Firefox does not deal with australian currency accurately. For example $5000 comes out as AUD 4850 or something similar

I have copied these SAME account lines from the 2 browsers
Internet Explorer VIEW OF THIS TRANSACTION<br />
Practice Account
BSB 112-879 Acc 028 725 xxx $179.41 Available balance: $179.41
FIREFOX VIEW
Practice Account
BSB 112-879 Acc 028 725 xxx AUD172 Available balance: AUD172

You're welcome

Similar Messages

  • Firefox does not work with yahoo mail, why ???

    for some reason firefox does not work with the new Email window on yahoo.com All the other browsers work with yahoo mail just fine!! Are you working on a fix???

    ''ralphieboy [[#question-1022015|said]]''
    <blockquote>
    for some reason firefox does not work with the new Email window on yahoo.com All the other browsers work with yahoo mail just fine!! Are you working on a fix???
    </blockquote>
    I have had the problem of Yahoo! mail freezing (my computer freezing) with Firefox right after I boot up my computer and sign into my Yahoo! mail account. I have to either shut down my computer or use Control + Alt and press Delete to eventually bring up the Task Manager option. Then, once the choice for Task Manager comes up, I can click on cancel and Yahoo! mail and my computer have "un-frozen." I have followed all the recommendations for updating Firefox, clearing caches, checking if an Add-On is the problem, etc., as well as all the recommendations on Yahoo! help pages. Nothing has improved the situation to date. Firefox info says the problem is with Yahoo! Yahoo! says it is a browser problem. I just want the problem to be fixed.

  • Task does not run with transaction currency

    Dear All,
    When i am executing IU AR/AP elimination, I am getting error " Task does not run with transaction currency ("per TC" option reset) "
    Message no. UCF5104
    Diagnosis
    The present task is configured so that no values are analyzed in transaction currency. However, the option "per transaction currency" is selected in the method definition. This only makes sense if you also want to analyze the values in transaction currency.
    System response
    The task is being executed without the option "per transaction currency".
    Please advise me how to resolve the issue.
    Regards,
    Malani

    Dear Dan,
    I would like to know what will be the effect  if we remove o-Per Currency option in Method.
    I would like to know, in the document also in properties tab - in Key figures - Check box - Transaction Currency. If i select the warning message not coming. So kindly let me know what exactly check box -Transaction currency is used in Document type and whether it is interlinked with Method.
    Thanks
    Malani

  • ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?

    iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?
    Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

    Thanks for the suggestion kcell. I've tried both versions
    9.0.115 and 9.0.124 and both fail with the policy permission error.
    I also tried with and without your crossdomain.xml file but
    with the same result. It looks like this file is intended for URL
    policy, instead of socket policy. Recently Adobe separated the two.
    When I run with the files installed on my dev PC, it does
    work, which makes sense because the flash player isn't loaded from
    an unknown domain.
    I did get one step closer. If a crossdomain.xml in the server
    root exists and the socketpolicy file is loaded from the app folder
    then the first two warnings disappear. The logs now show:
    OK: Root-level SWF loaded:
    https://192.168.2.5/trunk/myapp.swf
    OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
    OK: Policy file accepted:
    https://192.168.2.5/trunk/socketpolicy.xml
    Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
    seconds) while waiting for socket policy file. This should not
    cause any problems, but see
    http://www.adobe.com/go/strict_policy_files
    for an explanation.
    Warning: [strict] Ignoring policy file with incorrect syntax:
    xmlsocket://192.168.2.5:993
    Error: Request for resource at xmlsocket://192.168.2.5:993 by
    requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
    lack of policy file permissions.
    Which basically says, everything is okay, but you stay out
    anyway.
    PS: I found the XML schema files here:
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
    and the socket policy schema:
    http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
    UPDATE: When serving up the policy file on port 843 using the
    example perl script then the socket connection seems to be accepted
    and the connect succeeds. After that flex hangs trying to logon to
    the IMAP server.

  • How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

    How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
    == URL of affected sites ==
    https://storefront.kenexa.com/lithia/cc/Home.ss

    There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
    The menu item name changes to the browser UA you are presently using.
    There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
    See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
    You can just start trying IE versions (or the versions it says on the site) until it lets you in.

  • Facebook says that firefox does not re cognize other web sites for tagged photos.

    I have firefox and when I get on facebook and use my profile to view photos that I have been tagged in. they do not show up. all comments show, but when I click on view photo, it tells me that firefox does not recognize other web sites and wants me to approve them. this has never happened to me till I updated to this fire fox.

    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images, the permissions.default.images pref should be 1.<br />
    See:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

    I'm using two displays and several desktops on my Mac (OS X 10.9.4).
    When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

    Hi Nerva,
    Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
    However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
    Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

  • Firefox does not work with the USPS self ship web site. Will not allow printing of postage labels.

    Some months ago, user "junkbondman" asked this question somewhat poorly, and partly as a result got a non-responsive boilerplate answer by someone who did not read the question's key (if cryptic) point:
    > Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
    That's too bad, because 16 other users identified "HAVE SAME PROBLEM" - as had, no doubt, a large majority of the 677 viewers of the question. However, maybe to get a better answer we need to start with a better definition of the problem.
    The way that the USPS site <cns.usps.com> works to print a label is that addresses (return and forward) are defined, the package weight and value are specified, and then a shipping mode is selected before paying and printing the label. The shipping mode is selected in a section titled "Select a service type", via an embedded table using a vertical scroll-bar that Firefox cannot handle. [Firefox is not alone in that. For example, Safari under iOS cannot scroll the embedded table, but USPS provides a mobile app which mitigates that problem by presenting the table differently.]
    Now, it should be stipulated that the table is the worst element in a bad page that does not begin to pass W3 validation [71 errors, 19 warnings - looks like government work]. However, other browsers (like Google Chrome) handle that table with apparent ease. The question is whether Firefox should be able to do so - and, if so, how? As of Fx 33.0, this still does not work.
    NOTES:
    (1) Unfortunately, to examine this problem requires setting up a USPS account in order to see the shipping page. Setting up the account is easy, but it is a small extra burden to examining the problem.
    (2) The problem has been reported to USPS, but has elicited no sign of intelligent life.

    ''I get the "pointer" mouse cursor when mousing over the blue bar, and I can click on it and scroll the contents as with any other scroll bar, but the bar doesn't move up and down in sync with the content being scrolled: it just stays put. If I do not slide straight down, the blue bar may twitch a pixel left or right.''
    Great description! - sorry if you implied that earlier and I misunderstood, but I think that description adds crucial details:
    * must hover over the ''blue'' part of the bar (representing the visible part of the table) and
    * get the "selector" cursor (the pointing finger), then
    * hold that click while scrolling (inside or outside of the table doesn't matter, as long as that click is held) to the needed table row, then
    * release the click, and the table stays in place to allow a selection.
    Most pages with an embedded scrollable input form (like the box I'm typing in on this page) do not change to the selector cursor when hovering over ''any'' part of the scroll bar, either ''blue'' (representing the visible part of the input form) or ''white'' (the invisible part of the input form). And it is common to click in the ''white'' part of the bar as a way of saying "show what is not visible". You can't do that with these USPS input forms, which behave differently.
    Now, even with this method, that remains a very unintuitive (because the scroll bar does not reflect the position, and because the actual ''selections'' never get the "selector" cursor) and awkward way to work, so there is no visual feedback on either part of the operation.
    And, I must try to understand why some browsers treat this differently. For example with Chrome (like Firefox), the cursor changes to "selector" in the blue part of the scroll bar, but not in the white part, but with Chrome (unlike Firefox):
    - a ''click'' in the white ("invisible") part of the scroll bar or
    - a ''drag'' on the blue ("visible") part of the scroll bar
    causes movement in the required direction - altogether more intuitive behavior.
    Bottom line: At least there is a way to make this work with Firefox, but it is awkward, to say the least. It will require a lot more thought to think about:
    * how and why some browsers handle these non-standard input forms with such intuitive behavior (that is, behavior that is familiar in more standard input forms),
    * whether the fact that Firefox is less accommodating in that regard is a reportable bug, or whether Firefox should not have to worry about sites (like usps.com) that can't be bothered to comply with standards.
    What do you think about those questions?

  • Firefox does not work with pasting on Excel

    I keep excel spreadsheet at Veranda 9 or 10. Recently when I would go to different web pages and try to copy a value and paste it, it is pasted as Calibri (body) 12. At first I thought that there was something wrong with Excel, even though I knew that I did not do anything. Then I realized that I started noticing it when Firefox was upgraded to 11 (and now to 12), same time when I could not open a pdf file - but was greatly helped here.
    A solution here did not help, perhaps because I am using a Mac. I have no idea where the skype click it to disable it.

    Does Excel on Mac have Edit > Paste Special? If so, what format is highlighted as the default format in the Paste Special dialog? It could be that Firefox has changed the formats placed on the clipboard. Perhaps someone can compare Firefox 10 and see what formats are listed for that version.

  • FAGLGVTR carry forward does not work with hard currency

    I have a problem with carry forward with hard currency.
    I m running transaction FAGLGVTR when I click on to see the balance balance shhet accounts it only shows me balance in transaction currency and local currency but show me 0 (zero) in column of hard currency.
    My configuration:
    Define Ledgers for General Ledger Accounting is 0L --- FAGLFLEXT
    Define Currencies of Leading Ledger --- I have two currency
    But the problem is that displays zero in hard currency and not drag balance

    The note  963259, if partially solves the problem, but now in some accounts no carry forward in the new year.
    The problema ocurr in account defined in Trx FS00 with "account currency = hard currency". The other account not have that problem.
    I appreciate your cooperation
    Thanks
    Oscar

  • Firefox does not open with App Tags created in the previous session.

    If I define an app tag, close Firefox and open Firefox, the app tag does not exist.

    I had this problem as well, but was able to solve it using this procedure:
    - Close firefox from the menu (don't use the 'x' as firefox may continue to run in memory for a while)
    - in your start menu, enter the following into the "run" prompt: firefox.exe -P
    - The firefox profile manager will open (see attached image)
    - In my case I deleted the "default" profile because I didn't care about losing any settings. You may want to simply create a new profile instead in case you need to save your settings.
    - To avoid being asked about which profile to be used you can highlight your new profile and then make sure the "Don't ask at startup" checkbox. When ready, press the "Start Firefox" button.
    - Voila! That fixed it for me. Like I said, I just created a new "default" profile and everyone worked fine for me; use your own judgement here.
    Good luck!

  • Firefox does not work with the USPS self ship web site. Will not allow printing of postage lables. Please fix.

    after I input all information, the select a service section does not operate properly and I cannot print a shipping lable.
    Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
    Choose a Service Type
    Package Type Scheduled Delivery Shipping Price
    Enter package details to view service options.

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Firefox does not open with my home page

    Whatever settings I use (eg Options>Options>General>Show my Home Page), Firefox opens with the page(s) from my last session. I'd quite like my home page back!

    I had this problem as well, but was able to solve it using this procedure:
    - Close firefox from the menu (don't use the 'x' as firefox may continue to run in memory for a while)
    - in your start menu, enter the following into the "run" prompt: firefox.exe -P
    - The firefox profile manager will open (see attached image)
    - In my case I deleted the "default" profile because I didn't care about losing any settings. You may want to simply create a new profile instead in case you need to save your settings.
    - To avoid being asked about which profile to be used you can highlight your new profile and then make sure the "Don't ask at startup" checkbox. When ready, press the "Start Firefox" button.
    - Voila! That fixed it for me. Like I said, I just created a new "default" profile and everyone worked fine for me; use your own judgement here.
    Good luck!

  • Firefox does not recognize my finger print reader for passwords

    My lap top has a finger print reader into which I code all my passwords. When I use Explorer my finger print reader works fine, but when I use Firefox as my browser the finger print reader does not work

    I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

Maybe you are looking for