Firefox doesnt work when LAN cable connected but does with wireless

When connected to the LAN (provided by a cable company) I get server not found messages but woeks okay when using a wireless connection. I have cleared recent history = cache and cookies, rest proxy server to no proxy and put firefox.exe into my firewall exceptions and still no go. I am borrowing the wireless connection, my connection is through the cable.
== This happened ==
Every time Firefox opened
== within the last 24 hours

Hello.
When using a LAN cable, can you connect to the internet using other software (such as download managers, other browsers, IM clients, update software...)?

Similar Messages

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

HDMI to DVI adapter not allowing full resolution when using Mac OS but does with Windows 8.1

I have a Mac Mini and using the HDMI to DVI cable that came with the computer the maximum resolution it will allow is 1280 x 1024. I have 2 of the same monitors. The other is connected with DisplayPort to VGA adapater and displays full resolution (1920 x 1080) on both monitors but the HDMI to DIV will only show 1280 x 1024. I thought maybe it was my DVI cable or the adapter but when I boot up in Windows 8.1 through bootcamp both monitors display at full 1920 x 1080 resolution. Why does Windows give me the option for full resolution on both but the Mac OS doesn't? All the latest updates have been installed. I've contacted support and all the things they had me do didnt work. I see all these posts with people complaining about the same resolution issues. Is it that difficult for this to work?

Humm... the dual Samsung 21.5" monitor setup on my 2010 Mac Mini running Mavericks works a expected.One is on the HDMI to DVI adapter and the other in on a Kanex Mini DisplayPort to DVI adapter.
Try > Display Menu from the Mac App Store and see if you can select 1920 x 1080 for both monitors using it.
Addtitionally, are you sure that it the HDMI to DVI monitor that is not getting the correct resolution...? Most people are complaining that it is a VGA connected monitor that is not getting the correct resolution.
If it turns out to be VGA connected monitor, then try using a Mini DisplayPort to DVI adapter and DVI cable for that monitor instead of VGA.

Video playback from albums won't work when AV cable connected

I have created an Album on my iPhone 3G that has stills & video content. Previewing & playback on my phone works fine. However, when I playback the album hooked up with an Apple Composite AV cable, everything plays fine until it gets to the video where it just gives a black screen with the audio only playing. If I play the individual clip from iTunes on my phone, it plays back perfectly over the AV cable. Has anyone had any success playing back video in an Album over an Apple AV cable? Is it because I'm using an older model phone? Any help would be appreciated.

Are you sure it is not plugged into an Ethernet port on the back by mistake? That would present a 150 ohm short circuit. The sockets are very similar, and some Ethernet sockets will take a phone cable as well.
I am surprised that a Freesat box needs a phone line, unless its for some form of remote control.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Feature setting Masterpage & CSS doesn't work when included in SiteTemplate - but does work when activated manually

Hi,
I'm experiencing a strange behaviour recently. I wrote a feature with an EventReceiver that sets the masterpage and alternate css file for the current spweb it is activated for. When I activate that feature manually it works like expected. But if I include
the same feature in a SiteTemplate and it is called during site-creation, it doesn't work. I debugged it and stepped through it. As far as I can tell everything looks right. It sets the masterpage and css file like it should and throws no error. But when the
site loads in the end, it suddenly still uses the v4.master and no alternateCSS. How can that be?
If I deactivate the feature then manually and activate it again, it works...
Here's the feature:
const string masterPage = MyOfficeProcess.master";
const string searchMasterPage = "MyMinimal.master";
const string alternateCss = "MyOfficeAlternateProcess.css";
public override void FeatureActivated(SPFeatureReceiverProperties properties)
SPWeb web = (SPWeb)properties.Feature.Parent;
using (SPWeb topLevelSite = web.Site.RootWeb)
string relativePath = topLevelSite.ServerRelativeUrl;
if (!relativePath.EndsWith("/"))
relativePath += "/";
if (web.WebTemplate == "SRCHCENTERLITE" || web.WebTemplate == "SRCHCEN" || web.WebTemplate == "SRCHCENTERFAST")
web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + searchMasterPage;
else
web.MasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
web.CustomMasterUrl = relativePath + "_catalogs/masterpage/" + masterPage;
web.AlternateCssUrl = relativePath + "Style Library/My/" + alternateCss;
web.UIVersion = 4;
web.Update();

Hi,
You can put a copy of your master page within the template site, use that for the site's master page, and then save the site as a template then check whether it works.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/30699/featureactivated-not-called-for-site-template
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Firefox only works when i open a website starting with https

i did an update yesterday to firefox 8. Since i have it, i can only website starting with https. All other websites starting with http don't work. How can i fix this problem?
Thanks

Hello Susanne.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

My time capsule doesnt work when its conneted direct cable modem, and it start working from netgear router

I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.

What model is the modem? Is it a pure cable modem or a combined modem router?
This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
The TC must be in dhcp and nat mode.
Please factory reset the TC and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
By default the TC is in router mode after a reset.
Restart the modem.
The power up the TC and run through the setup utility.
The TC should then be accepted as the main router in the network.
If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight).

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

HT201210 my ipod doesnt work the sign of connect to itunes but it doesnt restore it

my ipod doesnt work the sign of connect to itunes but it doesnt restore it

What happens when you tru to restore the iPod via iTunes? Error message?

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

HT1766 hi, i just tried backing up my iphone on icloud but th option to 'Back Up Now" doesnt work. when i tap on it, nothing happens. Im worried because my iPhone has never been backed up before

hi, i just tried backing up my iphone on icloud but th option to 'Back Up Now" doesnt work. when i tap on it, nothing happens. Im worried because my iPhone has never been backed up before. Please help

Reset the phone then try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

Did you try to connect in recovery mode, as explained in this article?
If you can't update or restore your iOS device
If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
iPhone - Contact Support - Apple Support

Can the time capsule works without WLAN cable connected to my DSL router?

Cna the Time capsule work without WLAN cable connection to DSL router?

WLAN is usually used for wireless LAN .. plainly you mean WAN port ..
How do you expect to get internet if the TC is not connected to the internet?
The TC can work stand alone.. true enough but that will then involve considerable issues in setting up two different IP addressing regimes .. you can just bridge the TC and use it as WAP and switch plus hdd without having to route.

Firefox doesnt work when LAN cable connected but does with wireless

Similar Messages

Maybe you are looking for