how to rectify this problem.
Thanks
marco

Thanks avanishdivya.
I was hoping to avoid that route, but guess it's all I can do.
Thanks for your quick response.
Do you know if it is a Carbon Copy Cloner issue or just the way Adobe sets it up?
For future reference, where should the scratch disk reside? I heard it should not be on the boot drive?
marco

Good news about Carbon Copy Cloner

After reading a post from Mike Bombich at his Carbon Copy Cloner web site that he knew of no reason CCC wouldn't work under Rosetta on the new InteliMacs I decided to try cloning to an external FW400/USB2 Maxtor drive, and indeed he is correct!
Bombich warns that CCC hasn't been thoroughly wrung out on Intel hardware, and that you can NOT mix clones: an Intel clone will NOT boot a PowerPC Mac, nor vice versa.
The only real trick is to be certain to partition the clone drive in the new GUID Partition Scheme listed under Options in the Partition page of Disk Utility. From there CCC runs like it always has, and Bob's your Uncle.

I recommend checking CCC's Help and the stickies at CCC General Tips http://forums.bombich.com/viewforum.php?f=2. If you still have questions, post them to the CCC Troubleshooting forum at http://forums.bombich.com/viewforum.php?f=3—Bombich Forums Moderator.

HELP! Has Carbon Copy Cloner Killed This G5?

I've got myself into a right old pickle, and wondered if any of the Mac faithful would be able to share any bright ideas on how to proceed.
Essentially, here's how I spent my Bank Holiday;
Mission - To completely clone the 150GB System and 230GB 'Projects&Sounds' internal drives on a Dual 2GHz G5 - both drives over 99% full. OS=10.3.5
Began by downloading SuperDuper only to find Sys Reqs not met. (10.3.9 required).
Used Carbon Copy Cloner to duplicate 230GB Internal to 240GB partition of 400GB Ext FW800 drive - all good.
Used CCC to move 56GB of files from 150GB Ext FW400 drive to 130GB partition of 400GB Ext FW800 drive - all good.
Used CCC to clone internal 150GB System drive to 150GB Ext FW 400 drive. 'Bootable clone' selected.
At end of cloning process, with roughly 1GB left to go, CCC hung up.
Force quit CCC yielded no result.
After 2 hours, whole system was frozen, including menu-bar clock & dock. Hard restart from power button.
Stalled at grey screen - Apple & spinning cursor
Disk utility verified all clones OK - backups intact. Initial side by side check reveals all files seem to be present.
Mission now to get G5 going again.
Hooked up 1st G5 by firewire Target Disk Mode to 2nd G5.
Ran Disk Utility on 1st G5's System drive from 2nd G5. Error reported; "The underlying task reported failure on exit (-9972)" Also reported "Keys out of place" Failed to verify/repair.
Installed Disk Warrior 3.02 on 2nd G5 & ran on 1st G5's System drive. Reported major differences between original and rebuilt directory in preview, chiefly in HD Library (App Support) & System Folder.
Made note of differences and rebuilt directory of 1st G5's System drive with Disk Warrior.
Rechecked with Disk Utility, 1st G5's System drive appeared fine this time.
Attempted to boot - stalled at grey screen - Apple & spinning cursor
Booted 1st G5 into Single User mode; fans screaming; reported
"Can't open Library: / System / Library / Frameworks / CoreFoundation.Framework / Versions / A / CoreFoundation (No such file or directory, Errno = 2)"
Ran fsck, all good.
Exited Single User mode, Finder failed to launch.
Relaunched Target Disk Mode, copied missing file from clone back to original.
Attempted to boot - stalled at grey screen - Apple & spinning cursor
Booted into Single User mode; reported huge screen of gobbledygook (see pic!)
Attempted to reinstall System 10.3.4 (Archive & Install) from Install disk - got first kernel panic
Would not boot from install disks
Ran Apple Hardware test - test would not run
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Apple PowerMac7,3.5.1.8f2
BootROM built on 05/21/04 @ 10:56:59"
Reinstalled system 10.3.4 over firewire Target Disk Mode from 2nd G5 using Install disks.
Attempted to boot - Kernel panic.
Ran Apple Hardware test again - test still would not run.
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Apple PowerMac7,3.5.1.8f2
BootROM built on 05/21/04 @ 10:56:59"
Unplugged all FW & USB peripherals
Removed all but 2 of RAM chips (8 x 1GB DIMMS installed in machine altogether)
Attempted to boot - Kernel panic.
Swapped RAM around in pairs
Attempted to boot - Kernel panic.
Ran Apple Hardware test again - test still would not run.
Error - "Invalid Memory Access at %SRR0: 00000000.00000000 %SRR1: 10000000.00083030"
Ran out of ideas, patience and hair to pull out. Went home to sob on the wife's shoulder and hug the cat.
Now what?
I have to get this computer working again fast!
cheers, and sorry for the long post
Dave
G5 2GHz Mac OS X (10.3.5)
G5 2GHz

Just an update on the situation;
First of all, many thanks you guys for all the replies and helpful suggestions - I was a few millimetres from the end of my tether when I first posted.
After I ran DiskWarrior on the System Drive, it appeared to be OK according to both DU and fsck, so I was able to do another backup copy of all the important stuff. I'd already used Target Disk Mode to create some space on it, prior to my Archive and Install of 10.3.4 over firewire. This still had no effect, however.
As luck would have it, yesterday morning a mate of ours who is an audio systems tech was in the building on another job, so he popped by to have a look. When I opened it up, it was like it had been found in the middle of an ancient pyramid, brown sandy dust all over the fans and the heatsink. We performed a PMU reset, swapped the ram around again, unplugged the HDs and attempted to boot from CD - still no joy. Quite a lot of swearing though.....
My techy mate confirmed my worst fears that it is most likely a blown processor or logic board. We're going to swap in another system drive today just to make sure, but it doesn't look good. Fortunately, he was able to loan my colleague another machine to use whilst the G5 goes away to sickbay for diagnosis and a no-doubt costly repair, but we still had to reinstall and reauthorize the mountain of plugins (over 250!), then copy over more than 100Gb of project and audio files from the backups, which took until 10pm last night to accomplish. We'll have to do the same thing again if and when the original machine comes back from repair.
I'm devastated, this is exactly the disaster I was trying to avoid in the first place. I didn't know you could clone from DU (thanks Tom) - if I did, I probably wouldn't be in this mess..... you live and learn, eh?
This morning though, everything seems to be running fine, the temporary G5 is performing well. Three days behind schedule, looking at a possible £1500 repair bill, but at least we can get some real work done now!
Thanks again to everyone
Dave
G5 2GHz

SuperDuper or Carbon Copy Cloner, which one to use in my case?

Let me start of my saying what i am going to be doing...
Right now i have Panther on my Mac, i am going to install Leopard and do a clean install which will erase everything on my Mac's HD, so i bought a external FireWire HD to backup all of my files , i was actually just going to backup my music, pics & videos but then i was told that the best thing to do is to backup the whole HD (don't know why this is necessary).
So the carbon copy cloner is the most popular here on the forums while Super Duper looks like it's very simple to use, the only problem i see with Super Duper is that it's not Leopard compatible but i don't see that as a problem in my case since i am going to be using Super Duper with Panther and then i am assuming that i can manually drag and drop files i need ( music, pics and videos) back on my Mac's HD after i install Leopard, am i right here?
Please reply with any advice you have or suggestions, greatly appreciated if you will, thanks in advance.

Marat Voznyuk wrote:
i was told that the best thing to do is to backup the whole HD (don't know why this is necessary).
Because that allows you to revert to a known, good, bootable OS, in case your Leopard installation fails. It also allows you to simply use the Migration Assistant with a successful Leopard installation.

Firefox crashes after Carbon Copy Cloner

Similar Messages

Maybe you are looking for