Firefox has only one theme/persona enabled which is actually removed. It does not accept any other theme/persona

Much time ago, when I was using firefox 3.5/4 (I do not remember exactly), I installed a Theme/Persona of Green Flower (I do not remember the exact name). I liked that theme so I kept it for a long time. But after some days when I wanted to change it, it did not change. The problem is still continuing. I am currently using Firefox 9.0. I have no such Add-on or Extension installed which could prevent Firefox from changing the Theme/Persona.
I have described below what happens exactly:
.I browse over Personas
.I select one or two and install them
.Finally I Enable one for use
.It gets enabled and the Persona is activated
.It is enabled till current session is on
.But on the next startup of Firefox, its gone!
.It doesnt show up!
.All I am left with, is this Green Flower Theme/Persona!
.Please help me to change it, I am fed up seeing this White and Green Firefox
.Even updating Firefox doesnt help!
.What shall I do?

See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

Similar Messages

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Hi, I can't get Firefox to work with "ScreenPrint Platinum". It has worked for a year and longer. However, now it does not accept commands via "prtScn" key .

    I'm currently using version 5.4.0.4 of ScreenPrint Platinum and it works fine with Safari and Goggle Chrome, but I prefer Firefox. Has a change been made with later versions of Firefox. I'm using version 18.0.2 and would appreciate your feedback. Thanks, Richard

    Do you know whether ScreenPrint installs an add-on into Firefox? If so, it's possible that during an update it became disabled. You could check that theory here:
    orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions category
    Note that disabled extensions are "grayed out" and listed at the bottom after all the enabled extensions.
    As far as I know, Firefox does not intercept the PrtScn key for its own purposes, but it's possible that another add-on is doing that. Or if you have interacted with a Flash player in the current page, the player may be intercepting it.
    If you need a Firefox-specific workaround, you can try this extension: [https://addons.mozilla.org/en-us/firefox/addon/fireshot/ Fireshot].

  • After installation the new version 2.0.1.4120 Firefox does not run any more; does not accept any key, but is waiting for a confirmation!

    Laptop Dell D630
    Windows XP professional, Version 5.1 (Build 2600.xpsp_sp3_gdr.101209-16747: Service Pack 3)
    The older versions all worked perfectly! Only after installing the new version, program does not react!
    I can send a screen-shot if that helps.
    Can you make the older version available again?
    Best regards
    Paul Schneider

    On Sun, 27 Apr 2014 10:25:17 +0000, Luis Olias wrote:
    I get it. It is something related to my ISA Server firewall. Even though I allow all the traffic back and forth between my LAN and my DMZ , the issue remains.
    Why do I know it is a ISA Server issue?, because I moved this pc client from the DMZ to the LAN (where the CA is) and it got a certificate right away, without any issue. As soon as I put it back on the DMZ, the problem begins.
    I suppose I have to move this thread, therefore, to the ISA Server forum.
    You need to disable the Strict RPC policy on your ISA server:
    http://technet.microsoft.com/en-us/library/bb838943.aspx
    Paul Adare - FIM CM MVP
    cthread. cthread_fork(). Fork, thread, fork!
    So I read on my research, but nothing doing. I will do it again, and I will post back in a few minutes, thanks!
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

  • I just downloaded Firefox 5 but found out that 1passport which is my password program does not support 5 unless I upgrade to Snowleopard. What I need to do is go back to Firefox 4 so I can use 1passport.

    Need to go back to Firefox 4 so I can use my 1password security program.

    MacBook Pro  / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
    I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better.  Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG.   However, after much searching, I finally did the steps in order and it worked.  
    This was after repeatedly downloading Silverlight from the Netflix site without success.  So here's what I did:
    1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    2. Followed the directions. I felt like such an idiot for not doing it right before.
    3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
        [also check your Libary/ Internet Plug-ins, but the above search is faster]
    4. Drag it all to the trash and empty it.
    5. Go back to the Get  Silverlight page and click on the Install on that page, not the Netflix site.
    6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
    7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
    8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

  • Firefox will not let me use any version over 3.5.14 it does not access any other web sites if I use any other version of firefox?

    If I update firefox to the new version 18 and then try to use any websites that don't have anything to do with firefox it says "Problem loading screen" and it does the same with any version past 3.5.14 exept if I update to version 3.6.24 then all the screens are just white and at the bottom it says "Updating Add: Codec-V".
    So basically I'm stuck in a old version of firefox and I can't get out/

    Please update to Firefox 18.0.1, then reset Firefox [[Reset Firefox – easily fix most problems]]
    Then read [[Server Not Found - Troubleshoot connection problems]]
    and [[Firefox can't load websites but other browsers can]]

  • I upgraded to OSX Mavericks and the CMS of my website, which is built with joomla, does not work any more.What could be the problem?

    It displays many lines of error messages, all starting with Deprecated... and the boxes, in which I am supposed to introduce the text, are not active.

    The reason files on the USB flash drive appear to vanish could be many, but it's not normal for spontaneous file deletions to actually occur. Verify that your Finder preferences are configured to show external disks on the Desktop:
    Uninstall Intego VirusBarrier. It is capable of doing nothing beneficial and could even be causing the problem. Be certain to follow the developer's uninstallation instructions and confirm all its remnants are permanently eradicated.
    When encountering unexpected behaviour on a Mac the very last thing you should suspect is a virus and the very last thing you should consider to solve it is using any "anti-virus" product. Doing so is nearly guaranteed to make things worse.
    A PC can't read Mac formatted volumes unless you purchase software for that purpose.
    There is neither a method nor reason for resetting USB ports.

  • The 16G IPOD catalog entry should have in bold THIS THING HAS ONLY ONE CAMERA.  I bought one for my dad thinking it was same as the last one i bought.  my fault, but also theirs.

    I just ordered a new 16G iPod touch for my dad.  the bigger models said they had an hd camera, so i assumed this one did not BUT AT LEAST HAD A REAR FACING CAMERA.
    So it arrives and he says it only has one camera and I say of course it has two cameras.
    it turns out just a front-facing camera (so i guess thats what Facetime camera meant).
    so now he wants to return it
    be careful ordering. my fault, but also theirs.  it's like selling a car without a windshield.  their should be a giant sign that says, this thing has only one windshield

    Disagree for three reasons:
    1) this is a KEY feature that was removed from prior models.  removing something that cutomers depend upon requires more than burying in a cryptic spec.
    2) even spec does not use clear generic terms like "front-facing camera" "rear-facing camera" or "has one camera" - instead it used Apple-terms like Facetime camera and isite camera, which on a casual glance appears like just upgrade/downgrade camera version.  16g model says facetime camera, and cell next to it it says isite camera (instead of also showing both models have facetime camera on the same row) and that's not a proper comparison grid, comparing  apples to apples, so to speak...
    3) you presume every person that orders finds this page (which i contend is not clear).  i don't want to spend an hour learning what apple-jargon translates to "this model has only  one camera"
    No reply needed.  Just posting for awareness.  I am guessing there will be more dissatisfaction and returns for this product, so just giving you feedback.

  • Elements 9 collage only one theme - basic only?

    I've been attempting to create a collage in elements 9 and am presented with only one theme - basic.  Are there other themes available?  If so, where are they located?  Advanced mode still has only the basic theme, but I can access multiple layouts. Or, is one required to purchase Plus to get more themes?  Other items - like greeting cards - have multiple themes

    Well, if you just choose the background you want, that will replace the existing one. If you want to remove some of the frames, just delete them, and then target the layers for the existing frames and you can change them to any style you want. With the Advanced mode, you can create any style you want, really.

  • Only one theme?

    I recently purchased Premiere Elements 8 and downloaded it to my Dell Studio XPS 1340 running Windows Vista.  Only one theme is available, the Fun theme.  How do I get more?

    You say "downloaded," so I assume that you do not mean "installed" there, and that you did download and then install from the downloaded file. There is a second archived file, that must be downloaded, and then installed next. It has all the Functional Content. It should be available on the same Web page, and the name will be a bit too similar to the main program.
    Download that, Extract it with full folder structure, and then install. You will then have your functional content.
    Good luck,
    Hunt

  • I added a new post to my iTunes U course and it is not showing up on one of my student's iPads.  She has only one Apple ID on the iPad. Any assistance is appreciated.

    A new post to my iTunes U course shows up in my course both on my Mac and my iPad Air, as well as on other students' iPads, but for one single student.  We have closed the app and forced shutdown.  Student recently added more icloud space, but that is all.  iPad is up-to-date in terms of iOS and iTunesU app.  The student has only one Apple ID associated with her iPad.
    We have reposted two more times.  The second time the post showed up for a few seconds, but then disappeared.  It does not show up under any other section (assignments, discussions, etc).  Any assistance is greatly appreciated.

    Have you contacted Apple support?
    I don't know if these will work, but you could have the student try the following:
    logout of his or her iTunes U (i.e., iTunes Store) account using Settings
    force-quit iTunes U
    relaunch iTunes U
    sign in to the newly launched app when prompted
    I hope that helps!

  • I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

    I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
    To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
    ?Is there any Apple TV HDMI port voltage?
    When using a HDMI auto switch to connect two devices to a HDMI TV, the
    Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
    Do you know of any other solutions? Componets? Actual expierances?
    Full text below.
    Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
    Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
    http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
    Thanks for any help. Sincerely,
    HDMI auto switch?

    Hi Erico,
    I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
    Do you have any other ideas?
    Many many thanks,
    Louise

  • Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

    Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

    I'm going to assume the consolidating files does not work due to hard drive space limitations.
    Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility?  That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
    Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
    Also, using the Apple article on moving the library, take a slight twist on what it says.  Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
    The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

  • Security Filter fails when level has only one member

    Hi.
    This is Essbase version 9.3. I have a forecast app\db to allow users enter\modify the forecast of the different products. The Product Dimension has the following hierarchy.
    All Products
    Planner 1
    Supplier A
    Product_A1
    Product_A2Supplier B
    Product_B1
    Product is the lowest level, level 0, or Gen 4.
    I need to allow the "Planner 1" to write only to his products, where the member is "My Scenario" from Scenario Dimension, and where the UDA's for the month is Forecast. The same planner can't write to the "All Products", "Planner" and "Supplier" levels.
    I have created the following filter:
    None: "All Products"
    Read: @IDESCENDANTS("Planner 1")
    Write: @REMOVE(@LIST(@DESCENDANTS("Planner 1")),@LIST(@LEVMBRS ("Planner 1", 1))), "My Scenario",@UDA("Time","FORECAST")
    Basically, this is the portion most relevant of the filter: @REMOVE(@LIST(@DESCENDANTS("Planner 1")),@LIST(@LEVMBRS ("Planner 1", 1)))
    where
    @LIST(@DESCENDANTS("Planner 1") = List of descendants members from Planner 1, excluding Planner 1. = "FIRST LIST"
    @LIST(@LEVMBRS ("Planner 1", 1)) = List of level 1 members from Product Dimension. = "SECOND LIST"
    @REMOVE will remove values or members in the "SECOND LIST" from the "FIRST LIST".
    This filter works perfectly but it has a little\big exception...
    Based on the example, the filter works fine for Supllier A. Meaning that the user can modifiy the forecast for the products under Supplier A (Product_A1 and Product_A2), and the user can't modify the upper levels, "Supplier A", "Planner 1", "All Products". This is GOOD!
    Now. For Supplier B, Essbase will allow write back to the Product_B1, OK. But will also allow write back to Supplier B, the upper level.
    So. When the supplier has only one product, Essbase presents this exception that allows write to the upper level. This happens everywhere a supplier has only one product. When there are more than one product per supplier, the filter works as expected.
    Is there a missing piece in my filter? Is there a different, better approach to accomplish this?
    Thanks.

    It's probably an implied share problem. That is, because Supplier B has only one child it is treated as a shared member. You can use the "never share" storage property setting to avoid that problem.

  • Why is my iPad gong so slowly? He has only one year

    It s the iPad one. At the begening he was going wery fast but yet he go wery  slowly.hé has only one year.
    Bonjour pourquoi mon iPad vas il s'y lentement maintenant? Car quand jel ai acheté il allais tres vite mais maintenant apres une annee il vas lentement. Tres lentement

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Maybe you are looking for