Firefox crashes for no reason when there is a tab open for MSN.

I use MSN as the first tab on my browser. I can open the browser and work on multiple tabs. But when I leave the browser open for several hours, it's started to crash. I've checked each of my tabs and the only time it crashes is when there is a tab for MSN open. In fact, I closed all the tabs except MSN and the browser crashed.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Similar Messages

When there are several tabs open, why does the search always take place on the 2nd tab (the first tab seems never to change from the home page) despite my selecting a different tab in which to do a google search?

I have Mozilla Firefox 10.0. When I open it, it correctly opens on the homepage in the first tab. Once I have another, or several, tabs open, no matter which tab is active, any google search I do immediately takes place in tab No 2. It doesn't seem to matter how many times I go to e.g. tab 4 to do a search (because I wish to compare with the webpage open in tab 2), yet it always now does the search in tab 2. This is very irritating. There must be some setting that has gone pear-shaped, but where/which? Any suggestions? Thanks.

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

I have downloaded Firefox 5.0 and now when i have mutiple tabs open and I close Firefox it no longer saves them. Is there a way to fix this?

The Restart Firefox add-on is not compatible

Firefox 4.0 on WinXP shows the Menu bar by default, the orange Firefox button appears when the Menu bar is hidden. Right-click the Menu bar and de-select the Menu bar item by clicking on it.

Acrord32(acrobat reader) loads up for no reason when i use firefox 4.

(4-15-11)
i just started using firefox 4(new release) two days ago, i noticed it started to hang and freeze up, so i open up my windows task manager and saw that 2 files was running "AcroRd32.exe"(acrobat reader) , i'm using the most updated version of adobe, the older version of firefox "3.6.16" did not do this. The question is how do i stop "AcroRd32.exe" from starting up for no reason when i use firefox ?. i do not go to sites that have PDF's in them

IE uses a different version of Flash (ActiveX) than other browsers use (Plugin version), you need to install the correct version of Flash for Firefox.

I'm applying for jobs online through my iPad using the safari app. For some reason when I try to attach my resume, which I have saved in Pages, it does not give me an option to go to Pages. It only gives my an option to choose a file from photos. Does it

I’m applying for jobs online through my iPad using the safari app. For
some reason when I try to attach my resume, which I have saved in
Pages, it does not give me an option to go to Pages. It only gives
my an option to choose a file from photos. Does it not have the
capability to choose a location other than photos??

No. Safari does not have the option to attach files for uploading other than photos.
Look at iCab Mobile in the App Store. There are other browsers that may do this, but I'm pretty sure that iCab will fill the need.
iCab Mobile (Web Browser) on the App Store on iTunes
take a look at this.
http://www.icab-mobile.de/faq.html

DB_GET_BOTH_RANGE fails when there is only one record for a key

Using the DB_GET_BOTH_RANGE flag doesn't seem to work when there is a
single record for a key.
Here's a sample Python program that illustrates the problem. If you
don't know Python, then consider this to be pseudo code. :)
from bsddb3 import db
import os
env = db.DBEnv()
os.mkdir('t')
env.open('t',
db.DB_INIT_LOCK | db.DB_INIT_LOG | db.DB_INIT_MPOOL |
db.DB_INIT_TXN | db.DB_RECOVER | db.DB_THREAD |
db.DB_CREATE | db.DB_AUTO_COMMIT)
data = db.DB(env)
data.set_flags(db.DB_DUPSORT)
data.open('data', dbtype=db.DB_HASH,
flags=(db.DB_CREATE | db.DB_THREAD | db.DB_AUTO_COMMIT |
db.DB_MULTIVERSION),
txn = env.txn_begin()
#data.put('0', '6ob 0 rev 6', txn)
data.put('0', '7ob 0 rev 7', txn)
#data.put('0', '8ob 0 rev 8', txn)
data.put('1', '9ob 1 rev 9', txn)
txn.commit()
cursor = data.cursor()
print cursor.get('0', '7', flags=db.DB_GET_BOTH_RANGE)
cursor.close()
data.close()
env.close()
This prints None, indicating that the record who's key is '0' and
who's data begins with '7' couldn't be found. If I uncomment wither of
the commented out puts, so that there is more than one record for the
key, then the get with DB_GET_BOTH_RANGE works.
Is this expected behavior? or a bug?

You can use the DB_SET flag which will look for an exact key match. If
you use it with the DB_MULTIPLE_KEY flag, it will return multiple keys
after the point it gets a match. If you can post here how all your
LIKE QUERIES look, I may be able to provide you with the suited
combination of the flags you can use for them.I'm not doing like queries. I'm using BDB as a back end for an object
database. In the object database, I keep multiple versions of object
records tagged by timestamp. The most common query is to get the
current (most recent version) for an object, but sometimes I want the
version for a specific timestamp or the latest version before some
timestamp.
I'm leveraging duplicate keys to implement a nested mapping:
{oid -> {timestamp -> data}}
I'm using a hash access method for mapping object ids to a collection
of time stamps and data. The mapping of timestamps to data is
implemented as duplicate records for the oid key, where each record is
an 8-byte inverse timestamp concatenated with the data. The inverse
timestamps are constructed in such a way that they sort
lexicographically in inverse chronological order. So there are
basically 3 kinds of query:
A. Get the most recent data for an object id.
B. Get the data for an object id and timestamp.
C. Get the most recent data for an object id who's timestamp is before
a given timestamp.
For query A, I can use DB->get.
For query B, I want to do a prefix match on the values. This can be
thought of as a like query: "like <inverse-time-stamp>%", but it can
also be modelled as a range search: "get the smallest record that is >=
a given inverse time stamp". Of course, after such a range search,
I'd have to check whether the inverse time stamp matches.
For query C, I really want to do a range search on the inverse time
stamp prefixes. This cannot be modelled as a like query.
I could model this instead as {oid+timestamp -> data}, but then I'd
have to use the btree access method, and I don't expect that to scale
as I'll have hundreds of millions of objects.
We tried using BDB as a back end for our database (ZODB) several years
ago and it didn't scale well. I think there were 2 reasons for
this. First, we used the btree access method for all of our
databases. Second, we used too many tables. This time, I'm hoping that
the hash access method and a leaner design will provide better
scalability. We'll see. :)
If you want to start
on a key partial match you should use the DB_SET_RANGE flag instead of
the DB_SET flag.I don't want to do a key partial match.
Indeed, with DB_GET_BOTH_RANGE you can do partial
matches in the duplicate data set and this should be used only if you
look for duplicate data sets.I can't know ahead of time whether there will be duplicates for an
object. So, that means I have to potentially do the query 2 ways,
which is quite inconvenient.
As you saw, the flags you can use with cursor.get are described in
detailed here.But it wasn't at all clear from the documentation that
DB_GET_BOTH_RANGE wouldn't work unless there were duplicates. As I
mentioned earlier, I think if this was documented more clearly and
especially of there was an example of how one would work around the
behavior, someone would figure out that behavior wasn't very useful.
What you should know is that the usual piece of
information after which the flags are accessing the records, is the
key. What I advice you is to look over Secondary indexes and Foreign
key indexes, as you may need them in implementing your queries.I don't see how secondary indexes help in this situation.
BDB is
used as the storage engine underneath RDBMS. In fact, BDB was the
first "generic data storage library" implemented underneath MySQL. As
such, BDB has API calls and access methods that can support any RDBMS
query. However, since BDB is just a storage engine, your application
has to provide the code that accesses the data store with an
appropriate sequence of steps that will implement the behavior that
you want.Yup.
Sometimes you may find it unsatisfying, but it may be more
efficient than you think.Sure, I just think the notion that DB_GET_BOTH_RANGE should fail if
the number of records for a key is 1 is rather silly. It's hard for me
to imagine that it would be less efficient to handle the non duplicate
case. It is certainly less efficient to handle this at the application
level, as I'm likely to have to implement this with multiple database
queries. Hopefully, BDB's cache will mitigate this.
Thanks again for digging into this.
Jim

When there will be an update for Fireworks CS6 Mountain Lion?

While editing a file with multiple frames, Adobe Fireworks CS6 quit unexpectedly.
My work was not saved by the 'recovered file' feature and I had been so immersed in editing the animation I was creating that I had probably not saved my work for the last 20 minutes or so. My arm is going to fall off from doing stuff over and over again ...not really, but it does waste my time.
Any word on when there will be an update for CS6 for Mountain Lion?
(I'm currently using 12.0.0.236)

This is not just a problem on Mountain Lion. Fireworks crashes for everyone.
I recommend turning on auto-save (Google how to do this) to save yourself from punching your screen.

I use Yahoo Calendar on my IPhone. For whatever reason when I go into my calendar I will see at the top of the screen that 5 or 6 "calendars" are being used and one of them is the one I called Dana_Gardner and is legitimate, the others are randomly named

I use Yahoo Calendar on my IPhone. For whatever reason when I go into my calendar I will see at the top of the screen that 5 or 6 "calendars" are being used and one of them is the one I called Dana_Gardner and is legitimate, the others are randomly named with letters and numbers. Why is the IPhone creating additional "calendars"? I only asked for one to be set-up. I don't understand, I have to go into the calendar settings daily and uncheck these un-asked for calendars. Help!

Mine is doing the same thing. I deleted the whole account from the mail settings and it got rid of most of the extra calendars. But there are still 2 gibberish ones left.

I am using Firefox 31.0 on MAC 10.9.4. Firefox crashes often and mainly when safari opens alongwith Firefox. This was happening with firefox 30.0 also. Help.

I am using Firefox 31.0 on MAC 10.9.4. Firefox crashes often and mainly when safari opens alongwith Firefox. This was happening with firefox 30.0 also. The version 28.0 is working fine but one of the site is not working under this version, the site works fine with safari but not Firefox 28.0 so updated to 31.0, now i can open the site but Firefox is crashing.Help.
I tried the steps mentioned below:
--reset firefox
--uninstalle completely and re-installed.
--disabled add-on.
--disable "use Hardware accleration".
--set value for cacheused under "about:config".
Same issue, please help.

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
 
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

I registered on icloud from my gmail and now when i log on icloud and type password its say your account is been blocked for security reasons.when i reset be email its just send on email but wich email i dont remember.i have @icloud email pls help

(https://iforgot.apple.com i registered on icloud from my gmail and now when i log on icloud and type password its say your account is been blocked for security reasons.when i reset be email its just send on email but wich email i dont remember.i have @icloud email pls help

drop the CAPS thats rude.
iforgot.apple.com there is a link for find my apple id click here
https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
Peace, Clyde

HT201412 my iphone just turn it off for no reason, when i turn it on after 2or3 min it just shutdown by it self, and even when i charge my iphone it works, but once i take it off then it shutdown again.

my iphone just turn it off for on reason, when i turn it on after 2or3 min it just shutdown by it self, and even when i charge my ipjone it works, but once i take off the charge then it shut down by it self again

Hello there, queen168.
The following Knowledge Base article provides some good steps for troubleshooting your particular issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps.

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.

Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.

Keynote and pages are now free, but why do i need to pay for them still when there now free?!?

keynote and pages are now free, but why do i need to pay for them still when there now free?!?

Users can obtain the iWorks and iLife applications free, if they purchased a Mac after the beginning of October 2013.
Older Mac purchases require a paid purchase of these applications.

For some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store.

for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.

It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
Set you phone up as a new device and start over.

I have an iPhone 4S and for some reason when I go to turn my wifi on sometimes it's greys out and Won't let me turn it on so what can I do to fix this ???

I have an iPhone 4S and for some reason when I go to turn my wifi on sometimes it's greys out and Won't let me turn it on so what can I do to fix this ???

If the steps in the article TJBUSMC1973 linked didn't resolve your issue, then the next step would be to have your phone serviced at an Apple store. Good luck

Firefox crashes for no reason when there is a tab open for MSN.

Similar Messages

Maybe you are looking for