Firefox crashes when I reopen it's window after having been on another window. It also hangs when click in it's window. Please help.
The crash report window didn't give me a signature but here's the crash report id:
7bdfbc7f-199f-4589-b558-271f52110531
I'm using Malwarebytes and it's removed all malware. I've been running it everyday ever since this problem started. I'm also using Kaspersky Internet Security 2011.
The problem started when I temporarily deactivated Kaspersky and ran the browser. When I reactivated Kaspersky the problem persisted. Malwarebytes picked up some malware after that and removed them. But still have problem. Please yelp.
Some of your crash reports weren’t sent to the Mozilla Servers.
In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in.
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''
Similar Messages
-
Firefox crashed last week and I've lost all my bookmarks, I've tried to recover them to no avail. Can you please help me? Many thanks
You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*https://support.mozilla.org/kb/Lost+Bookmarks -
Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?
Hi rmarchione,
Can you try restoring preferences and let us know if it helps?
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
Cirrus realitypod mac audio driver
MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
Realtek Drivers -
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
Eddie,
There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there. -
When I tap on Top 25 button for the app store I get a window that says "to many HTTP redirects" it also happens when I tap on the categories button
Restart your device
Reset All Settings (Settings > General > Reset)
Backup and Restore
Do all of those in order - although I almost guarantee you won't need to perform the last step.
Sounds like your phone is just getting a resource error. -
Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.
Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
Neill -
I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!!!!
Try this. It worked for me.
I discovered the same problem. I had an older version of Pages on my iPad. After updating it to the latest version all my previous documents created in pages for the iPad were rendered unreadable and a message stated that they were an invalid format. Why for the life of me would a program that was created by Apple and sense updated not be able to read previous versions...well that's a whole other sad story. Any way I discovered how to fix it but it would require that you had backup your iPad on a computer and not emptied your trash. If this sounds good than here is how you fix it... And it worked for me.
These steps will enable you to reinstall a previous version of the Pages app so you can be able to read and edit older documents.
FIRST: if you did backup your iPad using your computer and did not empty your trash, GOTO the trash and look for PAGES 1.4 (or other number) ipa ( that's the file extension) ie PAGES 1.4 ipa.
SECOND: move that file out of the trash and onto your desktop. Once you do this, double click on it and a box will come up stating a newer version has been found and do you want to revert back to older version. ANSWER YES. It will than automatically place and overwrite the older version back into the file on iTunes that contains the rest of your backed up apps.
THIRD: and this is where it is important that your backup would have to have been on your computer. I'm not sure if backup on the cloud will work. iCloud backup at your own risk And here's why. Before you restore you will need to remove the latest version of Pages off your iPad by doing the usual : holding down the home button until the apps wiggle and remove by pressing on X on app. Removing off your iPad will also delete all your documents but if you have a previous backup on your computer those documents will be stored safely on itunes and will return.
FORTH: plug your iPad into your computer and allow it to sync so iTunes will recognize it. Once iTunes is up and you can see that it recognizes your iPad, GOTO "FILE/DEVICES/RESTORE FROM BACKUP." ******* DO NOT CLICK ON BACKUP***** click on RESTORE FROM BACKUP. This will reinstall all previous settings and documents that were their when you backuped PLUS the older version of Pages that you placed back from the above steps. Let it run through all the setups ( this could take up to 20 minutes...depending on amount of data and photos and apps).
FIFTH: Once everything is reinstalled a message will popup on your computer stating "to leave iPad plugged in until iTunes recognizes it again" ( it's basically rebooting itself). Once done (leave iPad plugged in still) GOTO iPad and follow the steps. IMPORTANT: iPad will ask you if you want to SET IT UP AS A NEW IPAD, BACK UP FROM THE CLOUD or BACK UP FROM ITUNES.....press SET UP AS NEW IPAD. Follow all of the steps required. Once complete GOTO iTunes on computer, look for "IPAD" plus a little arrow ( should be on upper right corner of iTunes window, click on it ( this will safely disconnect your iPad from iTunes) . Now unplug iPad from computer and go to your iPad and look for the older version of Pages. It should be there along with all your old documents ( readable and editable too).
Hope this helps. Good luck. -
i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....
I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine, -
The status bar is pushed up at about 3/4 of the screen, so I can view only Firefox at about 1/4, good thing there is a scroll bar, but below the status bar is white display? can u please help me, I want to drag down the status bar so I can have a full view
== This happened ==
Every time Firefox openedYour code is absolutely unreadable - even if someone was willing to
help, it's simply impossible. I do give you a few tips, though: If you
understand your code (i.e. if it really is YOUR code), you should be
able to realize that your minimum and maximum never get set (thus they
are both 0) and your exam 3 is set with the wrong value. SEE where
those should get set and figure out why they're not. Chances are you
are doing something to them that makes one 'if' fail or you just
erroneously assign a wrong variable! -
HEY GUYS I AM USING AN IPHONE 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
PLEASE HELP ME.This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.
-
How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.
Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg -
My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.
-
I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you
Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.
Maybe you are looking for
-
How can I run a script on suspend/resume?
I'd like to run a script when a machine is about to suspend and another after it resumes. Is this possible?
-
Date time in the transaction access log of ST03N
Hi, How do I get date time in the log of transaction access by user. in transaction ST03N Pls let me know if any other transaction is available there I can get transaction access logs userwise. Points will be rewarded. Thanks
-
Unpaid Leave Configuration in Oracle HRMS
Hi Champs, I have requirement to configure Unpaid Leave. We want to follow the approach where one recurring standard link element will be attached to all the employees to check if leave is existing or not. If leave is existing then all the deductions
-
Automatic output of method parameters
Hi, Sometimes I find myself System.out'ing all parameters of a method. Is there a one-step way to do this? A one-liner that will output all method parameters (using reflection I guess) of the method the code is running in. for e.g public Car makeCar(
-
Date Node - Trailng 'z' in date field?
Hi, In an Orchestration I write a date value to a node via a distinguished field. For example: MyMsg.MyfDate = System.DateTime.ParseExact(strMyDate, "yyyy-MM-dd", Syst