Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.

Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.

Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.

Similar Messages

  • Hi, my macbook pro heats up immensely every time it wakes up from sleep mode..

    I own a early 2011 edition of MBP, with 2.3 Ghz i5 processor and 4 GB ram.. Everytime it wakes up from the sleep mode, it heats up with the internal fans constantly on.. Moreover, the estimated battery life shows as 2 hours even when the percentage is 97%.. However, when I restart the MBP, the heating stops and the battery life shows 5 hours.. Can someone please help me with this?

    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Hope this helps.

  • Sometimes when I open my laptop back from sleep, I get a black screen with the cursor showing.

    Recently I've been getting this weird problem where my macbook air will show a black screen with only the cursor visible that I can move around but nothing else can be done to get to the desktop. The only way is to close the lid and wait for around 10 or more seconds and then open the lid again to bring the laptop back from sleep and hope that the laptop goes to the lock screen and then to the desktop. This works often but sometimes the only solution seems to be to restart the laptop. This also happens when I tilt the lid to the point where it is almost closed and when I tilt it back the screen presents the above state. Theis has been happening often now and it is almost impossible for the above not to happen atleast 2 to 3 times a day. iThis is a relatively new problem that has been occuring since the past two weeks or so and never happened to me on my Macbook Pro 15 2011. My current system is a Macbook Air 11" 2013 Haswell 1.3 Ghz 4GB RAM 256 GB SSD. Now I dont want to have to send in my laptop if I dont have to if there is a way I can solve this myself. Anybody else have this problem?

    Hello tseten,
    I would be concerned too if my MacBook Air was not waking from sleep appropriately.  For an issue like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964http://support.apple.com/kb/ht3964
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    You can find the full article here:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I do not what to give Password every time it wakes up from sleep.

    I do not what to give the Password every time it5 wakes up from sleep.
    lechtmmgg

    >System Preferences>Security&Privacy>General
    Make changes here.

  • OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

    Hello,
    My config is OSX 10.9.1 new macbook pro 13 retina (2014).
    The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
    It was not the case before I bought the BT mouse.
    Is this problem between Wifi and bluetooth coming from the OS?
    Is there a fix already available or scheduled?
    Thanks

    Hello alexandrefromfrance
    Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
    After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
    Solution
    Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility.
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".

Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Restart your computer.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Regards,
    -Norm G.

  • When Cpu awakes from Sleep mode, sound doesn't w

    I am running Vista Ultimate 32bit and when awaking cpu from Sleep mode, seems like sound driver doesn't load. I was haveing the Blue screen but fixed that with updated video driver. I am running latest sound drivers and Vista is up to date. Is there a "hot fix"?Here are my specs... Q6600 G0Evga 680i A bios p3Evga 8800 Ultra 69.28W.D. 750gb sata2xGb Ocz 9200X-Fi FatalityCorsair 620hx psuAntec p82Logitech mx5000 keyboard&mouseLogitech z5500Samsung 242mp @ 920x200 60Hz?

    Hello hmnshgrwl,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
    Best of luck,
    Mario

  • Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP

    Problem to come back from sleep mode  in Lenovo Thinkpad T400 using Windows XP. Each time closing the T400 lid and try to make the laptop into a sleep mode for some time, it does not properly come out of sleep mode. Login screen is able to see when opening the lid for the first time, but it only seen for a while before then a black screen on T400 Thinkpad appears. Sometime the hard drive activity can be shown also. And then, to come back I had only one option to hard re-boot.
    I tried Fn+F4 and power button once to come back but no use.
    Please provide me some solution for this?
    Thanks in Advance.

    oh sorry and its been closed inbetween uses. When i open it the keyboard doesn't light up and it makes no sound.

  • Firefox crashes every time when i open it.

    Hello i recently noticed a firefox crash. I started it and it crashed. Now it happens to me every time when i start it. Please someone help me i tried to uninstall and then install , reseting but nothing works!? Also i have antivirus protection and it isn't caused by a virus. Here are my crash id's :
    bp-cd490cde-9227-4f1b-af49-d19e02131107
    bp-4d435826-25df-41d3-a707-24deb2131107
    bp-152b1bb7-0d84-41b6-aa87-ee1352131107
    bp-c7e61e2c-aa34-4693-90c4-8ddb62131107
    THANKS!

    We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
    #In that text field, enter %APPDATA% and press Enter. An explorer window should open.
    #From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
    #Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
    #Open the most recent 5 files with a text editor and copy the IDs.
    #Paste each ID with '''bp-''' into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • What did the installation of CorelDRAW Graphics Suite X6 changed in the system because after that Firefox crashes every time when opened?

    My system worked normally but after I installation CorelDRAW Graphics Suite X6 Firefox crashes every time I try to open it. I've tried disabling plugins and add-ons but with no success. Reinstallation of Firefox hasn't helped. But as I this has happened to me on a couple of other computers too, I've been able pin point the source of problem to installation of CorelDRAW Graphics Suite X6 (and earlier versions, too).
    Firefox can be opened without problems in safe mode or in Windows XP SP3 compatiblity mode. Does Firefox use some different system components then?
    I am using 32-bit Windows7 and latest version of Firefox.

    It is possible that the CorelDRAW program installed extra fonts on your computer and that Firefox is having a problem with one or more of them.
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    You can also do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Every time when I shutdown my 24"iMac, it will start up with a corrupted HD need to be formatted and restored. Anyone has the same problem?

    Every time after shutting down my 24" iMac, it will end up with a corrupted HD which cannot be fixed by disk utility and require to reformat the HD and restore.
    I noticed the Mac OS journal format will turn into no journal. Does anybody have he same problem?

    I have to ask; Are you using the Shut Down... menu item in the "apple" menu to shut down?  Does it shut down normally when you do?

  • AIR event when computer awakes from sleep mode?

    Hi,
    I have an AIR app that displays a new set of photos every 12 hours. Some users are complaining that the photos are not refreshed after 12 hours if the computer had been in sleep mode over night.
    At first I thought possibly the Timer was stopping when in sleep mode so I instead modified the Timer to execute every minute and just check to see if the last refresh was at least then 12 hours ago. This still did not solve the issue.
    Is there an event dispatched I can listen for to detch when the computer awakes from sleep mode? Or if any one has any other suggestions.
    Thanks,
    Ryan

    No answer till now. Better close it.

  • How to stop the computer from changing its local network name when waking up from sleep mode

    How do I prevent a mac mini from changing its' network name automatically when it wakes up from sleep mode... It will wake up and display a warning that the network name is already in use and it changes its name to (n+1) name with number after it... I know that there is no other device with that name because the only other things on the network are 2 hard drives (one being used for time capsule) and a printer..
    This is very annoying and needs to be fixed.... don't tell me to make the computer never sleep because that defeats the power savings settings under power management.

    Go to System Preferences>Network>AirPort and delete your network from the Preferred Networks box. Reenter your network information. Make sure that AirPort is the topmost listed interface when you Show Port Configurations. Apply the changes and Restart. Does it work now?

  • WIFI slow to reconnect when phone awakes from sleep mode

    Today, I updated my LG G3 to Android Lollipop. I have WIFI set to turn off when in sleep mode (unless device plugged in). Now when the phone comes out of sleep mode, it takes up to a minute before the WIFI connection is reestablished. With the previous version of the OS, WIFI reconnected immediately after awakening from sleep mode.
    Has this problem been reported to Google? I have not found a way to report bugs directly to Google as a user.
    Thanks,
    Tim

    Joel, thanks for your reply. I've followed your instructions, and the problem persists. I assume by reset, you mean reset to factory settings. No. It has been rebooted, and powered off/on several times since the OS update. I have no idea whether there are any apps that use WIFI only. How would I know what each app may require?
    Since this happened immediately after the OS update, the logical conclusion is that the update caused this behavior. In my 45 years as a software engineer, I can say this is the most likely cause.
    Now, here are two more observations. When I first power the LG G3 up, the WIFI connection is made immediately; before I even unlock the device. So, we know the OS is quick to establish connections upon power up. It is only when coming out of sleep mode that the WIFI connection is slow to be reestablished, taking about a minute as opposed to immediately with the prior OS version.
    The second observation is that with my wife's Samsung Note 4, which was updated to lollipop several weeks ago, I do not see this delayed WIFI connection after being awakened from sleep mode. With the Note 4, the connection is reestablished immediately with lollipop as with the prior OS version.
    Considering the difference in behavior between the Note 4 and the G3, I would conclude that LG made a firmware change for lollipop which is causing the delay, or LG didn't make a necessary firmware change for lollipop which is causing the delay. At this point, I would say this is an LG G3 problem. It should be easily reproduced. Under the advanced WIFI settings, the setting "Keep WI-FI on when screen is off" should be set to either "Only when plugged in" or "No".
    Thanks again for your help.

  • Open browsers quit when computer awakes from sleep mode

    This happens onlyon my Powerbook G4 15" 1.33GHZ, and not on my iBook 700MHz. When the PB awakes from sleep mode, any open browser quits. Following is, as an example, the debug output in Terminal of Firefox quitting (I have already sent those reports both to Apple and to the authors of the browser).
    ==================
    Exception: EXCBADINSTRUCTION (0x0002)
    Code[0]: 0x00000002
    Code[1]: 0x0523538c
    Reading symbols for shared libraries ................. done
    /Users/shavital/374: No such file or directory.
    Attaching to program: `/Applications/Firefox.app/Contents/MacOS/firefox-bin', process 374.
    Reading symbols for shared libraries ............................................................................... ....... done
    Reading symbols for shared libraries ........................... done
    0x0523538c in ?? ()
    Program received signal EXCBADINSTRUCTION, Illegal instruction/operand.
    0x0523538c in ?? ()
    (gdb) Quit
    (gdb) quit
    The program is running. Quit anyway (and detach it)? (y or n) y
    Detaching from program: `/Applications/Firefox.app/Contents/MacOS/firefox-bin', process 374 thread 0xd03.
    ===================
    Thanks in advance.

    No answer till now. Better close it.

  • Weird noise coming from computer when 'waking up' from sleep mode

    Hi everyone,
    I recently upgraded to Yosemite 10.10.1 - specs are in the attached photo below.
    Since yesterday, when I turn on my computer, or 'wake' it up from sleep mode, it makes a strange and noticeable whining noise. I've had the computer for around two months and it has never made such noises. The noise lasts for about 1-2 seconds. Aside from that the computer is operating as usual.
    I reset/shut down the computer several times and also did a PRAM reset. I have no idea what the issue may be and can't seem to find anything of relevance in the community. Should I go to an Apple Store? Is there something to be fixed or will the computer need to be replaced?
    Thank you all for your time!

    SSDee wrote:
    @Thor - I too like Acronis although one could use Windows Backup if so desired.
    Sleep mode -  I use sleep mode for scheduled recording of TV shows in Windows Media Center. If I shut down, no recording.
    Yea, waking up to do a recording is certainly a valid scenario.  I gave up on Windows Media Center right before they came out with an XBOX that is actually quiet and could be used as an extender.  We've been a TiVo family since those noisy XBOX days.
    Regarding sleep/hibernate, I just got tired of my machines waking in the Lenovo dock and having to reset application position, screen resolutions, and all of the other crap that seems to happen to ThinkPads on a resume.  That doesn't even take into account the black screen of death or other reliability issues I've seen over the years. 
    I am firmly a shutdown guy now.  It's clean and I know what I get when I press the power button again.  With 15-25 second boots and fast I/O, the reliability outweighs the perceived time savings.
    We haven't discussed what might be corrupting the original posters file system.  That is disconcerting.  Sounds like a Crucial M4 firmware issue.  If that is the culprit, there's going to be hell to pay on the mSATA M4 based Ultrabooks assuming it has the same bug.

Maybe you are looking for