Firefox crashes - I need some help becaue I cannot understand the cause of my constant crashes...

These are my last two crashes. I tried all that is commonly advised, but crashes are still frequent, about once or more every day.
bp-dd8c6382-a254-4f16-aaf8-257152140313
bp-98dc2419-5892-4cf8-89a7-ce3382140312
Thanks

hello mozi108, i'm locking this thread, because you already have created a similar question yesterday at https://support.mozilla.org/en-US/questions/989596. please put all new information about the crashing issue there instead of opening new questions for it, so that contributors can follow up on you more easily. thank you!

Similar Messages

  • Firefox crashes - I need some help because I cannot understand the cause of my constant crashes...

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/989596 /questions/989596]''
    AND AGAIN AND AGAIN...
    other two crashes in the last few minutes:
    bp-e23f3f47-df28-49aa-9117-870ee2140313
    bp-e656c64b-ddaa-4ca1-ab0a-2daea2140313

    hello mozi108, i'm locking this thread, because you already have created a similar question yesterday at https://support.mozilla.org/en-US/questions/989596. please put all new information about the crashing issue there instead of opening new questions for it, so that contributors can follow up on you more easily. thank you!

  • Need some help killing threads (not in the way already mentioned..)

    I have read the ways in which we should safely kill a thread - and for the most part i understand that. But my question is HOW to implement it in the way that I need.
    Basically I have a multithreaded (ewww) app that really is a large job scheduler running 24/7. It can run anywhere from 1 to 15 jobs at a given time. This is fine. What i need is to have the ability to 'kill' a job when I need to. When the app daemon decides its time to run a certain job (based on business logic) it kicks one off, which is a class I made that implements Runnable.
    public class SchedulerProcessThread extends SOQBase implements Runnable{}
    when its time to start a job i do the usual:
    SchedulerProcessThread spt = new SchedulerProcessThread(blah);
    Thread t = new Thread(spt, "fooname");
    t.start();
    Now, this comes to my problem of where/how to kill the job (if needed). A SchedulerProcessThread is linear and finite so it will always have a termination point - it never loops. And when one is kicked off - i do not have a reference to it anymore - I mean, I couldnt if i am constantly running new jobs, potentially hundreds every hour. And jobs can be started in various places in the app, depending upon whether others are already running, etc.
    I wish to implement the do-while (alive) logic on the job thread. So in the 'run()' method of my SPT class, I would like the:
    while (alive) {
    doProcessing();
    But how can i invoke a method on my class [SPT] so that it changes the alive var from true to false when i do not have a reference to it?
    As a side note, I have a command prompt on the app whereby i can call up all the running 'jobs' which is a list of the running threads under a threadgroup called 'soqjob' (all new Threads that are started with a passing param of and SPT object are under the 'soqjob' threadgroup). So now i can see all those 'soqjob' threads which are currently running Thread objects that have been passed new instances of an SPT class.
    Is there anyway i can grab the 'soqjob' thread of my choice and somehow access my SPT class that was originally passed to it in the Thread constructor? if so, then I could pass in the command to stop the do-while loop.
    Hmm - does any of this make sense? If i can sum up, the problem is i do not know how to access my own SPT class once I have passed it into a thread object and invoked that thread object's 'start()' method. if i can do that, then i can switch the ALIVE var from true to false and thereby kill the SPT job i need.
    Any ideas?
    Many thanks
    Ian

    I would add a Collection (synchronized) to the Scheduler that holds a reference to all the Processes. Pass a reference of the Scheduler to the Processes so that when a Process is done, it can remove itself from the Collection.
    public class Scheduler {
         private Collection threads;
         public void addProcess() {
              Runnable runnable = new ProcessThread(this);
              Thread thread = new Thread(runnable);
              thread.start();
              threads.add(thread);
         public void removeProcess(ProcessThread thread) {
              threads.remove(thread);
         private Thread getSelectedThread(Component c) {
              //Find Thread in Collection and return it
         private class Action implements ActionListener {
              public void actionPerformed(ActionEvent e) {
                   Thread thread = getSelectedThread(e.getSource());
                   thread.interrupt();
    class ProcessThread extends ... implements Runnable {
         private Scheduler scheduler;
         public ProcessThread(Scheduler s) {
              this.scheduler = s;
         public void run() {
              while (!Thread.interrupted()) {
                   try {
                        doProcessing();
                        Thread.yield();     //Give the other Threads a chance to do some work
                   } catch (InterruptedException e) {
                        Thread.currentThread().interrupt();
              this.scheduler.removeProcess(this);     //Remove this Thread from the Scheduler's Collection
    }Did you consider using the classes java.util.Timer and java.util.TimerTask?

  • I need some help with Audigy 4( not the pro, just audigy 4) before I

    okay, I got to downloads, and go to audigy 4 series, and find there is only audigy 4 pro, there not the regular, so my question is, do I use the audigy 4 pro drivers, or am I out of luck, because I am running x64, otherwise I'd get an x-fi card, but need a quick fix, bro's sound went and told him he could have my card, but need to know this before I buy, otherwise, I may just get the audigy 2 value or zs...anyone that can help plz do?

    Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

  • I need some help taking my site over the top.

    Ok, i built the site for a small business and i believe it looks better than most sites in the industry. How do i get it noticed in searches and take it over the top and make it look like it was done by a professional. How do i increase the search hits. Has a cottage industry spawned with people who do this in IWEB. i want to maintain control of the site.
    Your thoughts and direction
    john

    Rugbyjoey wrote:
    How do i get it noticed in searches...
    John ~ This article may help:
    _How to get your iWeb Websites into Google & Other Major Search Engines_
    Rugbyjoey wrote:
    ...and make it look like it was done by a professional.
    “Do only what is necessary to convey what is essential. Carefully eliminate elements that distract from the essential whole, elements that obstruct and obscure....Clutter, bulk, and erudition confuse perception and stifle comprehension, whereas simplicity allows clear and direct attention." — Richard Powell, in his book +Wabi Sabi Simple+.
    "One of the biggest mistakes typical business people make with documents is going out of their way to seemingly use every centimeter of space on a page, filling it up with text, boxes, clip art, charts, footers, etc. Space, often called "white space," is good. Embrace it. Use it. Often, the more space you don't use on a page, the clearer your message becomes.
    Empty space is beautiful, yes. But empty space also implies importance, elegance, professionalism. This is true with graphic design, but you can see the importance of space (both visual and physical) in the context of interior design. Think of the retail space, for example. Target is dedicated to design although they are a discounter. They know about space. Target stores are well designed. They have more empty space than other discounters, Walmart, for example."
    ...Understanding such basic points on graphic design will help set you apart. You can read more design tips in this Presentation Zen article:

  • Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server.  This just started happening.  When I open a file indesigns is creating a textfile in the same folder?  I need some help on this.

    Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server.  This just started happening.  When I open a file indesigns is creating a textfile in the same folder?  I need some help on this.

    Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
    Mylenium

  • Need some help with pictures

    Hi,
    I need some help to try to understand some of my issues; i'm creating a catalogue for a company and i'm uploading TIFFs pictures (600 of them). My problem is that this catalogue is both for print and web but is getting really heavy as a file, is there another way to convert all the pictures and maintain the quality for print and a reasonable size for web?
    I'm uploading TIFFs because i need the transparency and i can't upload as PNG...
    Can someone help me please.
    I really appreciate

    alanpires wrote:
    ...  this catalogue is both for print and web ...
    Choose either file size (for web) or image quality (for print). Something has to give.
    This "for web" business, is that still a PDF? Then export for print with full resolution, and export another version to put online where yo adjust the export settings for the web until image quality is worse than having a megabyte or two more.

  • Need some help and guidance please!

    Hi everyone,
    I desperately need some help because I am at my wits end.   In September I purchased a Compaq Presario CQ60-450US.  Shortly after purchasing, I fresh installed Windows 7 Professional.  Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error.  I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.  
    I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie.  He/she said that she could see no issue.  (no diagnostic was run)I informed the individual that I had issues with buring as well.  He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
    I called HP support back and told them that I am having an issue now burning.  They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP.  I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP.  I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
    I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device.  The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor. 
    That is where I stand.  HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware.  I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support.   Can anyone point me to a reputable division that can help me with my issue?  I feel I was just thrown aside so that they don't have to initiate a repair.  If not has anyone filed a compalint against this outrageous support requirement?   

    Dear ndjumpball,
    I would like to say that I have some good -- or at least encouraging -- advice.  Regretfully, I do not.  I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school.  My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7.  Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit.  Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable.  I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
    I was all excited and happy now that I had a laptop for school that had everything I was looking for:  decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay.  Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too.  It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard.  Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment.  Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install.  In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you.  The following is a direct copy/paste quote from an email response I received from HP Total Care:  "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not.  If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
    After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology...  Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series.  (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
    A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working.  After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro.  After giving the guy my credit card number as security, I had a replacement drive shipped to me.
    My personal recommendation:  clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install.  Bottom line:  your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine.  You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
    I don't know if that helps or not, but thank you for giving me the opportunity to vent!  :-)

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • TS1702 I need some help the apps were downloading slowly

    The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
    The iOS 6 update didn't work.
    Please I need some help.
    The apps didn't download.
    Talking Angela and Ginger didn't download.
    Talking Santa didn't update.

    Try moving the existing backup file to a safe location so that iTunes has to create an entire new file.  The backup file is located here. You can delete that backup once you get a successfull backup.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.

  • Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

    Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

    thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess. 
    That would convenient, but sadly it is not the case. Sorry!
    Either way your welcome and best of luck!
    B-rock

  • Need some help in creating Search Help for standard screen/field

    I need some help in adding a search-help to a standard screen-field.
    Transaction Code - PP01,
    Plan Version - Current Plan (PLVAR = '01'),
    Object Type - Position ( OTYPE = 'S'),
    Click on Infotype Name - Object ( Infotype 1000) and Create.
    I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
    I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
    I specify again, I have to add a new search help to standard screen/field and not to enhance it.
    This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
    There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
    It's urgent.
    Thanks in advace. Suitable answers will be rewarded

    Hi Pradeep,
    Please have a look into the below site which might be useful
    Enhancing a Standard Search Help
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
    edc983384237
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
    A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
    This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
    A search help exit is called at certain timepoints in the input help process.
    Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
    Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
    During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
    If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
    timepoints
    The following timepoints are defined:
    1. SELONE
    Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
    Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
    The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
    2. PRESEL1
    After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
    3. PRESEL
    Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
    4. SELECT
    Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
    5. DISP
    Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
    6. RETURN (usually as return value for the next timepoint)
    The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
    It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
    7. RETTOP
    You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
    8. EXIT (only for return as next timepoint)
    The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
    9. CREATE
    The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
    The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
    10. APP1, APP2, APP3
    If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
    Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
    If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
    F4IF_SHLP_EXIT_EXAMPLE
    This module has been created as an example for the interface and design of Search help exits in Search help.
    All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
    A search help exit is called repeatedly in connection with several
    events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
    However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
    The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
    Hope this info will help you.
    ***Reward points if found useful
    Regards,
    Naresh

  • Need some help in debugging this exported script

    Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
    Forward engineering generated DDL script
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
    DROP TABLE [dbo].[Table1]
    GO
    CREATE TABLE [dbo].[Table1] (
    [test] CHAR(10) NOT NULL
    , [test2] CHAR(10) NULL
    GO
    ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
    [test]
    GO
    GO
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
    DROP TABLE [dbo].[Table2]
    GO
    CREATE TABLE [dbo].[Table2] (
    [test2] CHAR(10) NOT NULL
    GO
    ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
    [test2]
    GO
    GO
    ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
    [test2]
    REFERENCES [dbo].[Table2] (
    [test2]
    GO
    GO
    When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table1;
    END IF;
    END;
    CREATE TABLE Table1
    test CHAR(10) NOT NULL,
    test2 CHAR(10)
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table1_PK PRIMARY KEY( test );
    --SQLDEV:Following Line Not Recognized
    DECLARE
    v_temp NUMBER(1, 0) := 0;
    BEGIN
    BEGIN
    SELECT 1 INTO v_temp
    FROM DUAL
    WHERE EXISTS ( SELECT *
    FROM objects
    WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
    AND TYPE IN ( N'U' )
    EXCEPTION
    WHEN OTHERS THEN
    NULL;
    END;
    IF v_temp = 1 THEN
    TRUNCATE TABLE Table2;
    END IF;
    END;
    CREATE TABLE Table2
    test2 CHAR(10) NOT NULL
    ALTER TABLE Table2
    ADD
    CONSTRAINT Table2_PK PRIMARY KEY( test2 );
    --SQLDEV:Following Line Not Recognized
    ALTER TABLE Table1
    ADD
    CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
    --SQLDEV:Following Line Not Recognized
    ;

    Pl do not post duplicates - Need some help in debugging this script

  • Need some help in Los Angeles

    working on a music video that needs some help. I own Final Cut and Color. Done the edit and it looks great but it needs help polishing and I have no idea what to do. Planning on showing the video this friday night in hollywood and I want it to blow people away. Is there anyone in the area would be willing to help? Please contact me ASAP. Thanks Ray

    if you can give me a call that would be best, I can tell you what I need to accomplish. Thanks
    818 935 5079

  • Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0

    HI all,
    I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks  ...............
    Thanks in advance.............

    Hi,
    You need to confirm the downtime during the upgrade activity.
    Check for Space and resource allocation.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
    https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
    https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
    You need to make sure some OSS notes should be applied, check the below link for the same:
    https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
    http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
    Hope this helps...
    Rgs,
    Ravikanth.

Maybe you are looking for