Firefox does not recognize my finger print reader for passwords

My lap top has a finger print reader into which I code all my passwords. When I use Explorer my finger print reader works fine, but when I use Firefox as my browser the finger print reader does not work

I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

Similar Messages

  • After updating to the ladtest OS my iPhone most time goes blank when I unlock it and does not recognize my finger print not show the passcode to enter. Screen just brightens up and stays blank.

    after updating to the latest operating system on my iPhone 5s, often my screen goes blank and I am unable to unlock my phone. The phone becomes completely non responsive . Since I have the soft touch home button enabled I will either call Siri and ask to open an app which solves the issue or if I don't have Internet then the only solution is to switch off and then switd

    Hello there, Prashanthds96.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with an iPhone not turning on:
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Firefox does not recognize SSL Certificate issuer Entrust Certification Authority – L1K, but Entrust Certification Authority – L1C is ok?

    We have a new Entrust SSL Certificate with issuer Entrust Certification Authority – L1K which Firefox does not recognize. Internet Explorer and Chrome are ok.
    On a different system we have an Entrust SSL Certificate with issuer Entrust Certification Authority – L1C which is ok with Firefox.

    Did you verify that all intermediate certificates are installed on the server?
    You can inspect the certificate chain via a site like this:
    *http://www.networking4all.com/en/support/tools/site+check/
    *https://www.ssllabs.com/ssltest/

  • I installed to Java 7 Update 13 64 bit today but firefox does not recognize

    I installed to Java 7 Update 13 64 bit today but firefox does not recognize it. I have removed all older versions of Java from my Windows 7 64 bit Laptop.

    Install the 32bit version. FF is a 32bit application even on a 64bit platform.

  • Westell 327W gateway does not recognize Brother network printer

    The Westell 327W gateway does not recognize Brother network printer model MFC-490CW.  Any idea?

    I took a look at the Brother www site and would recommend the following:
    Temporarily Connect the Printer to the Network with an Ethernet Cable
    Run the Brother Installer Application to reconfigure the printer for Wireless (CD That Came w/ Printer)
    You will need the Network Name (SSID) and Passcode (WEP Key) from your Router.
    Once configured you will be able to disconenct the Ethernet Cable and use it wireless.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
    If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

    Hi to All,
    Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

    Hi MartinR
    Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
    Perhaps it is a setting in Final Cut Express?
    After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
    In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
    Any ideas?

  • Care button and finger print reader for 3000 N200 not working

    I have bought Lenovo 3000 N200 model. THe Care button and finger print reader not working. I have loaded the hot key driver as well as finger print reader driver. I have XP OS on my notebook. The software for finger print reader for XP (64 bit) which is there in the lenovo site is not getting loaded.
    Kinldly help.

    Hi @Sean-Ireland
    Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My finger print reader for dv6-3025dx is not working: can i fix it by redownloading the software?

    I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

    I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

  • Facebook says that firefox does not re cognize other web sites for tagged photos.

    I have firefox and when I get on facebook and use my profile to view photos that I have been tagged in. they do not show up. all comments show, but when I click on view photo, it tells me that firefox does not recognize other web sites and wants me to approve them. this has never happened to me till I updated to this fire fox.

    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images, the permissions.default.images pref should be 1.<br />
    See:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I bought Adobe Acrobat Pro XI but installing software does not recognize Acrobat 7.0 Pro for upgrade

    I bought Adobe Acrobat Pro XI but installing software does not recognize Acrobat 7.0 Pro for upgrade

    That's correct.
    Acrobat 8 is the earliest version from which you can upgrade to Acrobat XI
    http://www.adobe.com/products/acrobatpro/buying-guide-upgrade-pricing.html
    Unfortunately, Acrobat 7 is not eligible.

  • Light Room 4 does not recognize my Raw Images (NEF) for my nikon D810.  Is there a fix to this problem?

    Light Room 4 does not recognize my Raw Images (NEF) for my Nikon D810.  How do I correct this issue so that I can import NEF files into lightroom 4

    The D810 requires Lightroom 5.6 or newer. There is no way to import the NEF files into Lightroom 4. You can download the latest DNG converter and use it to create DNG copies that can be opened with Lightroom 4. Or, you can upgrade to Lightroom 5.

  • Os10.8 does not recognize hp 4000 printer

    My iMac with OS 10.8.4 does not recognize my HP LaserJet 4000tn on my ethernet network.  I have downloaded Apple's latest version of HP printer drivers 2.14. Have been on the phone with tech support-not helpful.  Have tried to connect with USB cable...no diffence.  Entered the IP address and found the printer on the pull down but received the message "Unable to verify the printer on your network."  I would really like to continue to use this printer with my new computer.  Is there a solution?

    Just to add more detailed info on hooking it up via Ethernet. This is for a 5000N, so the finding and printing out the IP address of the printer may be a bit different, but otherwise should work the same.
    1) At the printer. Press the Menu button to the right once so the display reads, "Information Menu". Press the Item button twice to the right so the display reads, "Print Configuration". Press the Select button. The printer will kick out two sheets. On the first page under the "Printer Information" heading is the IP address for your printer. It's the second entry from the bottom labeled, "HP JetSend Address: ip: 192.168.5.6 (your actual address will of course be different).
    2) In the "Print & Fax" heading of the System Preferences, remove any entries for the 5000. Click the Add button and then the IP button. Under the Protocol pull down menu, choose "HP Jet Direct - Socket". Under "Address:", enter the IP address on your printout, like my example of 192.168.5.6. Under "Name:", put in something meaningful, like "HP LaserJet 5000N". Assuming you have the PPD installed, then under "Print Using:' choose "HP LaserJet 5000 Series". Click the Add button.

  • When I try to click on a download link for a .pdf file Firefox does not recognize the MIME type and tries to download the file as "index.php"

    When visiting a site I frequent I tried to download a linked .pdf file. Previously I've used Firefox 7.0.1 to download the link with no problem. Using Firefox 8 however I the browser does not recognize the .pdf link's mime type. Instead of recognizing the download link as a .pdf file Firefox 8 tries to download it as "index.php". Firefox 8 does this with .doc files and .txt files as well. When I downgrade to 7.0.1 again the problem disappears.

    Hi hakmacpace,
    I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
    Hopefully this helps!

  • Windows server 2012 R2 does not recognize DVD burner as read/write device

    I've seen problem fixes for this on Windows 7 but nothing on 2012 R2.
    I changed the drive letter on the server (2012 R2 with all current updates) and now it does not recognize the working DVD burner as a read/write device.
    The device does work correctly with other Operating Systems on the same hardware.  The box is a Lenovo D30.
    Any idea as to how to go about this fix.  All Microsoft troubleshooter downloads run and say the problem was corrected but no luck in burning anything.

    Hi,
    Did you run this?
    http://support.microsoft.com/mats/cd_dvd_drive_problems
    Regards.
    Vivian Wang

  • After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

    I'm using two displays and several desktops on my Mac (OS X 10.9.4).
    When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

    Hi Nerva,
    Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
    However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
    Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

Maybe you are looking for