Firefox hang at start with ntdll.dll error

Ciao a tutti! (Hallo everybody!)
My system run W7 Ultimate sp1, whit PrevX 3.0 free edition and McAfee VirusScan Enterprise 8.7.0i.
Firefox hangs at startup, reporting the error below.
I've tried vary support thread:
- complete reinstallation
- safemode startup
- remove profile
in crash report folder i've found only a file:
InstallTime20121119183901
I've also tried:
- memory check
- antivirus check (also with Kaspersky)
- Microsoft system check (command sfc /scannow)
- Microsoft Fix.it
no way to solve the problem.
any suggestion?
thanks in advance

How To Fix Ntdll.dll Errors
Try the below solutions one at a time.
* Unplug removable devices
* Restart your computer. The ntdll.dll error you're receiving could be due to a one-time, temporary issue and a simple reboot may resolve the problem completely.
* Reinstall the program if the ntdll.dll error only displays when you use a specific program.
**If the software program has any updates or service packs available, install them too. The software's programmers may have identified an issue with the program that caused the ntdll.dll error and then issued a patch for it.
**Note: Third party software programs that have been installed on your computer are almost always the cause of ntdll.dll errors. The remainder of these troubleshooting steps resolve ntdll.dll issues only rarely.
* Check the Windows service pack level you're running and then check Microsoft's support site to see if there is a more recent service pack available for installation. Some issues that caused ntdll.dll errors have been corrected in these service packs from Microsoft.
* Selectively disable Internet Explorer add-ons. If your ntdll.dll error is displaying when you start, run, or close Internet Explorer, an add-on may be causing the problem. Disabling each add-on, one by one, will determine which add-on is the culprit (if any).
**Note: As a workaround, assuming the ntdll.dll error really is Internet Explorer related, install and use a competing browser like Firefox.
* Rename the NLSPATH system variable. If your Windows system does not have this environment variable, skip this step.
**Note: This is a troubleshooting step for this issue only. Be sure to set this path back to its original name if this does not resolve the ntdll.dll issue.
* Disable Data Execution Prevention for Explorer.exe. As in the previous step, this is for troubleshooting the ntdll.dll issue only. If this doesn't resolve the problem, return the Data Execution Prevention settings to their previous settings.
* Update drivers for any hardware in your computer where updated drivers are available. Outdated drivers sometimes cause ntdll.dll errors.
* Test your memory for damage. If you're receiving ntdll.dll messages, one possible cause could be a bad memory module in your system. Testing your memory will either identify a problem or clear your RAM of any responsibility.
* Replace your memory if it fails any of your tests.
* Ntdll.dll errors could occur if you have an Iomega Zip drive on the same IDE cable as the hard drive inside your computer. If so, move the Zip drive to a dedicated IDE controller.
* Replace the IDE cable connecting the hard drive to the motherboard. If this cable is damaged or malfunctioning, one symptom could be the ntdll.dll error you're seeing.
* Repair your installation of Windows. If individual software reinstallations fail to resolve the problem, a repair installation of Windows will replace the ntdll.dll file.
* Perform a clean installation of Windows. A clean installation will completely remove Windows from your PC and install it again from scratch. I don't recommend this option unless you've exhausted all previous troubleshooting ideas and you're comfortable that the ntdll.dll error is not caused by a single program (Step #2).
**Note: If a single program or plugin is causing the ntdll.dll error, reinstalling Windows and then reinstalling all of the same software may lead you right back to the same ntdll.dll error.
* While extremely rare, if everything else has failed, including the clean installation from the last step, you could be dealing with a hardware issue with your hard drive.
**If so, replace the hard drive and then perform a new installation of Windows.

Similar Messages

IPod Classic Crashes randomly with ntdll.dll error

Sometimes when I plug-in my 120GB iPod Classic, iTunes would crash, giving me a ntdll.dll error, and I would need to unplug my iPod classic before it would allow iTunes to start again. Upon disconnect, the iPod will try to restart and then it would unsuccessfully do so, and then it would reboot and tell me to restore via iTunes. After I plug it back in, the iPod would restore fine. It seems that if I don't sync my iPod for a couple of days, the possibility of this error happening is most likely, versus if I plugged it in consistently every day.
I have had this issue for quite a while here are the steps that I've taken to try to mediate this issue:
-Switched iPod twice with Apple Store
-Tried the sync on two different computers with completely different hardware (but windows 7 on both)
-Made a new iTunes library
-Search the support forums/google
-Tried various cables
Here is the error logs from the most recent crash:
Faulting application name: iTunes.exe, version: 9.0.3.15, time stamp: 0x4b590a69
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
Exception code: 0xc0000005
Fault offset: 0x00052bf8
Faulting process id: 0x384
Faulting application start time: 0x01cad74f5f441de7
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: a9fac431-4342-11df-9742-00238bf6c0ab
Any help would be appreciated!

OK So I sync'd it this afternoon and in the evening, I plugged it in again, and this time it caused iTunes to crash with this error:
Faulting application name: iTunes.exe, version: 9.0.2.25, time stamp: 0x4afca401
Faulting module name: iTunes.dll, version: 9.0.2.25, time stamp: 0x4afca3e5
Exception code: 0xc0000005
Fault offset: 0x00abc4c0
Faulting process id: 0x728
Faulting application start time: 0x01cad7c0e0284b0c
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: b9bf634a-43b4-11df-b2dc-0015f20ac1cf

Itunes 11.1.5 crashes with ntdll.dll error

After trying everything it seems I could find on the discussion groups about this error, I finally managed to solve it on my machine. Win 7 64 bit...
I turned off error reporting which was creating the minidump file. (Set it to none). It makes no sense but now I can make it through a sync without itunes crashing...

In Windows 7. Control Panel/System/Advanced system settings/Startup and Recovery Settings/
Leave Write an event to the system log checked and Automatically restart, unchecked, and where it says Write debugging information, choose (none), then OK at the bottom.

Explorer keeps crashing with ntdll.dll, verifier.dll, msvcrt.dll and combase.dll errors

Hi all,
I just bought my laptop a few weeks ago. Initially explorer only crashed (with the ntdll.dll error) when I had a lot of folders open, or when I was transferring stuff. But now I cannot open any folders at all without it crashing with the verifier.dll error.
This doesn't happen in safe mode.
Log Name: Application
Source: Application Error
Date: 09-02-2014 12:39:43 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: WenShi
Description:
Faulting application name: explorer.exe, version: 6.3.9600.16441, time stamp: 0x5265dec8
Faulting module name: verifier.dll, version: 6.3.9600.16384, time stamp: 0x5215f8f7
Exception code: 0x80000003
Fault offset: 0x000000000000abd4
Faulting process id: 0x17fc
Faulting application start time: 0x01cf24d328661f76
Faulting application path: C:\Windows\explorer.exe
Faulting module path: C:\Windows\system32\verifier.dll
Report Id: 7729c240-90c6-11e3-8267-ecf4bb7b6c5d
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-08T13:39:43.000000000Z" />
<EventRecordID>4891</EventRecordID>
<Channel>Application</Channel>
<Computer>WenShi</Computer>
<Security />
</System>
<EventData>
<Data>explorer.exe</Data>
<Data>6.3.9600.16441</Data>
<Data>5265dec8</Data>
<Data>verifier.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f8f7</Data>
<Data>80000003</Data>
<Data>000000000000abd4</Data>
<Data>17fc</Data>
<Data>01cf24d328661f76</Data>
<Data>C:\Windows\explorer.exe</Data>
<Data>C:\Windows\system32\verifier.dll</Data>
<Data>7729c240-90c6-11e3-8267-ecf4bb7b6c5d</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
This is the event log for one of the errors. I have also uploaded two dump files after explorer crashed onto my skydrive:
https://skydrive.live.com/?cid=05A8CC170A7688F5&id=5A8CC170A7688F5!105
Can anyone please help me? I have found many similar threads but I'm not sure which program is causing the crashes for me. Thanks very much!

Hi again,
Sigh. Explorer crashed on me again. I was using iTunes when this happened (not sure if relevant), I wasn't transferring files, and had 4 explorer folders open.
Would you please download explorer.exe.3432 from my skydrive and analyse it for me? Thank you so much for your help.
Here's the event log for my most recent crash: mscordacwks.dll error?
Log Name: Application
Source: Application Error
Date: 10-02-2014 10:38:38 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: WenShi
Description:
Faulting application name: Explorer.EXE, version: 6.3.9600.16441, time stamp: 0x5265dec8
Faulting module name: mscordacwks.dll, version: 4.0.30319.34003, time stamp: 0x522ec01b
Exception code: 0xc0000005
Fault offset: 0x000000000001e733
Faulting process id: 0xd68
Faulting application start time: 0x01cf264dda16c79f
Faulting application path: C:\Windows\Explorer.EXE
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscordacwks.dll
Report Id: e1816640-9247-11e3-826b-ecf4bb7b6c5d
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-10T11:38:38.000000000Z" />
<EventRecordID>5410</EventRecordID>
<Channel>Application</Channel>
<Computer>WenShi</Computer>
<Security />
</System>
<EventData>
<Data>Explorer.EXE</Data>
<Data>6.3.9600.16441</Data>
<Data>5265dec8</Data>
<Data>mscordacwks.dll</Data>
<Data>4.0.30319.34003</Data>
<Data>522ec01b</Data>
<Data>c0000005</Data>
<Data>000000000001e733</Data>
<Data>d68</Data>
<Data>01cf264dda16c79f</Data>
<Data>C:\Windows\Explorer.EXE</Data>
<Data>C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscordacwks.dll</Data>
<Data>e1816640-9247-11e3-826b-ecf4bb7b6c5d</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

Itunes ntdll.dll error

every now and then when I am listening to iTunes, it will crash out of nowhere with a ntdll.dll error. Anyone else experience this?? It's quite annoying...
here is the error...
http://img124.imageshack.us/img124/7036/itunesdllerror6sf.jpg
Dell Dimension 4600 Windows XP 5th Gen iPod

In Windows 7. Control Panel/System/Advanced system settings/Startup and Recovery Settings/
Leave Write an event to the system log checked and Automatically restart, unchecked, and where it says Write debugging information, choose (none), then OK at the bottom.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Illustrator CC 2014 crashing on brand new Surface Pro 3. ntdll.dll error

Illustrator CC 2014 crashing on brand new Surface Pro 3. ntdll.dll error
Event log:
Illustrator.exe
   18.0.0.18
   53880380
   ntdll.dll
   6.3.9600.17114
   53649e73
   c0000374
   00000000000f87a8
   1c5c
   01cfada4daa6f194
   C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe
   C:\windows\SYSTEM32\ntdll.dll
   1b0d17fe-1998-11e4-826e-60029244db05

bitlocker encrypts your drive making it difficult to run programs that require constant access to your drive--it should be 'off'--however--just turning it off won't solve the problem. You need to turn it off and decrypt the drive
see below
To turn off or temporarily suspend BitLocker
Click to open BitLocker Drive Encryption.
Do one of the following:
To temporarily suspend BitLocker, click Suspend Protection, and then click Yes.
To turn off BitLocker and decrypt the drive, click Turn Off BitLocker, and then click Decrypt Drive.

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

Firefox hangs when starting, Firefox window title bar says "Firefox (not responding)". (was: Firefox crashes)

Firefox hangs when starting, during session restore. Uninstalled then installed new Firefix. Same problem. Firefox window title bar says "Firefox (not responding)". It just hangs, won;t display even one page. What to do? Tried -safe-mode, smae result.

I keep too many tabs open and whilst trying to download a pdf file Firefox 8.01 hung and when I restarted it the Embarrassing page opened. I knew which tab I needed to delete but as soon as I tried to navigate to the errant tab it said "Not Responding" and nothing I could do would make it respond. I tried command line opening in safe mode and the same thing happened.
I have read the other posts but cannot send a crash dump as it is "Not Responding" and does not get far enough to crash.
IanH

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

Session "UpdateUx" failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session "UpdateUx" failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:\sources\Install.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035

I'm getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID="4816" ThreadID="2800" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID="****" />
</System>
<EventData>
<Data Name="SessionName">WbadminInBuiltTracing</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I'm running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer - (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I've spent literally a year of time out of the 5 I've had this laptop which btw is a home computer,
not a small business pc - searching, trying fixes that didn't work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up - which starts the process all over again. I'm now getting BSOD's
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS's that not only carry these problems over but add new ones to each new OS. Don't misunderstand
me. I like Windows, in fact I'm one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it's just my opinion....I could be wrong!

Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035

Windows Server 2008 R2 Standard.
I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.
Sourece: Kernel-EventTracing
EventID: 2
Session "WbadminUIInBuiltTracing" failed to start with the following error: 0xC0000035
- System
- Provider
[ Name] Microsoft-Windows-Kernel-EventTracing
[ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID 2
Version 0
Level 2
Task 2
Opcode 12
Keywords 0x8000000000000010
- TimeCreated
[ SystemTime] 2010-12-01T11:17:19.937490400Z
EventRecordID 17
Correlation
- Execution
[ ProcessID] 3472
[ ThreadID] 3100
Channel Microsoft-Windows-Kernel-EventTracing/Admin
Computer LODGER.aqa.com.ru
- Security
[ UserID] S-1-5-21-1644491937-706699826-1417001333-3605
- EventData
SessionName WbadminUIInBuiltTracing
FileName
ErrorCode 3221225525
LoggingMode 2
What causes the error? What do I need to do to avoid it?

I have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released?

Firefox hang at start with ntdll.dll error

Similar Messages

Maybe you are looking for